| Main Specifications |
| • Built-in Devices : | Super H8SSL-R10 |
| • Colors : | Beige |
| • Dimensions (WxDxH) : | 20.9" (531mm) x 7" (178mm) x 16.8" (427mm) |
| • Form Factor : | Mid-Tower - SC733T-450 |
| • Type : | A+ Server 4710S-T |
| • Weight : | 39 lbs (17.7kg) |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP) / ACPI 2.0 / PCI 2.2 / DMI 2.3 / BIOS Rescue Hot Keys / SMBIOS 2.3 / USB Legacy support / Hardware BIOS Virus Protection / RTC (Real Time Clock) Wakeup |
| • BIOS Type : | 4Mb Flash EEPROM with AMI® BIOS / SST-49LF004B BIOS Chip |
| Processor |
| • Cache : | 1MB Cache |
| • CPU supported : | Supports one Dual-Core AMD Opteron™ 100 Series processor - 4 phase VRM |
| • Socket : | Single 939-pin ZIF Sockets |
| System Memory |
| • DIMM Sizes : | 256 MB, 512 MB, 1GB |
| • Error Detection : | Corrects single-bit errors, Detects double-bit errors (using ECC memory) |
| • Memory Capacity : | Four 184-pin DIMM sockets - Supports up to 4 GB DDR 400/333 MHz memory or Single or Dual (recommended) channel memory |
| • Memory Type : | DDR 400/333MHz unbuffered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| • Memory Voltage : | 2.5 V only |
| Drive Bays |
| • Hot-swap : | 4 x 3.5" SATA hot-swap drive bays |
| • Peripheral Bay : | 1x 3.5" full-height peripheral bay |
| 2x 5.25" Peripheral Drive Bay | | Peripheral Drives |
| • Floppy : | 3.5" 1.44MB Floppy Drive |
| Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 2x PCI 32-bit, 33MHz expansion slots |
| 1x PCI-X 64-bit 133MHz (3.3V) slot | | Front Panel |
| • Buttons : | Power On/Off button, System Reset button |
| • LEDs : | Power LED, Hard drive activity LED, Network activity LED, System Overheat / Fan Fail LED |
| • Ports : | 2x USB Ports (2.0 Ready) |
| Input / Output |
| • Floppy : | 1 Floppy port, 1.44 MB |
| • IDE : | Supports ATA/100, Supports UDMA Mode 5 |
| Single ATA 100 EIDE channels support up to two UDMA IDE devices | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2 RJ45 LAN ports |
| • SATA : | Up to four SATA devices - SATA RAID 0, 1, 10 |
| • Serial Ports : | 1 Header, 1 Fast UART 16550 serial ports |
| • USB : | USB 2.0 Compliant, 1.1 Compatible - 2 USB Rear Ports, 2 USB Internal Headers |
| On-Board Devices |
| • Clock Generator : | ICS932S801AG |
| • Graphics : | VGA Port, ATI Rage XL 8MB PCI Graphics Controller |
| • IDE : | Supports UDMA Mode 5, Supports PIO Mode 4, Supports ATA/100 |
| • IPMI : | 1U support: Intelligent Platform Management Interface v.2.0+ (Optional: 1UIPMI-B) or For 2U and above: (Optional: AOC-LPIPMI-LANG) |
| Remote Management Module - (Card not included) | | • Network Controllers : | Broadcom BCM5704C Dual Gigabit Ethernet Controller - Supports 1000BASE-T, RJ45 output |
| • SATA : | 4 SATA Ports using ServerWorks HT1000 controller - SATA RAID 0, 1, 10 |
| • Super I/O : | NS PC87427 |
| System Cooling |
| • Fans : | 1x 9cm mounted thermal cooling fan |
| 2x 8cm fans (450W power supply configuration) | | 1x 12cm exhaust thermal fan | | Backplane |
| • Backplane : | SATA Hard Drive Backplane |
| Power Supply |
| • Power Supply : | 450W low-noise AC power supply with redundant cooling feature (with PFC) |
| Parts List |
| • Backplane : | CSE-SATA-733 |
| • Cables : | CBL-0044L, CBL-0049L, CBL-0051L, CBL-0084, CBL-0140L |
| • Drive Tray : | CSE-PT39(B) |
| • Fans : | FAN-0055, FAN-0060 |
| • Heatsink / Retention : | BKT-0004, BKT-0005 |
| • I/O Shield : | CSE-PT55L |
| • Motherboard / Chassis : | MBD-H8SSL-R10 / CSE-733T-450(B) |
| • Part : | FPD-PNSC-02 (01) |
| • Power Supply : | PWS-0045 |