| Main Specifications |
| Device Type | Motherboard |
| Form Factor | Proprietary |
| Dimensions (WxDxH) | 8" x 13" (20.32cm x 33.02cm) |
| Processor |
| Compatible Processors | Intel Celeron, Intel Pentium, Intel 7th/6th Generation Core i3 series, Intel Xeon processor E3-1200 v6/v5 |
| Compatible Socket | Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 80W TDP |
| System Memory |
| Memory Capacity | 4 DIMM slots, 64GB Unbuffered ECC UDIMM, DDR4-2400MHz |
| Memory Type | 2400/2133/1866/1600 MT/s SDRAM 72-bit, 288-pin gold-plated DIMMs SDRAM 72-bit, 288-pin gold-plated DIMMs |
| DIMM Sizes | 4GB, 8GB, 16GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors |
| On-Board Devices |
| Chipset | Intel C236 |
| SATA RAID | Intel C236 controller for 6 SATA3 (6 Gbps) ports, RAID 0,1,5,10 |
| IPMI | Aspeed AST2400 BMC |
| Graphics | 1 ASPEED AST2400 BMC port(s) |
| Network Controllers | Dual LAN with Intel X540 10GBase-T Ethernet Controller |
| TPM | 1 TPM Header |
| Input / Output |
| SATA | 6 SATA3 (6Gbps) port(s) |
| LAN | 2 RJ45 10GBase-T ports |
| USB(s) | 3 USB 3 port(s) (1 Type A, 2 via header), 6 USB 2.0 port(s) (4 via header, 2 rear), 2 USB 3.0 port(s) (2 rear) |
| Video Output | 1 VGA port |
| Serial Ports | 2 COM Port(s) (1 header, 1 rear) |
| DOM | 2 SuperDOM (Disk on Module) power connectors |
| Expansion / Connectivity |
| Expansion Slots Total (Free) | 1 PCIe 3.0 x16 Left Riser Slot |
| M.2 | Key: M-key |
| Form Factor: 22110, 2280, 2260 |
| M.2 Interface: PCIe 3.0 x4 |
| System BIOS |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | ACPI 1.0 / 2.0 / 3.0 / 4.0, APM 1.2, DMI 2.3, Hardware BIOS Virus protection, PCI 2.3, Plug and Play (PnP), RTC (Real Time Clock) Wakeup, SMBIOS 2.7.1, UEFI 2.3.1, USB Keyboard support |
| Management |
| Software | SuperDoctor 5, NMI, SUM, SPM, Intel Node Manager, SSM, IPMI2.0, Watchdog |
| Power Configurations | Power-on mode for AC power recovery, ACPI Power Management |
| FAN | 6x 4-pin fan headers (up to 6 fans), Thermal control tachometer fan connectors, Fan speed control, Overheat LED indication |
| PC Health Monitoring |
| Voltage | VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, 6 -fan status, +5V standby, +5V, +3.3V, +12V |
| LED | UID/Remote UID, CPU / System Overheat LED |
| Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI |
| Other Features | WOL, M.2 NGFF connector, CPU thermal trip support for processor protection, Control of power-on for recovery from AC power loss, VHD |
| Environmental |
| Operating Environment | Non-Operating Temperature Range: -40°C - 70°C (-40°F - 158°F) |
| Operating Relative Humidity Range: 8% - 90% (non-condensing) |
| Non-Operating Relative Humidity Range: 5% - 95% (non-condensing) |
| Operating Temperature Range: 0°C - 50°C (32°F - 122°F) |
| Optional Parts List |
| Optional I/O Shield | MCP-240-00159-0N |
