Motherboard (Four per System) |
Motherboard (Four per System) | Super X10DRT-HIBF |
Processor/Cache |
CPU | Dual Socket R3 (LGA 2011) |
| Intel® Xeon® processor E5-2600 v4 † / v3 family (up to 145W TDP) * |
Cores / Cache | Up to 22 Cores † / Up to 55MB † Cache |
System Bus | QPI up to 9.6 GT/s |
Note | † BIOS version 2.0 or above is required |
| * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory |
Memory Capacity | 8x 288-pin DDR4 DIMM slots |
| Up to 1TB † ECC 3DS LRDIMM, 256GB ECC RDIMM |
Memory Type | 2400 † /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | LRDIMM: 64GB, 32GB |
| 3DS LRDIMM: 128GB |
| RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices (per Node) |
Chipset | Intel® C612 chipset |
Infiniband | Mellanox ConnectX-3 FDR Infiniband 56Gbps Controller |
SAS | SAS2 (6Gbps) via Broadcom 2208 w/ Hardware RAID support |
| RAID 0, 1, 5, 6, 10, 50 support |
SATA | SATA3 (6Gbps) with RAID 0, 1 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| ASPEED AST2400 BMC |
Network Controllers | Intel® i350 Dual Port Gigabit Ethernet |
| Virtual Machine Device Queues reduce I/O overhead |
| Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| 1x Realtek RTL8201N PHY (dedicated IPMI) |
Video | ASPEED AST2400 BMC |
Input / Output (per Node) |
Infiniband | 1x external QSFP Infiniband connector |
Serial ATA | 8x SATA3 (6Gbps) ports |
SAS | 6x SAS2 ports (6Gbps) |
LAN | 2x RJ45 Gigabit Ethernet LAN ports |
| 1x RJ45 Dedicated IPMI LAN port |
USB | 2x USB 3.0 ports (rear) |
Video | 1x VGA port |
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-217HQ-R1K68B |
Dimensions and Weight |
Width | 17.25" (438mm) |
Height | 3.47" (88mm) |
Depth | 26.75" (679mm) |
Package | 26.4" (H) x 11.2" (W) x 39.8" (D) |
Weight | Gross Weight: 85 lbs (38.6kg) |
| Net Weight: 54.5 lbs (24.7 kg) |
Available Colors | Black |
Front Panel |
Buttons | Power On/Off button |
| System Reset button |
| UID button |
LEDs | Power status LED |
| HDD activity LED |
| Universal Information (UID) LED |
| 2x Network activity LEDs |
Expansion Slots (per Node) |
PCI-Express | 1x PCI-E 3.0 (x16) Low-profile slot |
Drive Bays (per Node) |
Hot-swap | 6x 2.5" Hot-swap SAS2/SATA3 drive bays Please contact Supermicro Technical Support for additional information about HDD and SSD if mixed. Some restrictions and configuration rules that apply to SSD are different from HDD. |
System Cooling |
Fans | 4x 8cm heavy duty fans with PWM fan speed control |
Power Supply (76mm Width) |
Power Supply (76mm Width) | 1600W 1U Redundant Power Supplies with PMBus |
Total Output Power | 800W: 100 – 140Vac |
| 1600W: 180 – 240Vac |
Dimension (W x H x L) | 76 x 40.4 x 336 mm |
Input | 100-140Vac / 10-7A / 50-60Hz |
| 180-240Vac / 11-8A / 50-60Hz |
+12V | Max: 67A / Min: 0A (100-140Vac) |
| Max: 133A / Min: 0A (180-240Vac) |
+5Vsb | Max: 1A / Min: 0A |
Output Type | 27 Pairs Gold Finger Connector |
Certification | Titanium Level |
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | USB Keyboard support |
| Plug and Play (PnP) |
| PCI 2.2 |
| SMBIOS 2.3 |
| ACPI 1.0 / 2.0 |
| UEFI |
| APM 1.2 |
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Product SKUs |
Product SKUs | SuperServer 2028TR-H72FR (Black) |