Motherboard |
Motherboard | Super X10SRA |
Processor |
CPU | Single Socket R3 (LGA 2011) |
| Intel® Xeon® processor E5-2600 v4 † / v3, E5-1600 v4 † / v3 family or Intel® Core™ i7 series (up to 160W TDP **) |
Core / Cache | Up to 22 Cores † / Up to 55MB † Cache |
Note | † BIOS version 2.0 or above is required |
| ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
System Memory |
Memory Capacity | 8x 288-pin DDR4 DIMM slots |
| Up to 1TB ECC 3DS LRDIMM |
| Up to 512GB ECC LRDIMM |
| Up to 256GB ECC RDIMM |
| Up to 128GB DDR4 ECC/non-ECC UDIMM (available with Core i7 only) |
Memory Type | 2400 † / 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes | LRDIMM: 64GB, 32GB |
| 3DS LRDIMM: 128GB |
| RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
On-Board Devices |
Chipset | Intel® C612 chipset |
SATA | RAID 0, 1, 5, 10 support |
| SATA3 (6Gbps) via C612 controller |
Network Controllers | Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Intel® i210-AT Dual Port Gigabit Ethernet |
Audio | RealTek ALC1150 High Definition Audio |
Input / Output |
SATA | 10x SATA3 (6Gbps) ports via PCH |
LAN | 2x RJ45 Gigabit Ethernet LAN ports |
USB | 8x USB 3.0 ports (2 front + 6 rear) |
Audio | 7.1 HD Jacks |
Keyboard/Mouse | 1x PS/2 Keyboard/Mouse port |
Serial Port / Header | 1x header |
TPM | 1x TPM 1.2 20-pin Header |
Expansion Slots |
PCI-Express | 4x PCI-E 3.0 x16 slots (runs at 16/16/NA/8 or 16/8/8/8) |
| 2x PCI-E 2.0 x1 (in x4) slots PCI-E slot #1 supports (x4) and slot #4 (x16) is disabled when an Intel Core i7-5820K is installed |
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | SMBIOS 2.7.1 |
| USB Keyboard support |
| Plug and Play (PnP) |
| DMI 2.3 |
| RTC (Real Time Clock) Wakeup |
| Hardware BIOS Virus protection |
| UEFI 2.3.1 |
| PCI 2.3 |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 |
| APM 1.2 |
Management |
Software | Watch Dog |
| SuperDoctor® 5 |
| SuperDoctor® III |
Power Configurations | Power-on mode for AC power recovery |
| ACPI Power Management |
| Keyboard Wakeup from Soft-Off |
| CPU Fan auto-off in sleep mode |
Chassis |
Form Factor | Mid-Tower |
Model | CSE-732D3-903B |
Dimensions and Weight |
Height | 16.7" (424mm) |
Width | 7.6" (193mm) |
Depth | 20.68" (525.3mm) |
Weight | Gross Weight: 35.5 lbs (16.1kg) |
| Net Weight: 29.5 lbs (13.4 kg) |
Available Colors | Black |
Front Panel |
Buttons | Power On/Off button |
LEDs | Power LED |
| System Information LED |
| Hard drive activity LED |
| Network activity LED |
Ports | 2x front USB 3.0 Ports |
| 2x front HD/AC97 Audio Ports |
Drive Bays |
Internal | Enterprise SATA HDD only recommended |
| 4x 3.5" fixed drive bays |
Peripheral | 2x 5.25" peripheral drive bays |
| 1x card reader module |
System Cooling |
Fans | 1x 12cm front cooling fan |
Power Supply |
Power Supply | 900W AC multi output power supply |
AC Voltage | 100-240 V, 50-60 Hz, 10-6 Amp |
+5V Standby | 3 Amp |
+12V1 | 25 Amp |
+12V2 | 25 Amp |
+12V3 | 25 Amp |
+12V4 | 25 Amp |
+5V | 25 Amp |
+3.3V | 25 Amp |
-12V | 0.5 Amp |
Certification | Gold Level |
Note: | • Max. continuous combined load on +3.3V and +5V output shall not exceed 155W. • Max. continuous combined load on +12V1, +12V2, +12V3 and +12V4 output shall not exceed 860W. |
PC Health Monitoring |
Voltage | +12V, +3.3V, +5V, 1.05 (PCH), 1.2V (VDIMM), 3.3V standby, Chassis intrusion header, Monitors CPU voltages, VBAT |
FAN | Status monitor for speed control |
| Status monitor for on/off control |
| Low noise fan speed control |
| Pulse Width Modulated (PWM) fan connectors |
| Total of 5 fan headers supporting up to 5 fans |
| 5 fan headers with tachometer status monitoring |
Temperature | Monitoring for CPU and chassis environment |
| CPU thermal trip support |
| I 2 C temperature sensing logic |
| Thermal Monitor 2 (TM2) support |
| PECI |
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Product SKUs |
Product SKUs | SYS-5038A-I (Black) |