| Main Specifications |
| • Dimensions (WxDxH) : | 12" x 10" (30.5cm x 25.4cm) |
| • Form Factor : | ATX |
| • Product Type : | Motherboard |
| Processor/Cache |
| • Compatible Processor : | Intel® Xeon®Processor 5600 Series (Westmere) |
| Intel® Xeon®Processor 5500 Series (Nehalem-EP) | | • QPI : | up to 6.4 GT/s |
| • Sockets : | Dual 1366-pin LGA Sockets / Supports up to two Intel® 64-bit Xeon® processor(s) |
| System Memory |
| • DIMM Sizes : | 1GB, 2GB, 4GB , 8GB** , 16GB** |
| • Error Detection : | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) | | Supports Intel® x4 and x8 Single Device Data Correction (SDDC) | | • Memory Capacity : | 6x 240-pin DIMM sockets |
| Supports up to 96 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory | | Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory | | Memory Mirroring supported | | • Memory Type : | 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| • Memory Voltage : | 1.5 V |
| On-Board Devices |
| • Chipset : | Intel® 5500 (Tylersburg) chipset |
| ICH10R + IOH-24D | | • Graphics : | Matrox G200eW |
| • IPMI : | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | | Winbond® WPCM450 BMC | | • Network Controllers : | 2x Intel® 82574L Gigabit Ethernet Controllers |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output | | 1x Realtek RTL8201N PHY (dedicated IPMI) | | • SATA : | Intel ICH10R SATA 3.0Gbps Controller |
| RAID 0, 1, 5, 10 support (Windows) | | RAID 0, 1, 10 support (Linux) | | • Super I/O : | Winbond® 83627DHG-P chip |
| Input / Output |
| • Keyboard / Mouse : | PS/2 keyboard and mouse ports |
| • LAN : | 2x RJ45 LAN ports |
| 1x RJ45 Dedicated IPMI LAN port | | • Serial ATA : | Six SATA hard drives supported |
| Six Serial ATA ports | | • Serial Port / Headers : | 1 Fast UART 16550 serial port |
| 1 Fast UART 16550 serial header (Option) | | • USB : | 2x USB rear ports |
| 1x USB on-board | | 2x USB internal headers | | Total 5 USB 2.0 Compliant | | • VGA : | 1x VGA Port |
| Chassis Optimized for |
| • 1U Chassis : | CSE-512F-280 |
| CSE-512F-520 | | CSE-512F-520L | | CSE-811i-280 | | CSE-811i-410 | | CSE-813MTQ-280C | | CSE-813MTQ-520C | | CSE-811i-520 | | CSE-811T-410 | | CSE-811TQ-280 | | CSE-811i-420 | | CSE-811TQ-520 | | • 2U Chassis : | CSE-825TQ-560LPV |
| CSE-825TQ-R700LPV | | CSE-826TQ-R800LPV | | CSE-213A-R900LP | | CSE-216A-R900LP | | CSE-216E1-R900LP | | CSE-216E2-R900LP | | CSE-523L-520B | | CSE-822T-400LP | | CSE-823MTQ-R700LP | | CSE-823TQ-650LP | | CSE-825MTQ-R700LPB | | • 3U Chassis : | CSE-833T-550 |
| CSE-833T-650 | | CSE-833T-R760 | | CSE-835TQ-R800B | | CSE-836E1-R800V | | CSE-836E2-R800V | | CSE-836TQ-R800V | | CSE-933E2-R760 | | CSE-933T-R760 | | CSE-936A-R900B | | CSE-933E1-R760 | | • Important Chassis Notes : | To ensure system stability, a 550W (minimum) ATX power supply [Two 8-pin (+12V) and 24-pin are required] |
| • Mid-Tower : | CSE-733i-465B |
| CSE-733i-645 | | CSE-733T-450 | | CSE-733T-465B | | CSE-733T-645 | | CSE-733TQ-465B | | CSE-733TQ-645 | | CSE-733E-465B | | CSE-733i-450 | | • Tower / 4U Rackmount : | CSE-742T-500B |
| CSE-743i-650 | | CSE-743i-R760 | | CSE-743T-645 | | CSE-743T-650 | | CSE-743T-R760 | | CSE-743i-645 | | CSE-846E1-R900B | | CSE-745TQ-800 | | CSE-743i-465B | | CSE-743TQ-865B | | CSE-745TQ-R800 | | CSE-743TQ-865-SQ | | Expansion / Connectivity |
| • Expansion Slots Total (Free) : | 2x 33MHz PCI slots |
| 2 (x8) PCI-E 2.0 (1 in x16 slot) | | 1 (x4) PCI-E 2.0 (in x8 slot) | | 1 (x4) PCI-E (in x8 slot) | | System BIOS |
| • BIOS Features : | Plug and Play (PnP), PCI 2.2, ACPI up to 3.0, USB Keyboard support |
| • BIOS Type : | 32Mb SPI Flash EEPROM with AMI® BIOS |
| Operating Environment / Compliance |
| • Environmental Spec. : | Operating Temperature: 10° to 35° C (50° to 95°F) |
| Non-operating Temperature: -40° to 70° C (-40° to 158° F) | | Operating Relative Humidity: 8% to 90% (non-condensing) | | Non-operating Relative Humidity: 5 to 95% (non-condensing) | | • RoHS : | RoHS Compliant 6/6, Pb Free |
| Parts List |
| • Driver Disk : | CDR-X8 1.01 |
| • I/O Cables : | CBL-0044L |
| • I/O Shield : | MCP-260-00027-0N |
| • Manual : | MNL-1076 |
| • Motherboard : | MBD-X8DTL-iF -O |
| Miscellaneous |
| • Compatibility : | For all supermicro X8 motherboards customer must purchase revision K of the chassis |