Product SKUs |
AS -2123BT-HNC0R | A+ Server 2123BT-HNC0R ( Black ) |
Motherboard (per Node) |
Motherboard (per Node) | Super H11DST-B |
Processor/Chipset (per Node) |
CPU | Dual AMD EPYC™ 7001/7002 * series Processors ( * Board revision 2.x required ) |
| Socket SP3 |
| Supports CPU TDP 200W / cTDP up to 200W ** |
Cores | Up to 32 Cores (Board revision 1.x + 7001 Processors) |
| Up to 64 Cores (Board revision 2.x + 7002 Processors) |
System Memory (per Node) |
Memory Capacity | 16 DIMM slots |
| Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) |
| Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) |
| 8-channel memory bus |
| For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) |
| DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors) |
Memory Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB * ( * Board revision 2.x required + 7002 processors ) |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
On-Board Devices (per Node) |
Chipset | System on Chip |
SAS | SAS3 (12Gbps) via Broadcom 3008; IT mode |
Network | 1 PCI-E 3.0 x16 SIOM LAN Networking Slot for flexible networking, see SIOM LAN options support matrix (Must bundle with at least one SIOM network card) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Video | ASPEED AST2500 BMC |
Input / Output (per Node) |
LAN | 1 RJ45 Dedicated IPMI LAN port |
| Provided via SIOM (optional) |
USB | 2 USB 3.0 ports (rear) |
Video | 1 VGA port |
DOM | 1 Super DOM (Disk on Module) port |
Others | 1 COM port (header) |
| 1 TPM 2.0 header |
System BIOS (per Node) |
BIOS Type | AMI 128Mb SPI Flash ROM |
Management (per Node) |
Software | IPMI 2.0 |
| KVM with dedicated LAN |
| SSM , SUM |
| SuperDoctor® 5 |
| Watch Dog |
Power Configurations | ACPI / APM Power Management |
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-217BHQ+-R2K22BP2 |
Dimensions and Weight |
Width | 17.68" (449mm) |
Height | 3.47" (88mm) |
Depth | 28.75" (730mm) |
Package | 24.33" (618mm) H x 9.57" (243mm) W x 45.08" (1145mm) D |
Weight | Net Weight: 54.5 lbs (24.7 kg) |
| Gross Weight: 85 lbs (38.6 kg) |
Available Colors | Black |
Front Panel (per Node) |
Buttons | Power On/Off button |
| UID button |
LEDs | Power status LED |
| HDD activity LED |
| Network activity LEDs |
| Universal Information (UID) LED |
Expansion Slots (per Node) |
PCI-Express | 2 PCI-E 3.0 (x16) Low-profile slots |
| 1 SIOM card support (must bundle with network card) |
M.2 | Interface: 1 SATA/PCI-E 3.0 x4 |
| Form Factor: 2280, 22110 |
| Key: M-key |
Drive Bays (per Node) |
Hot-swap | 6 Hot-swap 2.5" SAS3 drive bays or 4 NVMe + 2 SAS3 Hot-swap 2.5" Note: NVMe Gen4 drives may only operate at Gen3 speed |
System Cooling |
Fans | 4 Heavy duty 8cm PWM fans |
Power Supply |
Power Supply | 2200W Redundant Power Supplies with PMBus |
Total Output Power | 1200W/1800W/1980W/2090/2200W |
Dimension (W x H x L) | 45 x 40 x 480 mm |
Input | 1200W: 100-127Vac / 50-60Hz |
| 1800W: 200-220Vac / 50-60Hz |
| 1980W: 220-230Vac / 50-60Hz |
| 2090W: 230-240Vac / 50-60Hz |
| 2090W: 180-220Vac (for UL/cUL only) |
| 2200W: 220-240Vac (for UL/cUL only) |
| 2090W: 230-240Vdc (for CCC only) |
+12V | Max: 150A / Min: 0A (200-220Vac) |
| Max: 165A / Min: 0A (220-230Vac) |
| Max: 100A / Min: 0A (100-127Vac) |
| Max: 174.17A / Min: 0A (230-240Vac) |
| Max: 174.17A / Min: 0A (180-220Vac, UL/cUL only) |
| Max: 183.33A / Min: 0A (220-240Vac, UL/cUL only) |
| Max: 174.17A / Min: 0A (230-240Vdc, CCC only) |
12Vsb | Max: 2.1A / Min: 0A |
Output Type | Gold Finger |
Certification | Titanium Level |
Operating Environment |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) |
| Operating Temperature: 10°C ~ 30°C (50°F ~ 86°F) * Support for operating above 30°C is available in certain system configurations. Contact your Supermicro sales rep or Technical Support for more details. |