| Main Specifications |
| • Dimensions (WxDxH) : | 5.2" (132mm) x 17.7" (450mm) x 25.5" (648mm) |
| • Form Factor : | 3U Rackmount - SC833S-R760 |
| • Weight : | 74.5 lbs (33.8kg) |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP), SMBIOS 2.3, DMI 2.1, ACPI 1.0, Fan Speed Control |
| • BIOS Type : | 8Mb Flash EEPROM with Phoenix® BIOS |
| Processor |
| • Compatible processor : | Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz |
| Xeon LV (Low Voltage) CPU, up to 2.8 GHz | | Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz | | • Compatible Socket : | Dual 604-pin FC-mPGA4 Sockets |
| Supports up to two Intel® 64-bit Xeon® processor(s) | | • Operating System Software : | Supports 64-bit Operating Systems |
| Supports 32-bit Operating Systems | | • System Bus : | 800 MHz system bus |
| System Memory |
| • DIMM Sizes : | 256 MB, 512 MB, 1GB, 2GB |
| • Error Detection : | Supports Intel® x4 Single Device Data Correction (SDDC) |
| Detects double-bit errors (using ECC memory) | | Corrects single-bit errors | | • Memory Capacity : | Dual channel memory bus |
| Eight 240-pin DIMM sockets | | Supports up to 16 GB DDRII-400 memory | | Memory must be populated in pairs | | • Memory Type : | DDRII-400 registered ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.8 V only |
| Drive Bays |
| • Hot-swap : | 8x 1" SCA Ultra320/160 Hot-swap Drives |
| • Peripheral Bay(s) : | 3x 5.25" Peripheral Drive Bay |
| 1x 5.25" Bay For Floppy Drive | | Expansion / Connectivity |
| • Expansion Slots Total (Free) : | Note: PCI-Express is limited to single-function add-on card devices |
| 1 (x8) on a (x16) slot | | 2x 64-bit 100MHz PCI-X (3.3V) slots | | 3x 64-bit 133MHz PCI-X (3.3V) slot | | Front Panel |
| • Buttons : | Power On/Off button |
| System Reset button | | Mute button | | • LEDs : | System Overheat LED |
| Hard drive activity LED | | 2x Network activity LEDs | | Power LED | | Power Fail LED | | • Ports : | 2x USB Ports (optional) |
| Input / Output |
| • Floppy : | TEAC 3.5" 1.44MB Floppy Drive |
| 1 Floppy controller, 1.44 MB, 2.88 MB | | • IDE : | Dual EIDE channels support up to four UDMA IDE devices |
| Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2x RJ45 LAN port |
| • Serial ATA : | Two Serial ATA ports |
| Two SATA hard drives supported | | • Serial Port / Header : | 2 Fast UART 16550 serial ports |
| • USB : | 3x USB internal headers |
| 2x USB rear ports | | USB 2.0 Compliant / 1.1 Compliant | | • VGA : | 1x VGA Port |
| On-Board Devices |
| • Chipset : | Intel® E7520 chipset |
| MCH + ICH5R + PXH +82546GB | | • Graphics : | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| • IPMI : | Support for Intelligent Platform Management Interface v.2.0 (Optional) |
| • Network Controllers : | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Intel® 82546GB Dual Port Gigabit Controller | | • RAID : | Support for Zero-Channel RAID w/ Adaptec 2010S ZCR Card (Card NOT included) |
| • SATA : | ICH5R SATA Controller |
| RAID 0, 1, JBOD support | | • SCSI : | Dual-Channel Ultra320 SCSI |
| Adaptec AIC-7902 Controller | | Host RAID 0, 1, 10, JBOD support | | • Super I/O : | National 87427 chip |
| SCSI Backplane : | Single Channel SCSI Backplane w/ SAF-TE |
| System Cooling |
| • Fans : | 4x 5000 RPM Hot-swappable Cooling Fans |
| 2x 5000 RPM Rear Exhaust Fan | | Power Supply |
| • AC Voltage : | 5V + 3.3V ¡Ü 200W |
| 100 - 240V, 50/60Hz, 14 Amp | | • AMP : | +12V4 19.0 amp |
| +12V2 18.0 amp | | +12V1 18.0 amp | | +12V3 19.0 am | | +3.3V 36.0 amp | | +5V standby 3.5 amp | | -12V 1.0 amp | | +5V 36.0 amp | | • Power Supply : | [ 24-pin, (4-pin, 8-pin) = 12V ] |
| 760W Triple-redundant AC power supply w/ PFC | | PC Health Monitoring |
| • CPU : | CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.83V-0.63V |
| Adjustable CPU clock frequency ratio settings (via BIOS) | | Monitors for CPU Cores, +3.3V, +5V, ¡À12V & +5V Standby | | • FAN : | Pulse Width Modulated (PWM) fan connector |
| Total of eight 4-pin fan headers | | 8x fans with status monitoring | | Low noise fan speed control | | Status monitor with firmware/software on/off control | | • LED : | CPU Overheat LED |
| Suspend-state indicator LED | | System Overheat LED | | • Other Features : | Chassis intrusion header |
| SDDC | | Chassis intrusion detection | | • Temperature : | CPU thermal trip support |
| Monitoring for CPU, chassis, environment | | Thermal Monitor 2 support |