- Products
- Rackmount & Tower
- Supermicro SYS-1028U-TNRTP+ 1U Barebone Dual Intel Processor
Supermicro SYS-1028U-TNRTP+ 1U Barebone Dual Intel Processor
Server Rackmount 1U for Dual Intel Xeon processor E5-2600 v4/v3 family, QPI up to 9.6 GT/s - Supports up to 3TB DDR4 ECC LRDIMM up to 2400MHz in 24x DIMM slots - On-Board : SATA3 6Gbps (RAID 0, 1, 5, 10), IPMI 2.0, 2x 10GBase-T LAN ports, 2x NVMe ports, VGA - Includes : 10x 2.5in Hot-swap drive bays (Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports, Optional 8x SAS3 ports via AOC), 2x Riser Cards, 1x ADD-On Card AOC-URN2-i2XS, 2x Heatsinks, 750W Redundant 80 Plus Platinum Power Supply, MBD-X10DRU-i+ Motherboard, SC119UAC2-R750 1U Chassis (Black)
To maintain quality and integrity, this product is sold only as a completely-assembled system (with minimum 2 CPUs and 4 DIMMs).
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4 † /v3 family; QPI up to 9.6GT/s
2. Up to 3TB † ECC 3DS LRDIMM, up to DDR4- 2400 † MHz; 24x DIMM slots
3. 2x PCI-E 3.0 x16 slots (FH, 10.5" L), 2x PCI-E 3.0 x8 slots (LP, 1 internal)
4. 2x 10G SFP+ ports
5. 10x Hot-swap 2.5" Drive Bays: Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports; Optional 8x SAS3 ports via AOC
6. 5x heavy duty fans w/ optimal fan speed control
7. 750W Redundant Power Supplies Platinum Level (94%+)
Extra Specifications for Supermicro SYS-1028U-TNRTP+ 1U Barebone Dual Intel Processor
| Motherboard | ||
| Motherboard | Super X10DRU-i+ | |
| Processor/Cache | ||
| CPU | Dual Socket R3 (LGA 2011) | |
| Intel® Xeon® processor E5-2600 v4 † / v3 family (up to 160W TDP) * | ||
| Cores / Cache | Up to 22 Cores † / Up to 55MB † Cache | |
| System Bus | QPI up to 9.6 GT/s | |
| Note | † BIOS version 2.0 or above is required | |
| * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. | ||
| System Memory | ||
| Memory Capacity | 24x 288-pin DDR4 DIMM slots | |
| Up to 3TB † ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM | ||
| Memory Type | 2400 † /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit | |
| 2666/2400 ECC DDR4 NVDIMM | ||
| DIMM Sizes | LRDIMM: 64GB, 32GB | |
| 3DS LRDIMM: 128GB | ||
| RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB | ||
| NVDIMM: 16GB | ||
| Memory Voltage | 1.2 V | |
| Error Detection | Corrects single-bit errors | |
| On-Board Devices | ||
| Chipset | Intel® C612 chipset | |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| ASPEED AST2400 BMC | ||
| Network Connectivity | 1x Realtek RTL8211E PHY (dedicated IPMI) | |
| 2x 10G SFP+ ports via AOC-URN2-I2XS | ||
| Intel® 82599ES 10G SFP+ | ||
| Graphics | ASPEED AST2400 BMC | |
| Input / Output | ||
| SATA | 10x SATA3 (6Gbps) ports | |
| SAS | 8x SAS3 ports support via optional Add-on Card | |
| NVMe | 2x NVMe ports | |
| LAN | 1x RJ45 Dedicated IPMI LAN port | |
| 2x 10G SFP+ ports | ||
| USB | 5x USB 3.0 ports (2 rear, 2 front panel, 1 Type A) | |
| Video | 1x VGA Connector | |
| Serial Port | 1x Serial header | |
| System BIOS | ||
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | |
| BIOS Features | SMBIOS 2.7.1 | |
| USB Keyboard support | ||
| Plug and Play (PnP) | ||
| UEFI 2.3.1 | ||
| PCI 2.3 | ||
| ACPI 1.0 / 2.0 / 3.0 / 4.0 | ||
| APM 1.2 | ||
| Management | ||
| Software | Watch Dog | |
| NMI | ||
| SuperDoctor® 5 | ||
| Intel® Node Manager 3.0 | ||
| SUM and SSM | ||
| Optional IPMI 1.5 / 2.0 | ||
| Power Configurations | Power-on mode for AC power recovery | |
| ACPI Power Management | ||
| Chassis | ||
| Form Factor | 1U Rackmount | |
| Model | CSE-119UAC2-R751-T | |
| Dimensions and Weight | ||
| Height | 1.7" (43mm) | |
| Width | 17.2" (437mm) | |
| Depth | 28.5" (724mm) | |
| Weight | Net Weight: 26 lbs (11.8 kg) | |
| Gross Weight: 41 lbs (18.6 kg) | ||
| Available Color | Black | |
| Front Panel | ||
| Buttons | Power On/Off button | |
| System Reset button | ||
| LEDs | Power LED | |
| Hard drive activity LED | ||
| System Overheat LED / Fan fail LED / UID LED | ||
| 2x Network activity LEDs | ||
| Expansion Slots | ||
| PCI-Express | 2x PCI-E 3.0 x16 slots (Full-height, 10.5" L) | |
| 2x PCI-E 3.0 x8 slots (Low-profile, 1 internal) | ||
| Drive Bays | ||
| Hot-swap | 10x 2.5" Hot-swap drive bays | |
| Default 8x SATA3 ports and 2x NVMe/SATA3 hybrid ports | ||
| Optional 8x SAS3 ports via AOC | ||
| System Cooling | ||
| Fans | 5x heavy duty fans with optimal fan speed control | |
| 3x additional fans optional | ||
| Air Shroud | 1x Air Shroud | |
| Power Supply | ||
| Power Supply | 750W Redundant AC-DC Power Supplies, +12V/+12Vsb output | |
| AC Input | 100-127Vac, 50-60Hz | |
| 200-240Vac, 50-60Hz | ||
| +12V | Max: 62.5A & Min: 0A (100Vac-127Vac) | |
| Max: 62.5A & Min: 0A (200Vac-240Vac) | ||
| 12V SB | Max: 2.1A | |
| Min: 0A | ||
| Certification | Platinum Level | |
| PC Health Monitoring | ||
| Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. | |
| 5+1 Phase-switching voltage regulator | ||
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| 8x 4-pin fan headers | ||
| Temperature | Monitoring for CPU and chassis environment | |
| CPU thermal trip support | ||
| Thermal Monitor 2 (TM2) support | ||
| PECI | ||
| Thermal Control for 8x Fan Connectors | ||
| Support to monitor Supermicro AOC temperatures from IPMI or SD 5 | ||
| LED | UID/Remote UID | |
| CPU / System Overheat LED | ||
| Suspend static indicator LED | ||
| Memory DIMM ECC error LEDs | ||
| Other Features | Chassis intrusion detection | |
| Chassis intrusion header | ||
| SDDC Support | ||
| RoHS | ||
| 4x 8-pin GPU power connectors | ||
| Operating Environment / Compliance | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) | |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
| Operating Relative Humidity: 8% to 90% (non-condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
| Product SKUs | ||
| Product SKUs | SuperServer 1028U-TNRTP+ (Black) | |
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-X10DRU-i+ | 1 | Super X10DRU-i+ Motherboard | |
| Motherboard / Chassis | CSE-119UAC2-R751-T | 1 | CSE-119UAC2-R751-T Chassis | |
| Air Shroud | MCP-310-81903-0B | 1 | Mylar air shroud set for SC819U,119U (X10DRU+),HF | |
| Add-on Card / Module | AOC-URN2-I2XS | 1 | 1U Ultra Riser based on Intel 82599ES controller with 2 10Gb SFP+ ports, 2 NVMe ports, and 1 internal PCI-E x8 3.0 slot | |
| Backplane | BPN-SAS3-116A-N2 | 1 | 10-port 1U SAS3 12Gbps Hybrid backplane, support up to 8x 2.5-inch SAS3/SATA3 HDD/SSD and 2x SAS3/SATA3/NVMe Storage Devices | |
| Cable 1 | CBL-SAST-0655 | 1 | MINI SAS HD(ST)-MINI SAS(RA-RS EXIT),6G,INT,47CM,SB,30AWG | |
| Cable 2 | CBL-SAST-0658 | 2 | MINI SAS HD,INT,PCIe NVMe SSD, 60CM,30AWG | |
| Cable 3 | CBL-PWEX-0653 | 1 | 8 pin female to 4 pin female power, 37cm, 18AWG,RoHS/REACH | |
| Cable 4 | CBL-0484L | 2 | SATA,INT,ROUND,ST-ST,55CM,30AWG | |
| Cable 5 | CBL-CDAT-0662 | 1 | CBL,SGPIO,2X4F TO 2X4F,P2.54,ROUND CABLE,61.5CM,28AWG | |
| Cable 6 | CBL-PWEX-0650 | 1 | 8 pin female to 2x RA(Right Angle) big 4 pin female power, 47/62CM, 18AWG,RoHS/REACH | |
| Cable 7 | CBL-SAST-0656 | 1 | MINI SAS HD(ST)-MINI SAS(RA-RS EXIT),6G,INT,39CM,SB,30AWG | |
| Drive Tray(s) | MCP-220-00127-0B | 2 | Black gen-3 2.5 NVMe drive tray, Orange tab with lock (for hotswap NVMe drive),HF,RoHS/REACH | |
| Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS | |
| Manual | MNL-1678-QRG | 1 | SYS-1028U-TR(4/4T/T/TP)+, QRG,HF,RoHS/REACH | |
| Parts | MCP-150-00009-0B | 1 | Internal AOC rubber support for SC819U, 119U | |
| Riser Card | RSC-R1UW-2E16 | 1 | 1U LHS WIO Riser card with two PCI-E x16 slots | |
| Riser Card | RSC-R1UW-E8R | 1 | 1U RHS WIO Riser card with one PCI-E x8 slot | |
| Rear Window | MCP-240-81910-0N | 1 | Rear window for SC819U, 119U tool-less chassis (i2XS) | |
| Heatsink / Retention | SNK-P0047PS | 2 | 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB | |
| Power Supply | PWS-751P-1R | 2 | 1U 750W Redundant Platinum Single Output Power Supply w/Pmbus W73.5xH40xL203mm,RoHS/REACH | |
| Mounting Rails | MCP-290-00102-0N | 1 | Outer rail, quick-release type, 25.6" to 33.05" | |
| Mounting Rails | MCP-290-00120-0N | 1 | Inner rail, front, quick-release type (thumb screw applied) | |
| Mounting Rails | MCP-290-00112-0N | 1 | Inner rail, extension, long (quick) for 1U 17.2"W chassis | |
| Fan | FAN-0101L4 | 5 | 40x40x56 mm, 14.4K-10.7K RPM Counter-rotating Cooling Fan |
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| Mounting Rails | MCP-290-00062-0N | $ 79.50 | 0 | Inner/outer rail set, quick-release type, 25.6" to 33.05" | ||
| Mounting Rails | MCP-290-00064-0N | $ 16.50 | 0 | Thumb screw adapter of inner rail for 1U 17.2" | ||
| Mounting Rails | MCP-290-00052-0N-BULK | $ 316.50 | 0 | Bulk outer rail, quick-release type, 25.6" to 33.05" (10 sets/pack) | ||
| 10GbE SFP+ Direct Attach Cable (DAC, copper wire) | CBL-0347L | $ 46.00 | 0 | 1M 10G SFP+ to SFP+ Passive Copper M-M Pull type 30AWG | ||
| 10GbE SFP+ Direct Attach Cable (DAC, copper wire) | CBL-0348L | $ 49.50 | 0 | 3M 10G SFP+ to SFP+ Passive Copper M-M Pull type 24AWG | ||
| 10GbE SFP+ Direct Attach Cable (DAC, copper wire) | CBL-0349L | $ 69.50 | 0 | 5M 10G SFP+ to SFP+ Passive Copper M-M Pull type 24AWG | ||
| 10GbE SFP+ Direct Attach Cable (DAC, copper wire) | CBL-NTWK-0347 | $ 47.00 | 0 | 1M 10G SFP+ to SFP+ Passive Copper M-M Push type 30AWG | ||
| 10GbE SFP+ Direct Attach Cable (DAC, copper wire) | CBL-NTWK-0456 | $ 61.50 | 0 | 2M 10G SFP+ to SFP+ Passive Copper M-M Push type 30AWG | ||
| Storage Control Card and Cable(s) | AOC-S3008L-L8e &2x CBL-SAST-0593 | 0 | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA; Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |||
| Storage Control Card and Cable(s) | AOC-S3008L-L8i &2x CBL-SAST-0593 | 0 | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E; Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |||
| Storage Control Card and Cable(s) | AOC-S3108L-H8iR &2x CBL-SAST-0593 | 0 | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60; Internal Mini-SAS HD to Mini-SAS HD 60cm,30AWG,12Gb/s | |||
| Compatible Networking Cables and Transceivers for System default Networking (AOC-URN2-i2XS) | - | 1~2 | Networking Cables and Transceivers Compatibility Matrix | |||
| Network Card(s) | AOC-SGP-i2/4 | 0 | Standard LP, 2/4x GbE RJ45, PCI-E x4, Intel i350 | |||
| Network Card(s) | AOC-STGN-i1S/i2S | 0 | Standard LP, 1/2x 10GbE SFP+, PCI-E x8, Intel 82599EN | |||
| Network Card(s) | AOC-STG-b4S | 0 | Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S | |||
| Network Card(s) | AOC-STG-i2T | $ 312.50 | 0 | Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540 | ||
| Network Card(s) | AOC-STG-i2 | 0 | Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB | |||
| Network Card(s) | AOC-S40G-i2Q | $ 385.00 | 0 | Standard LP 2-port 40GbE controller, based on Intel Fortville XL710 | ||
| Network Card(s) | More | 0 | AOC Compatibility Matrix | |||
| CacheVault(s) | BTR-CV3108-1U1 | $ 322.00 | 0 | CacheVault for Broadcom 3108 with Supercap mounting in 1U 40x56 fan tray | ||
| CacheVault(s) | BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 | 0 | CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location | |||
| Fan | FAN-0101L4 | $ 25.50 | Up to 3 | 40x40x56 mm, 14.4K-10.7K RPM Counter-rotating Cooling Fan | ||
| 1U Cable Management Arm | MCP-290-00152-0N | $ 147.00 | 1 | 1U Supermicro Cable Management Arm 2nd Gen | ||
| Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
| Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |