- Products
- Firewall, Compact, VoIP, Security Appliances
- Supermicro SYS-1029TP-DC0R Twin Barebone Dual Intel Xeon Scalable 2nd Generation Processors Two Hot-Pluggable Nodes
Supermicro SYS-1029TP-DC0R Twin Barebone Dual Intel Xeon Scalable 2nd Generation Processors Two Hot-Pluggable Nodes
• Mission-critical applications
• High Availability Storage
• Appliance Platform
Barebone 1U Rackmount SuperServer TwinPro with 2 Hot-Pluggable Nodes. Each node supports dual Intel Xeon Scalable Processors Gen. 2, Intel C621 chipset, Up to 4TB DDR4 ECC 2933MHz memory, 4 Hot-swap 2.5in SAS3 drive Bays via Broadcom 3008, Optional SIOM Network Card, Redundant 1000W Power Supply (CSE-809H-R1K05P2 + MBD-X11DPT-PS)
Two hot-pluggable systems (nodes) in a 1U form factor. Each node supports the following:
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 16 DIMMs; up to 4TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM
3. 2 PCI-E 3.0 x16 slots
4. Flexible Networking support via SIOM; Dedicated IPMI 2.0 LAN
5. 4 Hot-swap 2.5" SAS3 drive bays
6. Broadcom 3008 SAS3 controller; SW RAID
7. 2 SuperDOM onboard or optional 2 M.2 carrier
8. Up to 1000W Redundant Power Supplies Titanium Level (96%)
Extra Specifications for Supermicro SYS-1029TP-DC0R Twin Barebone Dual Intel Xeon Scalable 2nd Generation Processors Two Hot-Pluggable Nodes
| Motherboard (Two per System) | ||
| Motherboard (Two per System) | Super X11DPT-PS | |
| System Memory (per Node) | ||
| Memory Capacity | 16 DIMM slots | |
| Up to 4TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
| Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro | |
| On-Board Devices (per Node) | ||
| Chipset | Intel® C621 chipset | |
| SAS | Broadcom 3008 SAS3 (12Gbps) controller; SW RAID 0, 1, 10 support | |
| Network Controllers | Barebones and Complete System must have at least one SIOM card installed per node | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| Graphics | ASPEED AST2500 BMC | |
| Input / Output (per Node) | ||
| SAS | 4 SAS3 (12Gbps) ports | |
| LAN | 1 RJ45 Dedicated IPMI LAN port | |
| USB | 2 USB 3.0 ports (rear) | |
| VGA | 1 VGA port | |
| Serial Port / Header | 1 Fast UART 16550 port / 1 Header (internal) | |
| Others | 2 SuperDOM support on the motherboard | |
| 1 NVMe or 2 SATA M.2 (22x80/60/42 mm) support with option part: AOC-SMG3-2H8M2 | ||
| M.2 and SuperDOM are for OS boot and they cannot coexist | ||
| System BIOS | ||
| BIOS Type | AMI 32MB SPI Flash ROM | |
| Management | ||
| Software | NMI | |
| Watchdog | ||
| KVM with dedicated LAN | ||
| SuperDoctor® 5 | ||
| Intel® Node Manager | ||
| IPMI 2.0 | ||
| SSM , SPM , SUM | ||
| Power Configurations | ACPI Power Management | |
| PC Health Monitoring | ||
| CPU | 4+1 Phase-switching voltage regulator | |
| Monitors for CPU Cores, Chipset Voltages, Memory. | ||
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| Fans with tachometer monitoring | ||
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | ||
| Chassis | ||
| Form Factor | 1U Rackmount | |
| Model | CSE-809H-R1K05P3 | |
| Dimensions and Weight | ||
| Width | 17.2" (437mm) | |
| Height | 1.7" (43mm) | |
| Depth | 28.25" (718mm) | |
| Package | 29.6" (W) x 8" (H) x 38.4" (L) | |
| Weight | Gross Weight: 48.1 lbs (21.9 kg) | |
| Net Weight: 33.5 lbs (15.2 kg) | ||
| Front Panel | ||
| Buttons | Power On/Off button | |
| UID button | ||
| LEDs | Network activity LEDs | |
| Power status LED | ||
| HDD activity LED | ||
| Universal Information (UID) LED | ||
| Expansion Slots (per Node) | ||
| PCI-Express | 2 PCI-E 3.0 x16 Low-profile slots | |
| 1 SIOM card support Note: Barebones and Complete System must bundle with SIOM | ||
| Drive Bays (per Node) | ||
| Hot-swap | 4 Hot-swap 2.5" SAS3/SATA3 drive bays | |
| Backplane | ||
| Backplane | SAS3 backplane | |
| System Cooling | ||
| Fans | 3 Heavy duty counter rotating fans with air shroud and optimal fan speed control | |
| PowerStick Power Supply | ||
| PowerStick Power Supply | 1000W 1U Redundant Power Supplies with PMBus | |
| Total Output Power | 800W: 100 – 127Vac | |
| 1000W: 200 – 240Vac | ||
| Dimension (W x H x L) | 38 x 40 x 360 mm | |
| Input | 100-127Vac / 9-7.5A / 50-60Hz | |
| 200-240Vac / 6-5A / 50-60Hz | ||
| +12V | Max: 66.7A / Min: 0A (100-127Vac) | |
| Max: 83A / Min: 0A (200-240Vac) | ||
| +5Vsb | Max: 4A / Min: 0A | |
| Output Type | Gold Finger Connector (16 Power Pin, 14 Signal Pin) | |
| Certification | Titanium Level | |
| Operating Environment | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
| Operating Relative Humidity: 8% to 90% (non-condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
| Processor (per Node) | ||
| CPU | Dual Socket P (LGA 3647) | |
| 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s | ||
| Support CPU TDP 70-145W (Consult with SYS PM for higher CPU TDP Supports) | ||
| Cores | Up to 28 Cores | |
| Note | * Processors ending N or S are optimized for networking and storage applications. Customer need POC their application and observe any thermal throttling before large deployment. | |
| ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) | ||
| Product SKUs | ||
| Product SKUs | SuperServer 1029TP-DC0R (Black) | |
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-X11DPT-PS | 2 | Super X11DPT-PS Motherboards | |
| Motherboard / Chassis | CSE-809H-R1K05P3 | 1 | 1U Chassis | |
| Backplane | BPN-ADP-S3008L-L6IP | 2 | LSI 3008, SAS 12Gbs (X6 port inside) | |
| Backplane | BPN-SAS3-809H | 1 | 8-port 1U TwinPro SAS3 12Gbps (4 drives per node) backplane, support up to 8x 2.5-inch SAS3/SATA3 HDD/SSD | |
| Cable 1 | CBL-PWCD-0900 | 2 | PWCD,US/EU/Canada/China/Australia,IEC60320 C14 TO C13,4FT,17AWG | |
| Manual | MNL-2112-QRG | 1 | 1029TP-DTR/DC0R/DC1R Quick Reference Guide | |
| Riser Card | RSC-P-6 | 2 | RSC-P-6 (1U LHS TwinPro RSC with 1 PCI-Ex16),RoHS | |
| Riser Card | RSC-R1UTP-E16R | 2 | 1U RHS TwinPro Riser card with one PCI-E x16 slot | |
| Heatsink / Retention | SNK-P0067PS | 2 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
| Heatsink / Retention | SNK-P0067PSM | 2 | 1U Passive CPU Heat Sink with a 26-mm Wide Middle Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
| Power Supply | PWS-1K05A-1R | 2 | 1U 1000W Redundant Power Supply Titanium, 38X40X360mm length |
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| TPM security module (optional, not included) | AOM-TPM-9670V | $ 56.50 | 1 | SPI capable TPM 2.0 with Infineon 9670 controller with vertical form factor | ||
| TPM security module (optional, not included) | AOM-TPM-9671V | $ 56.50 | 1 | SPI capable TPM 1.2 with Infineon 9670 controller with vertical form factor | ||
| Carrier Card | AOC-SMG3-2H8M2 | $ 38.50 | 0 | AOC supports 2280 M.2 form factor SSD (1 NVMe or 2 SATA),FST-SCRW-0121L is included in AOC-SMG3-2H8M2 | ||
| Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
| Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |