| Main Specifications |
| • Dimensions (WxDxH) : | 12" x 10" (30.5cm x 25.4cm) |
| • Form Factor : | ATX |
| • Product Type : | Motherboard |
| Processor |
| • Compatible Processor : | Quad-Core Intel Xeon 5400/5300 sequence (Harpertown/Clovertown) up to 3.16 GHz |
| Dual-Core Intel Xeon 5200/5100/5000 sequence (Wolfdale/Woodcrest/Dempsey) up to 3.40 GHz | | • Sockets : | Dual 771-pin LGA Sockets / Supports up to two Intel® 64-bit Xeon® processor(s) |
| • System Bus : | 1333 / 1066 / 667 MHz system bus |
| System Memory |
| • DIMM Sizes : | 256 MB, 512 MB, 1GB, 2GB, 4GB |
| • Error Detection : | Detects double-bit errors (using ECC memory) |
| Corrects single-bit errors | | Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | | • Memory Capacity : | Six 240-pin DIMM sockets |
| Memory must be populated in pairs | | Supports up to 16 GB 667 / 533MHz DDR2 ECC FB-DIMM memory | | Dual branch memory bus | | No Memory Mirroring support | | • Memory Type : | 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.8 V only |
| 1.5V(AMB) | | On-Board Devices |
| • Chipset : | MCH + ESB2 |
| Intel® 5000V (Blackford VS) chipset | | • Clock Generator : | ICS932S401EGLF |
| • Graphics : | XGI Volari™ Z7 PCI-E Graphics Processor |
| • IPMI : | NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot |
| 200-pin IPMI slot | | (Optional: AOC-SIMLC) | | Support for Intelligent Platform Management Interface v.2.0 | | • Network Controllers : | Two Intel® (ESB2/Gilgal) 82563EB Single-Port Gigabit Ethernet Controllers |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | • SATA : | Intel ESB2 SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support | | • Super I/O : | Winbond 83627HF chip |
| Input / Output |
| • Floppy : | 1 Floppy controller, 1.44 MB Support |
| • IDE : | Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Single EIDE channel supports up to two UDMA IDE devices (IDE-M | | IDE-S) | | • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2x RJ45 LAN ports |
| • Parallel Port : | 1 Header for ECP / EEP parallel port |
| • Serial ATA : | Six SATA hard drives supported |
| Six Serial ATA ports | | • Serial Port / Headers : | 1 Fast UART 16550 serial header |
| 1 Fast UART 16550 serial port | | • USB : | Total 6 USB 2.0 Compliant / 1.1 Compliant |
| 2x USB rear ports | | 2x USB internal headers for up to 4-ports | | • VGA : | 1x VGA Port |
| Chassis Optimized for |
| • 1U Chassis : | SC811T-520 |
| SC512F-520 (Mini 1U) | | • 2U Chassis : | SC825TQ-R700LPV |
| SC825TQ-560LP | | SC823T-550LP | | • Important Chassis Notes : | To ensure system stability |
| a 500W (minimum) ATX power supply[8-pin (+12V) and 24-pin are required] | | • Mid-Tower : | SC733i-645 |
| SC733T-645 | | SC733TQ-645 (MCP-310-00010-01 air shroud required) | | • Tower / 4U Rackmount : | SC743T-645 (FAN-0091 required) |
| SC743i-645 (FAN-0091 required) | | SC743TQ-R760 | | SC743T-650 | | Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 1x 32-bit 33MHz PCI (3.3V) slots |
| 1x 64-bit 133MHz PCI-X slot | | • Universal Slot : | 1x (x8) PCI-e slot OR 1x 64-bit 133MHz PCI-X Slot |
| System BIOS |
| • BIOS Features : | DMI 2.3 |
| PCI 2.2 | | BIOS rescue hot keys | | Plug and Play (PnP) | | SMBIOS 2.3 | | USB Keyboard support | | ACPI 1.0 | | Hardware BIOS Virus protection | | • BIOS Type : | 8Mb Flash EEPROM with Phoenix® BIOS |
| Operating Environment |
| • Non-operating Relative Humidity : | 5 to 95% (non-condensing) |
| • Non-operating Temperature : | -40º to 70º C (-40º to 158º F) |
| • Operating Relative Humidity : | 8% to 90% (non-condensing) |
| • Operating Temperature : | 10º to 35º C (50º to 95º F) |
| Operating Environment / Compliance |
| • RoHS : | RoHS Compliant 5/6, Server Exemption |
| PC Health Monitoring |
| • CPU : | Adjustable CPU Clock Frequency Ratio |
| 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V | | Monitors for CPU Cores, +3.3V, +5V, ±12V | | • FAN : | Total of six proprietary 4-pin fan headers supporting up to 6 fans |
| 6x fans with tachometer status monitoring | | Low noise fan speed control | | Pulse Width Modulated (PWM) fan connectors | | 3-pin fan support | | Status monitor for speed control | | Status monitor for on/off control | | • LED : | Supsend-State Indicator LED |
| CPU / System Overheat LED | | +5V Standby Alert LED | | • Other Features : | Chassis intrusion detection |
| SDDC Support | | Chassis intrusion header | | • Temperature : | Thermal Monitor 2 (TM2) support |
| Thermal Control for 6x fan connectors | | Monitoring for CPU and chassis environment | | CPU thermal trip support | | PSU I2C temperature sensing logic | | Management |
| • Power Configurations : | Wake-On-LAN (WOL) header |
| ACPI Power Management | | Main Switch Override Mechanism | | Wake-On-Ring (WOR) header | | Internal / External modem remote ring-on | | Power-on mode for AC power recovery | | • Software : | Super Doctor III |
| Optional IPMI (Intelligent Platform Management Interface) 2.0 | | Watch Dog | | NMI |