| Main Specifications |
| • Built-in Devices : | Super X8QBE-F |
| • Dimensions (WxDxH) : | 3.5" (89mm) x 17.2" (437mm) x 27.9" (709mm) |
| • Enclosure Color : | Black |
| • Form Factor : | 2U Rackmount - CSE-828TQ-R1400LPB |
| • Type : | SuperServer 8026B-TRF |
| • Weight : | Gross Weight: 66.5 lbs / Net Weight: 40 lbs |
| Processor |
| • Compatible processor : | Intel® Xeon® processors 7500 series (8-core, codename Nehalem-EX) and new generation Intel® Xeon® processors E7-4800 family (10-core, codename Westmere-EX) |
| • Compatible Socket : | Quad 1567-pin LGA Sockets / Supports up to four Intel® Xeon® 64-bit processor(s) |
| • QPI : | up to 6.4 GT/s |
| System Memory |
| • DIMM Sizes : | 1GB, 2GB, 4GB , 8GB , 32GB** |
| • Error Detection : | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | | Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | | • Memory Capacity : | 32x 240-pin DIMM sockets |
| Supports up to 1024 GB DDR3 ECC Registered memory at 1066/978/800MHz speed | | Memory Mirroring supported | | • Memory Type : | 1333* / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.5 V, 1.35V |
| On-Board Devices |
| • Chipset : | Intel® 7500 (Boxboro-EX) chipset |
| ICH10R | | • Graphics : | Matrox G200eW 16 MB DDR2 |
| • IPMI : | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | | Winbond® WPCM450 BMC | | • Network Controller(s) : | Intel® 82576 Dual-Port Gigabit Ethernet Controllers |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | 1x Realtek RTL8201N PHY (dedicated IPMI) | | • SATA : | Intel ICH10R SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support (Windows) | | RAID 0, 1, 10 support (Linux) | | • Super I/O : | Winbond 83527HB chip |
| Input / Output |
| • LAN : | 3x RJ45 LAN ports |
| • Serial Port / Header : | 1 Fast UART 16550 serial port |
| 1 Fast UART 16550 serial header | | • USB : | 2x USB rear ports |
| 2x USB internal headers (3 ports) | | Total 5 USB 2.0 Compliant | | • VGA : | 1x VGA Port |
| Expansion / Connectivity |
| • Expansion Slots Total (Free) : | Auto-switch for 2 (x16) PCI-E 2.0 |
| 1 (x16) PCI-E 2.0 + 2 (x8) PCI-E 2.0 | | 4 (x8) PCI-E 2.0 slots | | Drive Bays |
| • Hot-swap : | 6x 3.5" Hot-swap SAS/SATA Drives Supported |
| Peripheral Drives |
| • DVD-ROM : | Slim 8x DVD, 24x CD, DVD-ROM (optional) |
| SAS / SATA Backplane |
| • SAS / SATA Backplane : | 1x 2U SAS / SATA backplane w/ SES-II |
| System Cooling |
| • Fans : | 3x 80mm heavy-duty fans with optimal fan speed control, 1x Air shroud |
| System BIOS |
| • BIOS Features : | Plug and Play (PnP) |
| ACPI up to 3.0 | | USB Keyboard support | | PCI 2.2 | | • BIOS Type : | 32Mb SPI Flash EEPROM with AMI® BIOS |
| Power Supply |
| • Certification : | 80 PLUS Gold Certified |
| • Power Supply : | Redundant 1400W high-efficiency power supply with PMBus |
| Operating Environment / Compliance |
| • Operating Temperature : | Non-operating Temperature: -40° to 70° C (-40° to 158° F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) | | Non-operating Relative Humidity: 5 to 95% (non-condensing) | | Operating Temperature: 10° to 35° C (50° to 95°F) | | Parts List - (Items Included) |
| • Backplane : | BPN-SAS-828TQ |
| • Cable(s) : | CBL-0157L-01, CBL-0227L, CBL-0228L, CBL-0230L, CBL-0154L, CBL-0160L, CBL-0222L |
| • CD Driver : | CDR-INTC-Q |
| • Drive Tray(s) : | MCP-220-00001-01, MCP-220-00023-01, MCP-220-82502-0B, MCP-290-00053-0N |
| • Fan(s) : | FAN-0118L4 |
| • Heatsink / Retention : | SNKP0045P |
| • Motherboard / Chassis : | MBD-X8QBE-F / CSE-828TS-R1400LPBP |
| • Peripheral Drives : | MCP-290-00007-01 |
| • Power Distributor : | PDB-PT828-8824(Rev 6.2 or later) |
| • Power Supply : | PWS-1K41F-1R |