| Main Specifications |
| • Dimensions (WxDxH) : | 12.1" x 13" (30.7cm x 33.2cm) |
| • Form Factor : | Proprietary |
| • Product Type : | Motherboard |
| Processor |
| • Compatible Processors : | Supports up to two Six-Core / Quad-Core / Dual-Core AMD Opteron™ 2000 Series processors / HT3.0 Link support - Two Hyper-Transport links between the CPUs |
| • Socket : | Dual 1207-pin Socket F |
| System Memory |
| • DIMM Sizes : | 256 MB, 512 MB, 1GB, 2GB, 4GB |
| • Memory Capacity : | Sixteen 240-pin DIMM sockets - Supports up to 128GB DDR2 800/667/533 MHz memory * |
| For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks - Dual channel memory bus | | • Memory Type : | DDR2 800/667/533 MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.8V only |
| On-Board Devices |
| • Chipset : | nVIDIA MCP55Pro |
| • IPMI : | Support for Intelligent Platform Management Interface v.2.0 - 200-pin IPMI slot (SIMSO) |
| (Optional: AOC-SIMSO(+) R 3.00) ** | | RMM (Remote Management Module) - (Card not included) | | For dedicated LAN, CBL-0177L must be used on left full-size slot. (Cable not included) | | • Network Controllers : | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| nVidia MCP55 Pro Chipset Dual-port LAN / Ethernet Controller | | • SATA : | nVidia MCP55 Pro SATA2 3.0Gbps Controller |
| 6 SATA Ports - nVidia Host RAID 2.0 | | SATA RAID 0, 1, 0+1, 5, JBOD Support | | • Super I/O : | Winbond 83627HF |
| • VGA : | ATI ES1000 Graphics Controller - 16MB Graphics & VGA port |
| Input / Output |
| • Floppy : | 1 Floppy port, 1.44 MB support |
| • IDE : | Single EIDE channel support up to two UDMA IDE devices |
| Supports UDMA Mode 5, Supports PIO Mode 4, Supports ATA 100/133 | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2 RJ45 LAN ports |
| • Others : | 1 UID |
| • SATA : | 6 SATA2 ports |
| • Serial Ports : | 1 serial port header |
| 1 Fast UART 16550 serial port | | • USB : | FUCI |
| Up to 6 USB Ports 2.0 Compliant - 2 Rear Ports, 4 Internal Headers | | • VGA : | 1 VGA port |
| Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 2U Right Side: 1 (x8) PCI-Express & 1 (x4) PCI-Express Slots |
| 1U Left Side: 1 (x8) PCI-Express & UIO Slots | | 2U Left Side: 3 (x8) PCI-Express & UIO Slots | | IPMI 2.0 expansion slot | | Chassis Optimized for |
| • 1U Chassis : | CSE-113TQ-563UB, CSE-113TQ-R650UB, CSE-812L-520UB Air shroud MCP-310-81203-0B are needed, CSE-815TQ-563UB, CSE-815TQ-R700UB |
| CSE-815TQ-R650UV(B) * Please use air-shroud MCP-310-00026-01 (Air-shrouds sold separately) | | • 2U Chassis : | CSE-213A-R900UB, CSE-216A-R900UB, CSE-216E16-R1200UB, CSE-216E26-R1200UB, CSE-825TQ-R700U, CSE-825TQ-R720UB |
| CSE-825TQ-R700U * Please use air-shroud MCP-310-00025-01 (Air-shrouds sold separately) | | • Important Chassis Notes : | To ensure system stability, a 420W (minimum) ATX power supply [ 4-pin (+12V), 8-pin (+12V) and 20-pin are required] |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP), APM 1.2, DMI 2.3, PCI 2.2, ACPI 2.0, BIOS Rescue Hot Keys, USB Keyboard Support, Hardware BIOS Virus Protection, SMBIOS 2.3 |
| • BIOS Type : | 8Mb Flash EEPROM with AMI® BIOS |
| Operating Environment / Compliance |
| • RoHS : | RoHS Compliant 5/6, Server Exemption |
| Environmental Spec |
| • Non-operating Relative Humidity : | 5 to 95% (non-condensing) |
| • Non-operating Temperature : | -40º to 70º C (-40º to 158º F) |
| • Operating Relative Humidity : | 8% to 90% (non-condensing) |
| • Operating Temperature : | 10º to 35º C (50º to 95º F) |
| PC Health Monitoring |
| • CPU : | Monitors CPU Core Voltages, +3.3V, +5V, ±12V, +5V Standby, HyperTransport Link voltage, memory voltage, VBAT, Chipset voltage |
| CPU 4-Phase-switching voltage reulator | | • FAN : | Stauts monitor for on/off control |
| Total up to 8-fan status tachometer monitoring | | Low noise fan speed control | | Up to two 4-pin and six 3-pin fan headers | | Status monitor for speed control | | • LED : | CPU / System Overheat LED |
| UID/Remote LED | | +5V Standby Alert LED | | Suspend-State Indicator LED | | • Other Features : | Chassis Intrusion Detection |
| Chassis Intrusion Header | | • Temperature : | Thermal Control for 8x Fan Connectors |
| CPU Thermal Trip Support | | Monitoring for CPU and chassis environment | | I2C Temperature Sensing Logic | | Management |
| • Power Configurations : | ACPI Power Management |
| Wake-On-Ring (WOR) headert | | Power-on mode control for AC power loss recovery | | Wake-On-LAN (WOL) header | | Internal/External modem remote ring-on | | Keyboard Wakeup from Soft-Off | | CPU Fan auto-off in sleep mode | | • Software : | Watch Dog |
| Super Doctor III | | Optional IPMI (Intelligent Platform Management Interface) 2.0 |