- Products
- Telco Data Center
- Supermicro AS-F1114S-RNTR A+ 4U Barebone Single AMD EPYC 7003/7002 Series Processor Up to 2TB SDRAM SATA3, NVMe Network via AIOM
Supermicro AS-F1114S-RNTR A+ 4U Barebone Single AMD EPYC 7003/7002 Series Processor Up to 2TB SDRAM SATA3, NVMe Network via AIOM
• Hyperscale / Hyperconverged
• HPC and Big Data
• Data Center Enterprise Applications
• Scale Out Storage
• Telco Data Center
• Virtualization Server
Barebone 4U Rackmount SuperServer Single AMD EPYC 7003/7002, System on Chip, Up to 2TB in 8 DIMM Slots, SATA3, NVMe, 6x 2.5in drive bays, network via AIOM, 2200W Redundant Power Supply (CSE-F418BC3-R2K20B + H12SSFR-AN6) - AS -F1114S-RNTR
To maintain quality and integrity, this product is sold only as a completely assembled system (for optimal performance 8 DIMMs is recommended). Minimum requirement is 1 CPU, 4 DIMMs, 1 HDD/NVMe and 1 AIOM/AOC NIC card per node.
1. Single AMD EPYC™ 7003/7002 Series Processor (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer)
2. Up to 2TB ECC 3DS LRDIMM, up to DDR4-3200MHz; 8 DIMM slots
3. Expansion slots: 1 PCI-E 4.0 x16 (LP Riser), 1 PCI-E 4.0 x16 (for AIOM)
4. AIOM Network card, 1 dedicated IPMI LAN port
5. 1 VGA, 2 USB 3.0 ports
6. 6 Hot-swap 2.5" drive bays: 2 NVMe/SATA3, 4 SATA3 (optional NVMe with additional cables) M.2 Interface : 4 SATA/PCI-E 4.0 x4 M.2 Form Factor : 2242, 2260, 2280, 22110 M.2 Key : M-Key
7. 3x 4cm 17.6K RPM middle fans
8. 2200W Redundant Power Supplies Titanium Level (96%) (Full redundancy based on configuration and application load)
Extra Specifications for Supermicro AS-F1114S-RNTR A+ 4U Barebone Single AMD EPYC 7003/7002 Series Processor Up to 2TB SDRAM SATA3, NVMe Network via AIOM
| Motherboard | ||
| Motherboard | Super H12SSFR-AN6 | |
| Processor/Chipset (per Node) | ||
| CPU | Socket SP3 | |
| Supports CPU TDP / cTDP up to 280W * | ||
| Single AMD EPYC™ 7003/7002 Series Processor (The latest AMD EPYC™ 7003 Series Processor with AMD 3D V-Cache™ Technology requires BIOS version 2.3 or newer) | ||
| Cores | Up to 64 Cores | |
| Note | * Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization | |
| System Memory (per Node) | ||
| Memory Capacity | 8 DIMM slots | |
| 8-channel memory bus | ||
| Supports up to 2TB Registered ECC DDR4 3200MHz SDRAM in 8 DIMMs | ||
| Memory Type | DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs | |
| Memory Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB | |
| Memory Voltage | 1.2V | |
| Error Detection | Corrects single-bit errors | |
| Detects double-bit errors (using ECC memory) | ||
| On-Board Devices | ||
| Chipset | System on Chip | |
| SATA | SATA3 (6Gbps) | |
| Network Controllers | Flexible networking via AIOM (not included, must add 1 per node) | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| Graphics | ASPEED AST2600 BMC | |
| Input / Output (per node) | ||
| LAN | 1 RJ45 Dedicated IPMI LAN port | |
| Flexible networking via AIOM | ||
| USB | 2 USB 3.0 ports (rear) | |
| VGA | 1 VGA port | |
| Others | 1 COM port | |
| 1 TPM 2.0 header | ||
| System BIOS | ||
| BIOS Type | 256Mb SPI Flash EEPROM with AMI BIOS | |
| Management | ||
| Software | Watch Dog | |
| KVM with dedicated LAN | ||
| SuperDoctor® 5 | ||
| IPMI 2.0 | ||
| SSM , SUM | ||
| Power Configurations | ACPI Power Management | |
| PC Health Monitoring | ||
| CPU | Monitors for CPU Cores | |
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| Fans with tachometer monitoring | ||
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | ||
| Chassis | ||
| Form Factor | 4U Rackmount | |
| Model | CSE-F418BC3-R2K20B | |
| Dimensions and Weight | ||
| Width | 17.63" (448mm) | |
| Height | 6.96" (177mm) | |
| Depth | 29" (737mm) | |
| Package | 28.3" (W) x 15.0" (H) x 42.4" (D) | |
| Weight | Net Weight: 150 lbs (68.04 kg) | |
| Gross Weight: 200 lbs (90.71 kg) | ||
| Available Colors | Black | |
| Front Panel (per node) | ||
| Buttons | Power On/Off button | |
| UID button | ||
| LEDs | Power status LED | |
| Hard drive activity LED | ||
| Network activity LEDs | ||
| Information LED (UID, Fan failure, Overheat) | ||
| Expansion Slots (per node) | ||
| PCI-Express | 1 PCI-E 4.0 x16 (Low-profile riser) | |
| 1 PCI-E 4.0 x8 (Internal RAID AOC) | ||
| Drive Bays (per node) | ||
| Hot-swap | 2 Hot-swap 2.5" NVMe/SATA3 and 4 SATA3 (optional NVMe with additional cables) | |
| M.2 | M.2 Key: M-Key | |
| M.2 Interface: 4 SATA/PCI-E 4.0 x4 | ||
| M.2 Form Factor: 2242, 2260, 2280, 22110 | ||
| Backplane | ||
| Backplane | 1 SATA/NVMe backplane | |
| System Cooling (per node) | ||
| Fans | 3x 4cm 17.6K RPM middle fans | |
| Power Supply | ||
| Power Supply | 2200W Redundant Power Supplies with PMBus | |
| Total Output Power and Input | 1200W with Input 100-127Vac | |
| 1800W with Input 200-220Vac | ||
| 1980W with Input 220-230Vac | ||
| 2090W with Input 230-240Vac | ||
| 2200W with Input 220-240Vac (for UL/cUL use only) | ||
| 2090W with Input 230-240Vdc (for CCC only) | ||
| AC Input Frequency | 50-60Hz | |
| Dimension (W x H x L) | 76 x 40 x 336 mm | |
| +12V | Max: 150A / Min: 0A (200-220Vac) | |
| Max: 165A / Min: 0A (220-230Vac) | ||
| Max: 100A / Min: 0A (100-127Vac) | ||
| Max: 174.17A / Min: 0A (230-240Vac) | ||
| Max: 183.3A / Min: 0A (220-240Vac) | ||
| 5VSB | Max: 1A / Min: 0A | |
| Output Type | Backplanes (gold finger) | |
| Certification | Titanium Level | |
| Operating Environment | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
| Operating Relative Humidity: 8% to 90% (non-condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
| Product SKUs | ||
| Product SKUs | A+ Server F1114S-RNTR (Black) | |
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-H12SSFR-AN6 | 8 | Super H12SSFR-AN6 Motherboard | |
| Motherboard / Chassis | CSE-F418BC3-R2K20B | 1 | 4U Chassis | |
| Backplane | BPN-ADP-X11DPFR | 8 | Power distribution board | |
| Backplane | BPN-NVME4-F418-B6S6 | 8 | 1U 6-Slot SFF Backplane Supports 6xSAS3/SATA3/NVMe4 Storage Devices,HF,RoHS | |
| Cable 1 | CBL-0486L | 16 | 2x2 to 2x2 15cm Power Cable HF | |
| Cable 2 | CBL-OTHR-1211-28 | 8 | 2x10pin (PH 1) to 2x10pin (PH 1),11CM,28AWG,1A/pin,RoHS | |
| Cable 3 | CBL-PWCD-0900 | 4 | PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17 | |
| Cable 4 | CBL-SAST-1223-85 | 8 | Slimline x8 (LE) to 2x Slimline x4 (STR),22/22CM,85 OHM | |
| Cable 5 | CBL-SAST-1247-100 | 16 | Slimline x4 (LE) to MiniSAS HD x4 (STR),47CM,100 OHm,Ro | |
| Heatsink / Retention | SNK-P0062P | 8 | 1U Passive CPU Heat Sink for AMD Socket SP3 Processors | |
| Riser Card | RSC-S-6G4 | 8 | 1U LHS Standard riser card with one PCI-E 4.0 x16 slot,HF,Ro | |
| Power Supply | PWS-2K20A-1R | 4 | 1U 2200W Redundant, Titanium, 76(W) X 40(H) X 336(L) mm | |
| Backplane | BPN-PDB-X12DPFR | 2 | FatTwin 4U 4-Node PDB with LCMC for RIO Platform | |
| Rail Set | MCP-290-41803-0N | 1 | Fat twin F418 / F424 Static Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF | |
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) |
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| Cable(s) for Additional NVMe Support | CBL-SAST-1223-85 | $ 33.50 | 2 | Slimline x8 (LE) to 2x Slimline x4 (STR),22/22CM,85 OHM | ||
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |
