- Products
- Data Center Optimized Applications, Value IaaS
- Supermicro SSG-6049P-E1CR60L 4U Storage Barebone Dual Processor
Supermicro SSG-6049P-E1CR60L 4U Storage Barebone Dual Processor
• Corporate Database
• Database Processing & Storage
• Enterprise Server
• HPC, Data Center
• iSCSI SAN
Barebone 4U Rackmount SuperServer, Dual Intel Xeon Scalable Processors Gen.2, Intel C621 chipset, Up to 6TB DDR4 ECC 2933MHz memory, Broadcom 3008 SAS3, SW RAID (IT Mode), 60 Hot-swap 3.5in drive bays, 2 Rear hot-swap 2.5in drive bays, optional 6 NVMe bays, SIOM support for flexible networking options, Redundant 1600W Power Supply (CSE-946STS-R2K05P + MBD-X11DSC+)
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 24 DIMMs; up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM ††
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8, 1 SIOM card support (flexible networking) Note: must bundle with Network card
4. 60 Hot-swap 3.5" SAS3/SATA3 drive bays with SES3 (can support 2.5" without converter tray); 2 rear Hot-swap 2.5" drive bays; optional 6 NVMe bays
5. Broadcom 3008 SAS3, IT mode
6. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
7. 5 Hot-swap 8cm rear exhaust PWM fans
8. 2000W Redundant Power Supplies Titanium Level (96%)
Extra Specifications for Supermicro SSG-6049P-E1CR60L 4U Storage Barebone Dual Processor
Motherboard | ||
Motherboard | Super X11DSC+ | |
Processor/Cache | ||
CPU | Dual Socket P (LGA 3647) | |
Support CPU TDP 70-205W | ||
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , 3 UPI up to 10.4GT/s | ||
Cores | Up to 28 Cores | |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) | |
System Memory | ||
Memory Capacity | 24 DIMM slots | |
Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
Supports Intel® Optane™ DCPMM †† | ||
Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
On-Board Devices | ||
Chipset | Intel® C621 chipset | |
SAS | SAS3 (12Gbps) via Broadcom 3008 AOC; IT Mode | |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Graphics | ASPEED AST2500 BMC | |
Input / Output | ||
Serial ATA | 4 SATA3 (6Gbps) ports | |
LAN | 1 RJ45 Dedicated IPMI LAN port | |
USB | 2 USB 3.0 ports (rear) | |
1 Type A | ||
VGA | 1 VGA D-Sub connector port | |
Serial Port / Header | 1 Fast UART 16550 port / 1 Header | |
System BIOS | ||
BIOS Type | AMI UEFI | |
Management | ||
Software | NMI | |
Watchdog | ||
SuperDoctor® 5 | ||
Intel® Node Manager | ||
IPMI 2.0 | ||
SSM , SPM , SUM | ||
PC Health Monitoring | ||
CPU | 4+1 Phase-switching voltage regulator | |
Monitors for CPU Cores, Chipset Voltages, Memory. | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Fans with tachometer monitoring | ||
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | ||
Chassis | ||
Form Factor | 4U Rackmount | |
Model | CSE-946STS-R2K05P | |
Dimensions | ||
Width | 17.2" (437mm) | |
Height | 7" (178mm) | |
Depth | 30.2" (767mm) | |
Package | 33.25" (W) x 28" (H) x 42.5" (D) | |
Weight | Gross Weight: 170.5 lbs (77.3kg) | |
Net Weight: 118 lbs (53.5 kg) | ||
Available Colors | Black | |
Front Panel | ||
Buttons | Power On/Off button | |
System Reset button | ||
LEDs | System Information LED | |
Network activity LEDs | ||
Hard drive activity LED | ||
Power status LED | ||
Power fail LED | ||
Expansion Slots | ||
PCI-Express | 2 PCI-E 3.0 x16 slots | |
1 PCI-E 3.0 x8 slot | ||
1 SIOM card support (must bundle with network card) | ||
Drive Bays | ||
Hot-swap | 2 Rear Hot-swap 2.5" SATA drive bays | |
60 Hot-swap 3.5" SAS3/SATA3 drive bays | ||
Optional | 6 NVMe bays (optional) | |
Backplane | ||
Backplane | SAS3/SATA3 single expander per backplane | |
System Cooling | ||
Fans | 5 Hot-swap 8cm rear exhaust PWM fans | |
Power Supply | ||
Power Supply | 2000W Redundant Power Supplies with PMBus | |
Total Output Power | 1000W: 100 – 120Vac | |
1800W: 200 – 220Vac | ||
1980W: 220 – 230Vac | ||
2000W: 230 – 240Vac | ||
2000W: 200 – 240Vac (UL/CUL only) | ||
Dimension (W x H x L) | 73.5 x 40 x 265 mm | |
Input | 100-120Vac / 12.5-9.5A / 50-60Hz | |
200-220Vac / 10-9.5A / 50-60Hz | ||
220-230Vac / 10-9.8A / 50-60Hz | ||
230-240Vac / 10-9.8A / 50-60Hz | ||
200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) | ||
+12V | Max: 83.3A / Min: 0A (100-120Vac) | |
Max: 150A / Min: 0A (200-220Vac) | ||
Max: 165A / Min: 0A (220-230Vac) | ||
Max: 166.7A / Min: 0A (230-240Vac) | ||
Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only) | ||
12Vsb | Max: 2.1A / Min: 0A | |
Output Type | 25 Pairs Gold Finger Connector | |
Certification | Titanium Level | |
Operating Environment | ||
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
Product SKUs | ||
Product SKUs | SuperStorage 6049P-E1CR60L (Black) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-X11DSC+ | 1 | Super X11DSC+ Motherboard | |
Motherboard / Chassis | CSE-946STS-R2K05P | 1 | 4U Chassis | |
Rear Window | MCP-240-94601-0N | 0 | SC946S rear window w/ 3x LP slots for X10DSC+ | |
Rear Window | MCP-290-00132-0N | 0 | SIOM dummy cover for 226S/826S/946S | |
Add-on Card / Module | AOM-S3008M-L8-P | 1 | Mezz card with LSI 3008 controller | |
Backplane | BPN-SAS3-826TQ-B2B | 1 | 2-port 2U SAS3 12Gbps backplane, support up to 2x 2.5-inch SAS3/SATA3 HDD/SSD | |
Backplane | BPN-SAS3-946SEL1 | 2 | 30-port 4U 946S Top-load SAS3 12Gbps single-expander midplane, support up to 30x 3.5-inch SAS3/SATA3 HDD/SSD | |
Cable 1 | CBL-CDAT-0728 | 2 | 4 Pin to 4 Pin I2C cable, 65cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH | |
Cable 2 | CBL-PWCD-0578 | 2 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG | |
Cable 3 | CBL-PWEX-0861 | 1 | Powerlug to 5.7 Radsok, black 12AWG, 32cm for SC946S | |
Cable 4 | CBL-PWEX-0862 | 1 | Powerlug to 5.7 Radsok, black 12AWG, 53cm for SC946S | |
Cable 5 | CBL-PWEX-0863 | 1 | Powerlug to 5.7 Radsok, yel 12AWG, 32cm for SC946S | |
Cable 6 | CBL-PWEX-0864 | 1 | Powerlug to 5.7 Radsok, yel 12AWG, 53cm for SC946S | |
Cable 7 | CBL-SAST-0833 | 2 | SLIMLINE SAS, INT, 55MM, 32AWG | |
Cable 8 | CBL-SAST-0855 | 2 | SLIMLINE SAS, INT, 60CM, 15D-30F-15D, 32AWG | |
Heatsink / Retention | SNK-P0068PS | 2 | 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
* Power Supply | PWS-2K05A-1R | 2 | 1U 2000W Redundant Titanium Power Supply W/PMbus 73.5x40x265mm,RoHS/REACH | |
* Power Distributor | PDB-PT946S-824 | 1 | standard 24pin output | |
* Cable 9 | CBL-0087 | 1 | CBL,FRONT CNTL,16 TO 16 PIN,Ribbon,50CM | |
* Cable 10 | CBL-0160L | 2 | NEMA5-15P to C13 US power cord 16AWG 6ft, PBF (default for high watt) | |
* Cable 11 | CBL-0303L | 1 | 4 pin to 4 pin power cable, S-RA, 40CM. 20AWG | |
* Cable 12 | CBL-0459L | 2 | LATCH CLAMP,AC POWER CORD | |
* Cable 13 | CBL-0481L | 2 | SATA,INT,ROUND,ST-ST,81CM,30AWG | |
* Cable 14 | CBL-CDAT-0841 | 1 | 8 pin to 8 pin round SGPIO cable, 81cm, 28AWG, pinout 1-1 | |
* FAN 1 | FAN-0184L4 | 5 | 80x80x38 mm, 14.4K RPM, Rear Exhaust Fan for SC946S Chassis (60-bay) | |
* Front Panel | FPB-FP829H | 1 | Front Control Board for SC829H chassis | |
* Drive Tray(s) | MCP-220-00117-0B | 2 | Black gen-3 hot-swap tool-less 2.5- inch HDD tray | |
* Drive Tray(s) | MCP-220-94601-0N | 60 | SC946ED 3.5\" / 2.5\" tool-less HDD tray | |
* Rail Set | MCP-290-00137-0N | 1 | Rail set, Auto-latch, quick/quick, default 4U 17.2";W |
Note:
• Parts with * are inside the chassis
• Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
NVME kit (Full kit needed) | AOC-SLG3-2E4R-O | 1 | NVMe AOC | |||
NVME kit (Full kit needed) | MCP-220-94607-0N | $ 182.50 | 1 | SC946S NVMe kits w/ cage, tray, cable, BPN (no NVMe cable)OCuLink v.91,INT,PCIe NVMe SSD, 55CM,34AWG | ||
NVME kit (Full kit needed) | CBL-SAST-0818 | $ 36.00 | 4 | 55cm OCuLink to OCuLink Cable | ||
NVME kit (Full kit needed) | CBL-SAST-0850 | $ 56.50 | 2 | OCuLink to MiniSAS HD V.91, INT, PCIe NVMe SSD, 37CM, 15D15F7D, 34AWG | ||
Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) | |||
SIOM Network Card(s) | AOC-MGP-I2 | $ 75.00 | 0 | SIOM 2-port GbE, Intel i350-AM2 | ||
SIOM Network Card(s) | AOC-MGP-I4 | $ 98.50 | 0 | SIOM 4-port GbE, Intel i350-AM4 | ||
SIOM Network Card(s) | AOC-MTG-I2T | $ 236.00 | 0 | SIOM 2-port 10GBase-T, Intel X550 | ||
SIOM Network Card(s) | AOC-MTG-I4T | $ 406.50 | 0 | SIOM 4-port 10GBase-T, Intel X550 | ||
SIOM Network Card(s) | AOC-MTGN-I2S | $ 226.00 | 0 | SIOM 2-port 10G SFP+, Intel 82599ES | ||
SIOM Network Card(s) | AOC-MTG-I4S | $ 226.50 | 0 | SIOM 4-port 10G SFP+, Intel XL710 |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |