With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 feet away from the video source, using readily available Cat5 or Cat6 UTP cable. The kit consists of a Passive wallplate at the video source side, and an Active wallplate at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the video source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected video source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit.
Main Features:
- Break the 5-meter HDMI barrier using Cat5/6 UTP Cable
- 1080p Resolution up to 115 ft.
- 720p Resolution up to 196 ft.
- 480p Resolution up to 230 ft.
- For best performance, use Solid conductor Cat6 cable (Model # N222-01K-BL)
- Termination Tool included for punching down UTP wire
| Main Specifications |
| • Product Type: |
Wall plate |
| Cabling & Wiring |
| • Connector Provided: |
2 x 19 pin HDMI Type A female |
| Miscellaneous |
| • Package Content(s): |
Stripper/punchdown tool |