- Products
- Supermicro SSG-2028R-E1CR48N 2U Storage Barebone Dual Processor
Supermicro SSG-2028R-E1CR48N 2U Storage Barebone Dual Processor
Barebone 2U SuperStorage Server for up to Dual Intel Xeon E5-2600 v4/v3 family processors - Supports up to 3.0TB DDR4 ECC 3DS LRDIMM up to 2400MHz in 24x 288-pin slots - On-Board : LSI 3108 SAS3 Hardware RAID (RAID 0, 1, 5, 6, 10, 50, 60), SATA3 6Gbps (RAID 0, 1, 5, 10), SIOM support for flexible networking options, IPMI 2.0, VGA - Includes : 48x 2.5in Hot-Swap SAS3/SATA3 drive bays, 2x 2.5in rear Hot-swap drive bays, 2x 24 port SAS3 12G expander backplanes, each supporting up to 24x 2.5in SAS3 drives, Add-On Card AOM-S3108M-H8, 2x Heatsing SNK-P0047PS, 1600W Redundant 80 Plus Titanium Power Supply (PWS-1K62A-1R), MBD-X10DSC+ Motherboard, CSE-226STS-R1K62P1 2U Chassis - (Black)
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4 † /v3 family; QPI up to 9.6GT/s
2. Up to 3TB † ECC 3DS LRDIMM, up to DDR4- 2400 † MHz; 24 DIMM slots
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
4. SIOM for flexible networking options
5. 48 Hot-swap 2.5" SAS3/SATA3 drive bays; optional 2 Hot-swap 2.5" rear SATA drive bays
6. Onboard Broadcom 3108 SAS3 HW RAID RAID 0, 1, 5, 6, 10, 50, 60
7. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
8. 5 Hot-swap 8cm redundant PWM fans
9. 1600W Redundant Power Supplies Titanium Level (96%)
(Simply Double)
Extra Specifications for Supermicro SSG-2028R-E1CR48N 2U Storage Barebone Dual Processor
Motherboard | ||
Motherboard | Super X10DSC+ | |
Processor/Cache | ||
CPU | Dual Socket R3 (LGA 2011) | |
Intel® Xeon® processor E5-2600 v4 † / v3 family (up to 145W TDP) * | ||
Cores / Cache | Up to 22 Cores † / Up to 55MB † Cache | |
System Bus | QPI up to 9.6 GT/s | |
Note | † BIOS version 2.0 or above is required | |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. | ||
System Memory | ||
Memory Capacity | 24x 288-pin DDR4 DIMM slots | |
Up to 3TB † ECC 3DS LRDIMM, 768GB ECC RDIMM | ||
Memory Type | 2400 † /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit | |
DIMM Sizes | LRDIMM: 64GB, 32GB | |
3DS LRDIMM: 128GB | ||
RDIMM: 32GB, 16GB, 8GB, 4GB | ||
Memory Voltage | 1.2 V | |
Error Detection | Corrects single-bit errors | |
On-Board Devices | ||
Chipset | Intel® C612 chipset | |
SAS3 | Broadcom 3108 SAS3 onboard | |
Hardware RAID 0, 1, 5, 6, 10, 50, 60 | ||
SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
ASPEED AST2400 BMC | ||
Network Controllers | SIOM support for flexible networking options | |
Video | ASPEED AST2400 BMC | |
Input / Output | ||
LAN | LAN ports via SIOM Add-On-Card | |
USB | 3 USB 3.0 ports (2 rear + 1 Type A) | |
Video | 1 VGA port | |
Serial Port / Header | 1 Fast UART 16550 port / 1 Header | |
Chassis | ||
Form Factor | 2U Rackmount | |
Model | CSE-226STS-R1K62P1 | |
Dimensions | ||
Width | 17.2" (437mm) | |
Height | 3.5" (89mm) | |
Depth | 30.2" (767mm) | |
With Cable Management Arm Installed: 35.2" (895mm) | ||
Available Colors | Black | |
Front Panel | ||
Buttons | Power On/Off button | |
System Reset button | ||
LEDs | System Information LED | |
Hard drive activity LED | ||
2 Network activity LEDs | ||
Power status LED | ||
Power fail LED | ||
Expansion Slots | ||
PCI-Express | 2 PCI-E 3.0 x16 slots | |
1 PCI-E 3.0 x8 slot | ||
Drive Bays | ||
Hot-swap | 48 Hot-swap 2.5" SAS3/SATA3 drive bays | |
Optional 2 rear Hot-swap 2.5" SATA drive bays | ||
Backplane | ||
Backplane | Two 24 port SAS3 12G expander backplanes, each supporting up to 24x 2.5" SAS3 drives | |
System Cooling | ||
Fans | 5 Hot-swap 8cm redundant PWM cooling fans | |
Power Supply | ||
Power Supply | 1600W Redundant Power Supplies with PMBus | |
Total Output Power | 1600W/1000W | |
Dimension (W x H x L) | 73.5 x 40 x 203 mm | |
Input | 100-127Vac / 13 - 9A / 50-60Hz | |
200-240Vac / 10 - 8A / 50-60Hz | ||
+12V | Max: 83.3A / Min: 0A (100-127Vac) | |
Max: 133A / Min: 0A (200-240Vac) | ||
12Vsb | Max: 2.1A / Min: 0A | |
Output Type | 25 Pairs Gold Finger Connector | |
Certification | Titanium Level | |
System BIOS | ||
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | |
BIOS Features | USB Keyboard support | |
Plug and Play (PnP) | ||
PCI 2.2 | ||
SMBIOS 2.3 | ||
ACPI 1.0 / 2.0 | ||
UEFI | ||
APM 1.2 | ||
Operating Environment / Compliance | ||
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) | |
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Product SKUs | ||
Product SKUs | SuperStorage 2028R-E1CR48N (Black) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-X10DSC+ | 1 | Super X10DSC+ Motherboard | |
Motherboard / Chassis | CSE-226STS-R1K62P1 | 1 | 2U Chassis | |
Add-on Card / Module | AOM-S3108M-H8L-P | 1 | sas3 roc mez for X10dsc | |
Backplane | BPN-SAS3-226SEL1-N4 | 2 | 24-port 2U Simply-Double SAS3 12Gbps single-expander backplane, support up to 20x 2.5-inch SAS3/SATA3 HDD/SSD and 4x NVMe/SAS3/SATA3 storage devices | |
Cable 1 | CBL-SAST-0836 | 2 | MINI SAS HD,INT,SAS3 SSD,48CM,32AWG | |
Cable 2 | CBL-SAST-0844 | 2 | SLIMLINE SAS to MiniSAS HD,INT,85CM,30D-41F-14D,no sidebend,32AWG | |
Heatsink / Retention | SNK-P0047PS | 2 | 1U Passive CPU Heat Sink for X9, X10 Systems Equipped w/ a Narrow ILM MB | |
* Power Supply | PWS-1K62A-1R | 2 | AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH | |
* Power Distributor | PDB-PT226S-8824 | 1 | 12V 25pair connector inpu with special wires 12V/168A output | |
* Cable 3 | CBL-0049L | 1 | CBL,FRONT CNTL,16 TO 16 PIN,RA,FLAT,54CM,28AWG | |
* Cable 4 | CBL-0160L | 2 | NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) | |
* Cable 5 | CBL-0459L | 2 | LATCH CLAMP,AC POWER CORD | |
* Cable 6 | CBL-CDAT-0728 | 2 | 4 Pin to 4 Pin I2C cable, 65cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH | |
* Cable 7 | CBL-PWEX-0760 | 1 | PWR EXT,2X4F/P4.2 TO 2X4F/P4.2,CPU 12V,13CM,16AWG,RoHS/REACH | |
* Cable 8 | CBL-PWEX-0901 | 1 | BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,33CM,18AWG, | |
* Cable 9 | CBL-PWEX-0902 | 2 | BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,50CM,18AWG, | |
* Cable 10 | CBL-PWEX-0904 | 4 | BPN PWEX,2X4F to 2X4F,GPU,P4.2,BLK*4,YEL*2,RED*2,72CM,18AWG, | |
* FAN 1 | FAN-0168L4 | 5 | 80x80x38 mm, 13.5K RPM, Middle Cooling Fan for SC226S Chassis (48-bay) | |
* Drive Tray(s) | MCP-220-00047-0B | 48 | Black gen 3rd hot-swap 2.5inch HDD tray | |
* Front Panel | MCP-280-00015-0N | 1 | Front control board for SC826 (inside the left handle),FP826 | |
* Front Panel | MCP-280-00018-0N | 1 | SC826 front control board adapter | |
* Drive Tray(s) | MCP-290-82607-0N | 1 | 826B/216B rear dummy cover for 2 X 2.5 |
Note:
• Parts with * are inside the chassis
• Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
2x 2.5" rear SATA drive bay to support (2+2) drive bays | CBL-PWEX-0650MCP-240-22603-0NMCP-240-22604-0NMCP-220-82616-0N | 1111 | 8-pin female to 2 Right Angle big 4-pin female power, 47/62cm2U Rear Window support (2 + 2) 2.5 HDD2U Rear plate support (2 + 2) 2.5 HDDRear 2.5 x 2 Hot swap HDD kit | |||
3108 Cache Protection | BTR-CV3108-FT1 | $ 322.00 | 0 | Broadcom 3108 CacheVault kit (ROHS, Reach) | ||
4 NVMe Drives Support | CBL-SAST-0929MCP-220-00121-0B | 44 | OCuLink 0.91 to MiniSAS HD,INT,PCIe NVMe SSD, 57CM, 34AWG.Black gen-3 2.5 NVMe drive tray | |||
Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) | |||
SIOM Network Card(s) | AOC-MGP-I2 | $ 74.00 | 0 | SIOM 2-port GbE, Intel i350-AM2 | ||
SIOM Network Card(s) | AOC-MGP-I4 | $ 98.00 | 0 | SIOM 4-port GbE, Intel i350-AM4 | ||
SIOM Network Card(s) | AOC-MTG-I2T | $ 240.50 | 0 | SIOM 2-port 10GBase-T, Intel X550 | ||
SIOM Network Card(s) | AOC-MTG-I4T | $ 414.50 | 0 | SIOM 4-port 10GBase-T, Intel X550 | ||
SIOM Network Card(s) | AOC-MTGN-I2S | $ 230.00 | 0 | SIOM 2-port 10G SFP+, Intel 82599ES | ||
SIOM Network Card(s) | AOC-MTG-I4S | 0 | SIOM 4-port 10G SFP+, Intel XL710 |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |