| Product SKUs |
| SYS-2028U-TNRT+ | SuperServer 2028U-TNRT+ ( Black ) |
| Motherboard |
| Motherboard | Super X10DRU-i+ |
| Processor/Cache |
| CPU | Dual Socket R3 (LGA 2011) |
| Intel® Xeon® processor E5-2600 v4 † / v3 family (up to 160W TDP) * |
| Cores / Cache | Up to 22 Cores † / Up to 55MB † Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required |
| * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| System Memory |
| Memory Capacity | 24x 288-pin DDR4 DIMM slots |
| Up to 3TB † ECC 3DS LRDIMM, 768GB ECC RDIMM |
| Memory Type | 2400 † /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| 2666/2400 ECC DDR4 NVDIMM |
| DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB |
| NVDIMM: 16GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices |
| Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| ASPEED AST2400 BMC |
| Network Connectivity | 1x Realtek RTL8211E PHY (dedicated IPMI) |
| Intel® X540 10GBase-T |
| 2x 10GBase-T ports via AOC-2UR8N4-i2XT |
| Graphics | ASPEED AST2400 BMC |
| Input / Output |
| SATA | 8x SATA3 (6Gbps) ports |
| SAS | 24x SAS3 ports support via optional Add-on Cards |
| NVMe | 4x NVMe ports |
| LAN | 1x RJ45 Dedicated IPMI LAN port |
| 2x 10GBase-T LAN ports |
| USB | 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A) |
| Video | 1x VGA Connector |
| Serial Port / Header | 1x Serial header |
| DOM | 2x Super DOM (Disk on Module) ports |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | SMBIOS 2.7.1 |
| USB Keyboard support |
| Plug and Play (PnP) |
| UEFI 2.3.1 |
| PCI 2.3 |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 |
| APM 1.2 |
| Management |
| Software | Watch Dog |
| NMI |
| SuperDoctor® 5 |
| Intel® Node Manager 3.0 |
| SUM and SSM |
| Optional IPMI 1.5 / 2.0 |
| Power Configurations | Power-on mode for AC power recovery |
| ACPI Power Management |
| Chassis |
| Form Factor | 2U Rackmount |
| Model | CSE-219UAC-R1K02 |
| Dimensions and Weight |
| Width | 17.2" (437mm) |
| Height | 3.5" (89mm) |
| Depth | 27.76" (705.3mm) |
| Weight | Net Weight: 36 lbs (16.4 kg) |
| Gross Weight: 72 lbs (32.7 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button |
| System Reset button |
| LEDs | Power status LED |
| HDD activity LED |
| 2x Network activity LEDs |
| System information (overheat/UID) LED |
| Expansion Slots |
| PCI-Express | 7x PCI-E 3.0 x8 slots (5x FH, 10.5" L, 1x LP, 1x Internal LP) |
| Drive Bays |
| Hot-swap | 24x 2.5" Hot-swap drive bays |
| Default 8x SATA3 ports and 4x NVMe ports |
| Optional 24x SAS3 ports via AOC |
| System Cooling |
| Fans | 4x 8cm heavy duty PWM fans |
| Power Supply |
| Power Supply | 1000W Redundant Power Supplies with PMBus |
| Total Output Power | 800W: 100 – 127Vac |
| 1000W: 200 – 240Vac |
| 1000W: 200 – 240Vdc (for CCC only) |
| Dimension (W x H x L) | 73.5 x 40 x 203 mm |
| Input | 100-127Vac / 9.8 - 7A / 50-60Hz |
| 200-240Vac / 7 - 5A / 50-60Hz |
| 200-240Vdc / 7 - 5A (for CCC only) |
| +12V | Max: 66.7A / Min: 0A (100-127Vac) |
| Max: 83A / Min: 0A (200-240Vac) |
| Max: 83A / Min: 0A (200-240Vdc) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level |
| PC Health Monitoring |
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. |
| 5+1 Phase-switching voltage regulator |
| FAN | Status monitor for speed control |
| Pulse Width Modulated (PWM) fan connectors |
| 8x 4-pin fan headers |
| Temperature | Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| Thermal Monitor 2 (TM2) support |
| PECI |
| Thermal Control for 8x Fan Connectors |
| Support to monitor Supermicro AOC temperatures from IPMI or SD 5 |
| LED | UID/Remote UID |
| CPU / System Overheat LED |
| Suspend static indicator LED |
| Memory DIMM ECC error LEDs |
| Other Features | Chassis intrusion detection |
| Chassis intrusion header |
| SDDC Support |
| RoHS |
| 4x 8-pin GPU power connectors |
| Operating Environment / Compliance |
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |
