- Products
- Virtualization
- Supermicro SYS-1029UZ-TN20R25M 1U Barebone Dual Intel Processor
Supermicro SYS-1029UZ-TN20R25M 1U Barebone Dual Intel Processor
• Virtualization
• Cloud Computing
• High Density Enterprise Server
• Software Defined Storage
Barebone 1U Rackmount SuperServer, Dual Intel Xeon Scalable Processors Gen. 2, Intel C621 chipset, Up to 6TB DDR4 ECC 2933MHz memory, 20 Hot-swap 2.5in drive Bays (8 NVMe + 2 SAS/SATA3/NVMe hybrid) + 10 NVMe, Dual 25GbE SFP28, Redundant 1600W Redundant Power Supply (CSE-116UTQ20-R1K62-T + MBD-X11DPU-Z+)
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM ††
3. Up to 2 PCI-E 3.0 x8 slots (FH, FL); For 20 NVMe configuration, only 1 PCI-E 3.0 x8 is available For 18 NVMe configuration, 2 PCI-E 3.0 x8 will be available
4. 2x 25G SFP28 Ethernet ports
5. 20 Hot-swap 2.5" 7mm drive bays; up to 20 NVMe (CPU1: 10 NVMe, CPU2: 8 NVMe + 2 NVMe/ SATA/SAS hybrid); 1 M.2 NVMe port, Optional extra M.2 NVMe and SATA3 ports
6. 8 Heavy duty fans w/ optimal fan speed control; 2 air shrouds
7. 1600W Redundant Power Supplies Titanium Level (96%)
Extra Specifications for Supermicro SYS-1029UZ-TN20R25M 1U Barebone Dual Intel Processor
Motherboard | ||
Motherboard | Super X11DPU-ZE+ | |
System Memory | ||
Memory Capacity | 24 DIMM slots | |
Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
Supports Intel® Optane™ DCPMM †† | ||
Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
On-Board Devices | ||
Chipset | Intel® C621 chipset | |
SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 | |
Network Connectivity | 2 25GbE SFP28 ports via AOC-URN4-M2TS (Mellanox ConnectX-4 Lx EN) | |
Download networking card drivers here | ||
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Graphics | ASPEED AST2500 BMC | |
Input / Output | ||
NVMe | 8 NVMe ports + 2 SAS/SATA3/NVMe Hybrid Ports (from CPU 1) | |
10 NVMe ports (from CPU 2) | ||
LAN | 1 RJ45 Dedicated IPMI LAN port | |
2 25GbE SFP28 ports | ||
USB | 3 USB 3.0 ports (2 rear, 1 Type A) | |
2 USB 2.0 ports (front) | ||
Video | 1 VGA port | |
Serial Port | 1 Serial header | |
DOM | 2 Super DOM (Disk on Module) ports | |
System BIOS | ||
BIOS Type | AMI 32Mb SPI Flash ROM | |
Management | ||
Software | NMI | |
KVM with dedicated LAN | ||
SuperDoctor® 5 | ||
Intel® Node Manager | ||
IPMI 2.0 | ||
SSM , SPM , SUM | ||
WatchDog | ||
Power Configurations | ACPI Power Management | |
PC Health Monitoring | ||
CPU | 4+1 Phase-switching voltage regulator | |
Monitors for CPU Cores, Chipset Voltages, Memory. | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Fans with tachometer monitoring | ||
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | ||
Chassis | ||
Form Factor | 1U Rackmount | |
Model | CSE-116UTS-R1K62P-T | |
Dimensions and Weight | ||
Height | 1.7" (43mm) | |
Width | 17.2" (437mm) | |
Depth | 27.8" (706mm) | |
Gross Weight | 48 lbs (21.8 kg) | |
Available Color | Black | |
Front Panel | ||
Buttons | Power On/Off button | |
System UID button | ||
LEDs | Power LED | |
Network activity LEDs | ||
Hard drive activity LED | ||
UID LED | ||
Expansion Slots | ||
PCI-Express | 2 PCI-E 3.0 x8 slots (FH, FL) For 20 NVMe configuration, only 1 PCI-E 3.0 x8 is available. For 18 NVMe configuration, 2 PCI-E 3.0 x8 will be available. (Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) | |
Drive Bays / Storage | ||
Hot-swap | 20 Hot-swap 2.5" 7mm drive bays | |
20 NVMe (CPU1: 10 NVMe, CPU2: 8 NVMe + 2 NVMe/SATA/SAS hybrid) | ||
M.2 | 2 M.2 PCI-E 3.0 x4 M-Key NVMe (2260/2280/22110) via optional add-on card AOC-SLG3-2M2 | |
1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) or 1 M.2 M-Key SATA3 (2240/2260/2280/22110) via optional parts | ||
System Cooling | ||
Fans | 8 Heavy duty fans with optimal fan speed control | |
Air Shroud | 2 Air Shroud | |
Power Supply | ||
Power Supply | 1600W Redundant Power Supplies with PMBus | |
Total Output Power | 1600W/1000W | |
Dimension (W x H x L) | 73.5 x 40 x 203 mm | |
Input | 100-127Vac / 13 - 9A / 50-60Hz | |
200-240Vac / 10 - 8A / 50-60Hz | ||
+12V | Max: 83.3A / Min: 0A (100-127Vac) | |
Max: 133A / Min: 0A (200-240Vac) | ||
12Vsb | Max: 2.1A / Min: 0A | |
Output Type | 25 Pairs Gold Finger Connector | |
Certification | Titanium Level | |
Operating Environment | ||
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | ||
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Processor | ||
CPU | Dual Socket P (LGA 3647) | |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , 3 UPI up to 10.4GT/s | ||
Support CPU TDP 70-205W | ||
Cores | Up to 28 Cores | |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) | |
Product SKUs | ||
Product SKUs | SuperServer 1029UZ-TN20R25M (Black) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-X11DPU-ZE+ | 1 | Super X11DPU-ZE+ Motherboard | |
Motherboard / Chassis | CSE-116UTS-R1K62P-T | 1 | CSE-116UTS-R1K62P-T | |
Add-on Card / Module | AOC-SLG3-2E4R-P | 2 | NVMe AOC by 8,HF,RoHS/REACH | |
Add-on Card / Module | AOC-SLG3-4E4R-P | 1 | NVMe AOC by 16,HF,RoHS/REACH | |
Add-on Card / Module | AOC-URN4-M2TS-P | 1 | 1U Ultra Riser 2-port 25GbE SFP28, based on Mellanox Connect | |
Backplane | BPN-NVME3-116UN | 1 | 20-port 1U (CSE116U) NVMe direct-attached backplane, support up to 20x 7mm NVMe SSDs, 2 are hybrid ports also support SAS/SATA devices | |
Cable 1 | CBL-PWEX-1018 | 1 | BPN PWR,2X4F/GPU-White to 2x2F,P4.2, 12V, 42CM,18AWG, 11A/pin, -25~85C | |
Cable 2 | CBL-PWEX-1019 | 1 | BPN PWR,2X4F/GPU-White to 2x2F,P4.2, 12V, 67CM,18AWG, 11A/pin, -25~85C | |
Cable 3 | CBL-SAST-0819 | 2 | OCuLink v 1.0,INT,PCIe NVMe SSD, 65CM,34AWG,RoHS/REACH | |
Cable 4 | CBL-SAST-0842 | 2 | MiniSAS HD source to OcuLink v 1.0,INT,PCIe, 85CM,34AWG,RoHS | |
Cable 5 | CBL-SAST-0847 | 8 | OcuLink v 1.0,INT,PCIe NVMe SSD, 76CM,34AWG | |
Cable 6 | CBL-SAST-0849 | 2 | MiniSAS HD source to OcuLink v 1.0,INT,PCIe, 57CM,34AWG | |
Cable 7 | CBL-SAST-0850 | 4 | MiniSAS HD source to OcuLink v 1.0,INT,PCIe, 37CM,34AWG | |
Cable 8 | CBL-SAST-0974-1 | 2 | OcuLink v 1.0,INT,PCIe NVMe SSD, 37CM,34AWG | |
Cable 9 | CBL-SAST-1015-1 | 1 | MINI SAS-2 SATA (RA),6G,INT,52CM,62CM SB,30AWG,RoHS | |
Air Shroud | MCP-310-11601-0B | 1 | Mylar air shroud for SC116U (X11 24DIMM, left side) | |
Air Shroud | MCP-310-11602-0B | 1 | Mylar air shroud for SC116U (X11 24DIMM, right side) | |
Riser Card | RSC-UMR-8 | 1 | 1U Ultra RHS Riser Card with 1 PCIE/SATA Hybrid M.2 &1 PCIE | |
Riser Card | RSC-UN4-88 | 1 | RSC-UN4-88 | |
Heatsink / Retention | SNK-P0067PS | 2 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
* Power Supply | PWS-1K62A-1R | 2 | AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH | |
* Cable 10 | CBL-0160L | 2 | NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) | |
* Cable 11 | CBL-0263L | 1 | USB 2.0,INT,2X5/P2.54 TO 2X5/P2.54,2 CH,80CM,26AWG | |
* Cable 12 | CBL-0335L | 1 | CBL,FRONT CNTL,20 TO 20 PIN,RA,RND TUBE,73CM,28AWG | |
* FAN 1 | FAN-0101L4 | 8 | 40x56,4 Pin PWM,Primary for SC809,111, Sec.for SC816,819,808 | |
* Drive Tray(s) | MCP-220-00143-0B | 20 | SC116U Tool-less 2.5\" NVME HDD Tray (fit up to 7mm only) | |
* Rear Window | MCP-240-81915-0N | 1 | Rear window for SC819U, 119U tool-less chassis (m2TS) | |
* Front Panel | MCP-280-11603-0N | 1 | 116 front panel kit with FP cable, support 2* USB2.0, slim | |
* Rail Set | MCP-290-00102-0N | 1 | Outer rail, quick-release type, 25.6\" to 33.05\" | |
* Rail Set | MCP-290-00112-0N | 1 | Inner rail, extension, long (quick) for 1U 17.2 | |
* Rail Set | MCP-290-00120-0N | 2 | Inner rail, front, quick-release type (thumb screw appiled) | |
* Air Shroud | MCP-310-81905-0B | 1 | Plastic air shroud for SC819U, 119U, 829U, 219U (PWS),RoHS/REACH | |
* FAN 2 | MCP-340-00030-0N | 1 | 40x56,4 Pin PWM,Primary for SC809, Sec. for SC816,819,808 |
Note:
• Parts with * are inside the chassis
• Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
Add-on card for internal M.2 NVMe | AOC-SLG3-2M2 | $ 52.00 | 1 | Low Profile PCIe x8 add-on card supports 2 PCI-E 3.0 x4 M-Key M.2 NVMe Modules | ||
Storage Control Card and Cable for 2x Hybrid NVMe/SAS Drive Bays | AOC-S3008L-L8e &1 CBL-SAST-0699 | 1 | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA | |||
Storage Control Card and Cable for 2x Hybrid NVMe/SAS Drive Bays | AOC-S3008L-L8i &1 CBL-SAST-0699 | 1 | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E | |||
Storage Control Card and Cable for 2x Hybrid NVMe/SAS Drive Bays | AOC-S3108L-H8iR &1 CBL-SAST-0699 | 1 | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60 | |||
2.5" 7mm SATA/SAS Drive Trays | MCP-220-00151-0B | $ 22.50 | 1~2 | SC116U 2.5" Tool-less SAS/SATA HDD Tray (fit up to 7mm only) | ||
Cable for internal M.2 SATA | CBL-SAST-0538 | $ 22.00 | 1 | 29cm 30AWG SATA S-RA cable | ||
Air Shroud for internal M.2 | MCP-310-11603-0B | $ 15.50 | 1 | Mylar air shroud for SC116U (X11 24DIMM, M.2) | ||
Compatible Networking Cables and Transceivers for System default Networking (AOC-URN4-m2TS) | - | 1~2 | Networking Cables and Transceivers Compatibility Matrix | |||
Network Card(s) | AOC-SGP-i2/4 | 0 | Standard LP, 2/4x GbE RJ45, PCI-E x4, Intel i350 | |||
Network Card(s) | AOC-STGN-i1S/i2S | 0 | Standard LP, 1/2x 10GbE SFP+, PCI-E x8, Intel 82599EN | |||
Network Card(s) | AOC-STGF-i2S | 0 | Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel XL710-BM2 | |||
Network Card(s) | AOC-STG-i4S | 0 | Standard LP, 4x 10GbE SFP+, PCI-E x8, Intel XL710 | |||
Network Card(s) | AOC-STG-b4S | 0 | Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S | |||
Network Card(s) | AOC-STG-i2T | $ 312.50 | 0 | Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540 | ||
Network Card(s) | AOC-STGS-i1/2T | 0 | Standard LP, 1/2x 10GbE RJ45, PCI-E x8, Intel X550 | |||
Network Card(s) | AOC-STG-i4T | 0 | Standard LP, 4x 10GbE RJ45, PCI-E x8, Intel XL710 | |||
Network Card(s) | AOC-STG-i2 | 0 | Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB | |||
Network Card(s) | AOC-S25G-m2S | 0 | Standard LP, 2x 25GbE SFP28, Mellanox ConnectX-4 LX EN | |||
Network Card(s) | AOC-S40G-i2Q | $ 385.00 | 0 | Standard LP 2-port 40GbE controller, Intel Fortville XL710 | ||
Network Card(s) | More | 0 | AOC Compatibility Matrix | |||
1U Cable Management Arm | MCP-290-00152-0N | $ 147.00 | 1 | 1U Supermicro Cable Management Arm 2nd Gen | ||
CacheVault(s) | BTR-CV3108-1U1 | $ 322.00 | 0 | CacheVault for Broadcom 3108 with Supercap mounting in 1U 40x56 fan tray | ||
CacheVault(s) | BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 | 0 | CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location | |||
TPM security module | AOM-TPM-9670V | $ 52.00 | 1 | SPI capable TPM 2.0 with Infineon 9670 controller,Vertical form factor | ||
TPM security module | AOM-TPM-9671V | $ 52.00 | 1 | SPI capable TPM 1.2 with Infineon 9670 controller,Vertical form factor | ||
Intel VROC RAID Key | AOC-VROCINTMOD | 1 | Intel VROC, RAID 0, 1, 5, 10 (Intel SSD Only) | |||
Intel VROC RAID Key | AOC-VROCSTNMOD | 1 | Intel VROC Standard, RAID 0, 1, 10 | |||
Intel VROC RAID Key | AOC-VROCPREMOD | $ 342.50 | 1 | Intel VROC Premium, RAID 0, 1, 5, 10 | ||
Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |