QLogic QLE3442-RJ-CK 2-P PCI-E 3.0 10GBase-T Ethernet Adapter
• MSI and MSI-X support
• Broad OS and hypervisor support
• Comprehensive stateless offloads
• Dual Port - RJ45 connectors (10GBASE-T)
2-Port PCI-E 3.0 x8 10GBase-T Ethernet Adapter - Intended for use with twisted pair copper cabling up to 100m CAT 7 (shielded) and CAT 6A (shielded/unshielded), (cables not included) - 3400 Intelligent Ethernet Adapter Series
• Delivers full line-rate 10GbE performance across both ports
• Boosts host CPU efficiency with hardware offloads for NVGRE and VXLAN tunnels
• Improves reliability and interoperability—leverages QLogic’s market-proven Ethernet architecture and software
• Enables provisioning of 10GbE ports for greater deployment flexibility through switch-independent NIC partitioning
• 10GBASE-T version provides a low-cost and easy-to-install RJ45 network connectivity solution that is backward compatible with existing 1GbE
Extra Specifications for QLogic QLE3442-RJ-CK 2-P PCI-E 3.0 10GBase-T Ethernet Adapter
| Main Specifications | ||
| Device Type | Network adapter | |
| Dimensions (WxDxH) | 6.6 in x 2.7 in | |
| Form Factor | Plug-in card - low profile | |
| Interface (Bus) Type | PCI Express 3.0 x8 | |
| PCI Specification Revision | PCIe 3.0 | |
| Networking | ||
| Compliant Standards | IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.3ae, IEEE 802.3an, IEEE 802.1Qbb, IEEE 802.1Qaz | |
| Connectivity Technology | Wired | |
| Data Link Protocol | 10 GigE | |
| Data Transfer Rate | 10 Gbps | |
| Features | Flow control, ACPI support, VLAN support, IPv6 support, Data Center Bridging Exchange (DCBX) support, priority-based flow control, Jumbo Frames support, IPv4 support, Large Send Offload (LSO), Giant Send Offload (GSO), Large Receive Offload (LRO), Receive Side Scaling (RSS), Single Root I/O Virtualization (SR-IOV), Link Aggregation Control Protocol (LACP), TCP Segmentation Offload (TSO), PXE 2.0 support, checksum offload support, Transmit Side Scaling (TSS) | |
| Network / Transport Protocol | TCP/IP, UDP/IP | |
| Port Quantity | 10GBase-T x 2 | |
| Power | ||
| Comsumtion Operational | 15.5 Watt | |
| Environmental Parameters | ||
| Humidity Range Operating | 10 - 90% (non-condensing) | |
| Max Operating Temperature | 131 °F | |
| Min Operating Temperature | 32 °F | |
| Expansion / Connectivity | ||
| Interfaces | 2 x 10GBase-T - RJ-45 | |
| Miscellaneous | ||
| Cables Required | Ethernet 10GBase-T | |
| Compliant Standards | CISPR 22 Class A, FCC CFR47 Part 15 B, AS/NZS, EN 61000-3-3:2008, VCCI Class A, EN 61000-3-2:2006+A2:2009, KN22, KN24, EN55022:2010, EN55024:2010, ICES-003:2012 Class A | |
| Included Accessories | Low-profile bracket | |
| Warranty: | 3 years |
| Provider: | Manufacturer |
| Phone No.: | 952-932-4040 |
| E-mail: | support@qlogic.com |
| URL: | Click here for Manufacturer Website |
| Coverage: | Replacement or Repair |
| Average Service Time: | 1-2 weeks |
| If you need Technical Support for this item please contact: | |
| Provider: | QLogic Corporation |
| Type of Support: | FULL |
| Phone No: | 952-932-4040 |
| URL: | Click here for Manufacturer Website |
