Where Antec's other case SmartCools are best used as exhaust fans, the SmartCool Plus can be used as a temperature-controlled intake fan to maximize quietness and maximize cooling, as appropriate. Simply install the fan, attach the thermal detector in the area of concern with the provided thermal tape, and plug in the power. 80mm SmartCool Plus is a thermally controlled case fan with remote temperature sensor. Variable Speed Intake Fan - put SmartCool Plus in your case's front fan mount and put the thermal detector near your AGP card, by your CPU, at the top of the case where heat builds up, or anywhere you are concerned may be overheating. SmartCool Plus will increase or decrease its speed as needed, maximizing both cooling and quiet. Hard Drive Cooling Fan - put SmartCool Plus in your removable hard drive cage fan mount* and attach the thermal detector to your hard drive casing. SmartCool Plus will be quiet when your hard drive is cool, and will give more cooling as your hard drive heats up with use, helping protect against heat-related performance or data loss.
Main Features:
- Built-in temperature sensor
- Variable speed: RPM increases as the temperature rises
- Double ball bearing design for extended life
- Comes with a 4-pin power connector and a separate signal connector to motherboard
| Main Specifications |
| • Dimensions (WxDxH): |
3.1 in x 3.1 in x 1 in |
| • Product Type: |
Fan unit |
| Fan |
| • Air Flow (Total): |
24-41 cfm |
| • Fan Bearing: |
Dual ball bearing |
| • Fan Diameter: |
80 mm |
|
25.4 mm |
|
80 mm |
| • Features: |
Thermal monitoring |
|
Variable fan speed |
|
noise reduction |
| • Power Connector: |
4 pin |
Click for More
 |