| Main Specifications |
| • Dimensions (WxDxH) : | 13" x 8.1 " (33.02cm x 20.57cm) |
| • Form Factor : | Proprietary |
| • Product Type : | Motherboard |
| Processor |
| • Compatible Processor : | Quad-Core Intel Xeon 5400/5300 sequence (Harpertown/Clovertown) up to 3.16 GHz |
| Dual-Core Intel Xeon 5200/5100 sequence (Wolfdale/Woodcrest) up to 3.40 GHz | | • Operating System Software : | Supports 32-bit / 64-bit Operating Systems |
| • Sockets : | Dual 771-pin LGA Sockets |
| • System Bus : | 1333 / 1066 MHz system bus |
| System Memory |
| • DIMM Sizes : | 1GB, 2GB, 4GB, 8GB** |
| • Error Detection : | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | | • Memory Capacity : | Dual channel memory bus |
| Memory must be populated in pairs | | Six 240-pin DIMM sockets | | Supports up to 48GB 667/533MHz DDR2 ECC Register SDRAM | | • Memory Type : | 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.8V only |
| On-Board Devices |
| • Chipset : | Intel® 5100 (San Clemente) chipset |
| Intel® ICH9R | | • Clock Generator : | CK505 chip |
| • Graphics : | ATI ES1000 controller with 32 MB of video memory |
| • IPMI : | (Optional: AOC-SIMSO(+)) |
| 200-pin IPMI slot (SIMSO(+)) | | Support for Intelligent Platform Management Interface v.2.0 / 1.5 | | • Network Controllers : | Intel® 82575EB Dual-port Gigabit Ethernet Controller w/ IOAT |
| Intel® I/OAT support for fast, scaleable, and reliable networking | | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | • SATA : | Intel ICH9R SB SATAII Controller |
| RAID 0, 1, 10 support (Linux) | | RAID 0, 1, 5, 10 support (Windows only) | | • Super I/O : | Winbond 83627HF chip |
| Input / Output |
| • Floppy : | 1 Floppy controller, 1.44 MB, 2.88 MB |
| • IDE : | Single EIDE channel supports up to two UDMA IDE devices |
| Supports UDMA Mode 5, PIO Mode 4, and ATA/100 | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2x RJ45 LAN ports |
| • Serial ATA : | Six SATA hard drives supported |
| Six Serial ATA ports | | • Serial Port / Headers : | 1 Fast UART 16550 serial port |
| • USB : | 2 rear + 1 Type A connector + 2 headers (3 Ports) |
| 6 total USB ports, 2.0 Compliant / 1.1 Compliant | | • VGA : | 1x VGA Port |
| Chassis Optimized for |
| • 1U Chassis : | CSE-812L-520U |
| CSE-815S-560U | | CSE-815TQ-R650U | | • 2U Chassis : | CSE-825MTQ-R700U |
| CSE-825TQ-R700U | | CSE-823MTQ-R700U | | • Important Chassis Notes : | To ensure system stability, a 500W (minimum) ATX power supply[4-pin (+12V), 8-pin (+12V) and 20-pin are required] |
| Expansion / Connectivity |
| • Expansion Slots Total (Free) : | Left Side: 1 (x8) PCI-Express + 1 UIO slots or 1 (x16) PCI-Express |
| Right Side: 1 (x8) PCI-Express | | System BIOS |
| • BIOS Features : | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 1.0/2.0/3.0, USB Keyboard support, Hardware BIOS Virus protection, SMBIOS 2.3 |
| • BIOS Type : | 16Mb SPI Flash with Phoenix ® BIOS |
| Operating Environment |
| • Non-operating Relative Humidity : | 5 to 95% (non-condensing) |
| • Non-operating Temperature : | -40° to 70°C (-40° to 158°F) |
| • Operating Relative Humidity : | 8% to 90% (non-condensing) |
| • Operating Temperature : | 10° to 35°C (50° to 95°F) |
| Operating Environment / Compliance |
| • RoHS : | RoHS Compliant 6/6, Pb Free |
| Parts List |
| • Driver Disk : | CDR-X7 1.23 |
| • I/O Cables : | CBL-0022L |
| CBL-0044L | | CBL-0036L-03 | | • I/O Shield : | CSE-PT07L |
| • Manual : | MNL-0956 |
| • Motherboard : | MBD-X7DCU-O |
| PC Health Monitoring |
| • CPU : | Monitors for CPU Cores,VTT, +1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT |
| CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V | | • FAN : | Pulse Width Modulated (PWM) fan connectors |
| Total of eight 4-pin fans | | 8x fans with tachometer monitoring | | Status monitor for speed control | | Status monitor for on/off control | | Support for 3-pins (w/ speed control) | | Low noise fan speed control | | • LED : | Suspend-state Indicator LED |
| UID | | CPU / System Overheat LED | | • Other Features : | Chassis intrusion detection |
| Chassis intrusion header | | SDDC | | • Temperature : | Monitoring for CPU and chassis environment |
| CPU thermal trip support | | Thermal Control for 8x Fan Connectors | | PSU I2C temperature sensing logic | | Thermal Monitor 2 (TM2) support | | PECI | | Management |
| • Power Configurations : | Main Switch Override Mechansim |
| Power-on mode for AC power recovery | | Internal/External modem remote ring-on | | Wake-On-LAN (WOL) header | | ACPI Power Management | | • Software : | NMI |
| Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 | | Watch Dog | | Super Doctor III |