SuperBlade Enclosure:

Space Optimization
Housed within a 19" industry-standard rack, SuperBlade servers reduce server footprint in the data center. Power, cooling and networking devices are aggregated in the rear of the chassis which optimizes the required amount of space.

Up to ten blade servers can be installed in a 7U chassis. Compared to the 10U of rack space that ten 1U servers would normally require as individual servers, the SuperBlade provides about 50% density savings with 60 servers and 24 switches in a 42U rack..

Cable Reduction
The SuperBlade server chassis enclosure greatly simplifies the cabling process by aggregating cabling of ten servers at once. Up to 90% of network, power, and KVM cabling required for ten 1U servers are reduced by moving to blade servers in a single chassis. These cabling reductions continue across networking, SAN connectivity, and management controllers.

Reducing the number of cables speeds up the deployment of servers and helps reduce troubleshooting issues by presenting fewer physical connections to the servers.

Enclosure SBE-710E:

Server Blade Up to 10 hot-plug server blades (14 blade model coming soon)

Module Support Supports both Intel and AMD based blades

LED Power LED, Fault LED

Infiniband Switch Up to two hot-plug 4x DDR IB switches with built-in management module

Gigabit Ethernet Switch Up to two hot-plug gigbit Ethernet switches

Management Module Up to two hot-plug management modules providing remote KVM and IPMI 2.0 functionalities
One management module comes standard with each enclosure

Power Supply Four hot-swap 1400W / 2000W power supplies, N+1 redundant

Cooling Design 16 cooling fans

Dimensions (HxWxD) 12.1" x 18.5" x 29"

Available Models:
SBE-710E-R60 - Enclosure chassis with four 2000W power supplies
SBE-710E-D40 - Enclosure chassis with two 2000W power supplies
SBE-710E-R42 - Enclosure chassis with four 1400W power supplies.