| Main Specifications |
| • Built-in Devices : | MBD-X9SRD-F |
| • Colors : | Black |
| • Dimensions (WxDxH) : | 5.21" (132.5 mm) x 17.26" (438.4 mm) x 23.2" (589 mm) |
| • Form Factor : | 3U / CSE-938H-R1620B |
| • Type : | SYS-5037MR-H8TRF |
| • Weight : | 62.2 lbs (28.21 kg) - barebone |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP), APM 1.2, ACPI 1.0 / 2.0, USB Keyboard support, SMBIOS 2.3, RTC (Real Time Clock) Wakeup |
| • BIOS Type : | 128Mb SPI Flash EEPROM with AMI BIOS |
| Processor |
| • Cache : | Up to 20MB |
| • Compatible processor : | Intel® Xeon® processor E5-2600 (up to 8 cores and up to 130W) |
| • Compatible Socket : | Single Socket R (LGA 2011) |
| • QPI : | QPI up to 8 GT/s |
| System Memory |
| • DIMM Sizes : | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| • Error Detection : | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | | • Memory Capacity : | 4x 240-pin DDR3 DIMM sockets |
| Supports up to 128 GB DDR3 ECC Registered memory (RDIMM) | | Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM) | | • Memory Type : | 1600/1333/1066MHz ECC DDR3, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.5 V |
| Drive Bays |
| • Hot-swap : | Enterprise SATA HDD only recommended |
| 2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node, up to 16 HDDs total | | Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 1 (x8) PCI-E 3.0 Low-profile slot |
| Input / Output |
| • KVM : | 1x VGA, 1x COM, and 2x USB 2.0 (with KVM dongle) ports |
| • LAN : | 2x RJ45 Gigabit Ethernet LAN ports |
| 1x RJ45 Dedicated IPMI LAN port | | • Serial ATA : | 2x SATA 3.0 ports (6Gbps) |
| On-Board Devices |
| • Chipset : | Intel® C602J Chipset |
| • Graphics : | Matrox G200eW 16MB DDR2 |
| • Headers : | 1 USB header & 1 Type A USB, TPM ready |
| • IPMI : | Nuvoton WPCM450 BMC |
| Support for Intelligent Platform Management Interface v.2.0 | | IPMI 2.0 with virtual media over LAN and KVM over LAN support | | • MicroLP NIC : | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Intel® I/OAT 3 support for fast, scaleable, and reliable networking | | VMDq support for better performance of virtualization | | Intel® i350, 2x Gigabit LAN ports | | iSCSI boot and PXE support | | • SATA : | 1x SATA DOM |
| SATA 3.0 6Gbps with RAID 0, 1, 5, 10 | | • Super I/O : | Nuvoton WPCM450RA0BX |
| System Cooling |
| • Fans : | 4x 8cm 11K RPM, 4-pin PWM cooling fans |
| Power Supply |
| • Certification : | 80PLUS Platinum Certified |
| • Power Supply : | 1620W high-efficiency redundant power supply w/ PMBus |
| Environmental Parameters |
| • Operating Temperature : | Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | | Operating Relative Humidity: 8% to 90% (non-condensing) | | Operating Temperature: 10°C to 35°C (50°F to 95°F) | | Rear Window |
| • Switch : | Rear Window (each node): Switch Power / UID |
| Parts List - (Items Included) |
| • Add On Card : | AOC-CGP-I2 |
| • Backplane : | BPN-SAS-938H |
| • Cable : | CBL-0218L |
| • Driver CD : | CDR-X9-UP |
| • Heatsink / Retention : | SNK-P0047PS+ |
| • Micro-LP NIC : | AOC-CG-i2-O-P |
| • Motherboard / Chassis : | MBD-X9SRD-F / CSE-938H-R1620B |
| • Power Supply : | PWS-1K62P-1R |
| • Riser Card : | RSC-RR1U-E8-O-P |
| Miscellaneous |
| • Included Accessories : | MCP-310-93801-0B |