| Main Specifications |
| • Built-in Devices : | Super X6DH3-G2 |
| • Dimensions (WxDxH) : | 3.5" (89mm) x 16.8" (426mm) x 25.6" (650mm) |
| • Form Factor : | 2U Rackmount - SC823T-550LP |
| • Type : | SuperServer 6024H-32 |
| • Weight : | 51 lbs (23.1kg) |
| Processor |
| • Compatible processor : | Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache |
| Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz | | Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz | | Xeon LV (Low Voltage) CPU, up to 2.8 GHz | | • Compatible Socket : | Dual 604-pin FC-mPGA4 Sockets / Supports up to two Intel® 64-bit Xeon® processor(s) |
| • Operating System Software : | Supports 64-bit Operating Systems |
| Supports 32-bit Operating Systems | | • System Bus : | 800 MHz system bus |
| System Memory |
| • DIMM Sizes : | 2GB |
| • Error Detection : | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | | Supports Intel® x4 Single Device Data Correction (SDDC) | | • Memory Capacity : | Eight 240-pin DIMM sockets |
| Supports up to 16 GB DDR2 400MHz memory | | Dual channel memory bus | | Memory must be populated in pairs | | Single-rank modules are recommended for 6+ DIMM support | | • Memory Type : | DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.8V only |
| On-Board Devices |
| • Chipset : | Intel® E7520 chipset |
| MCH + 6300ESB + PXH/V + 82541PI | | • Graphics : | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| • IPMI : | Support for Intelligent Platform Management Interface v.2.0 |
| (Optional: AOC-IPMI20-E) | | • Network Controller(s) : | Dual Intel® 82541PI Single-Port Gigabit Controller |
| • SAS : | SAS: Adaptec AIC9410: Adaptec 8-port SAS Controller |
| SAS: RAID 0, 1, 10, JBOD support | | SAS ZCR: RAID 0, 1, 5, 10 | | and JBOD support | | SAS ZCR: Support for Zero-Channel RAID | | SAS ZCR: Optional Card not included | | • SATA : | 6300ESB 2-port SATA Controller |
| • Super I/O : | Winbond 83627HF chip |
| Input / Output |
| • Floppy : | 1 Floppy controller, 1.44 MB, 2.88 MB, 3-mode support |
| • IDE : | Dual EIDE channels support up to four UDMA IDE devices |
| Supports ATA/100 | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2x RJ45 LAN port |
| • Others : | Two SAS connectors support up to 8 SAS or SATA drives |
| Two SATA connectors support 2 SATA drives | | • Serial Port / Header : | 1 Fast UART 16550 serial ports |
| 1 header | | • USB : | 2x USB rear ports |
| 2x USB internal headers | | USB 2.0 Compliant / 1.1 Compliant | | • VGA : | 1x VGA Port |
| Front Panel |
| • Buttons : | Power On/Off button |
| System Reset button | | • LEDs : | Power LED, Hard drive activity LED, 2x Network activity LEDs, System Overheat |
| • Ports : | 2x USB Ports (optional) |
| Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 2 (x8) PCI-e slots |
| 1x 64-bit 133MHz PCI-X (3.3V) slot | | 2x 64-bit 100MHz PCI-X (3.3V) slots | | 1x PCI slot | | (Low-profile Add-on Cards Only) | | Drive Bays |
| • Hot-swap : | 6x 3.5"SATA Hot-swap drive trays |
| • Peripheral Bay(s) : | 1x 5.25" full-height peripheral bay |
| Peripheral Drives |
| • CD-ROM / Floppy : | TEAC Slim 24x CD-ROM drive |
| 3.5" 1.44MB Floppy Drive | | SAS / SATA Backplane |
| • SAS / SATA Backplane : | 1x 2U SAS Backplane (without SESII) |
| System Cooling |
| • Fans : | 4x 80mm 6300 RPM fans Cooling redundancy with fan shroud |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP), SMBIOS 2.3, DMI 2.1, ACPI 1.0, Fan Speed Control |
| • BIOS Type : | 8Mb Flash EEPROM with Phoenix® BIOS |
| Power Supply |
| • Power Supply : | 550W power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V ] |