| Main Specifications |
| • Dimensions (WxDxH) : | 12" x 13.05" (30.5cm x 33.2cm) |
| • Form Factor : | Extended ATX |
| • Product Type : | Motherboard |
| Processor |
| • Compatible Processors : | Supports up to two Six-Core / Quad-Core AMD Opteron™ 2000 Series processors / HT3.0 Link support |
| • Socket : | Dual 1207-pin Socket F |
| System Memory |
| • DIMM Sizes : | 256 MB, 512 MB, 1GB, 2GB, 4GB, 8GB |
| • Memory Capacity : | Sixteen 240-pin DIMM sockets |
| Support up to 128GB DDR2 800/667/533 MHz memory * | | Dual channel memory bus | | Single or Dual (recommended) channel memory support | | For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks | | • Memory Type : | DDR2 800/667/533 MHz Registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.8V only |
| On-Board Devices |
| • Chipset : | AMD chipset SR5690 + SP5100 |
| • Clock Generator : | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM over LAN support | | Winbond® WPCM450 BMC | | • Network Controllers : | Two Gigabit Ethernet Intel® 82574L controller, Dual-Port |
| 10/100/1000BASE-T support | | • SATA : | AMD SP5100 (RAID 0, 1, 10) |
| • Super I/O : | Winbond® 83627DHG chip |
| • VGA : | Matrox G200 16MB DDR2 |
| Input / Output |
| • Floppy : | 1 Floppy port, 1.44 MB |
| • IDE : | Supports UDMA Mode 5, Supports PIO Mode 4, Supports ATA 100/133 |
| Single EIDE channel support up to two UDMA IDE devices | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2 RJ45 LAN ports |
| • SATA : | 6x SATA2.0 (3Gb/s) Ports |
| • Serial Ports : | 1x Fast UART 16550 serial port, 1x serial port header |
| • USB : | 6x USB 2.0 ports |
| 2x Rear / 2x header / 2x type A | | • VGA : | 1x VGA port |
| Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 1x PCI-e 2.0 x8 (x4 signals) slot |
| 2x PCI-e 2.0 x16 (x8 signals) slots | | 2x PCI-X 64-bit 133/100MHz slots | | 1x PCI-e 2.0 x8 slot | | Chassis Optimized for |
| • 2U Chassis : | SC825TQ (LP SKUs), SC826 (LP SKUs) Please use air-shroud MCP-310-82510-0B & CPU Heatsink SNK-P0023P+ (Air-shrouds & CPU heatsink sold separately) |
| • 3U Chassis : | SC835, SC836A/E1/E2/TQ, SC936A/E1/E2 |
| • Tower / 4U Rackmount : | SC745TQ, SC846A/E1/E2/TQ |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 2.0, USB Keyboard Support, SMBIOS 2.3 |
| • BIOS Type : | 16Mb SPI Flash ROM with AMI® BIOS |
| Operating Environment / Compliance |
| • RoHS : | RoHS Compliant 5/6, Server Exemption |
| Environmental Spec |
| • Operating Temperature : | Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) | | Non-operating Relative Humidity: 5% to 95% (non-condensing) | | Operating Temperature: 10°C to 35°C (50°F to 95°F) | | Regulatory |
| • FCC : | Passed to meet FCC standard requirement |
| Retail Pack List |
| • Driver Disk : | CDR-APLUS2 |
| • I/O Cables : | CBL-0010L / CBL-0022L / CBL-0036L-03 / CBL-0044L |
| • I/O Shield : | MCP-260-00027-0N |
| • Manuals : | MNL-H8DIi+-F |
| • Motherboard : | MBD-H8DIi+-F |
| • Retention : | BKT-0012L |