Motherboard |
Motherboard | Super X11DSC+ |
System Memory |
Memory Capacity | 24 DIMM slots |
| Up to 6TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM |
| Supports Intel® Optane™ DCPMM †† |
Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. |
On-Board Devices |
Chipset | Intel® C621 chipset |
SAS | SAS3 (12Gbps) via Broadcom 3008; IT Mode |
SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10, 50 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Video | ASPEED AST2500 BMC |
Input / Output |
Serial ATA | 8 SATA3 (6Gbps) ports |
LAN | 1 RJ45 Dedicated IPMI LAN port |
USB | 2 USB 3.0 ports (rear) |
| 1 Type A |
Video | 1 VGA D-Sub connector port |
Serial Port / Header | 1 Fast UART 16550 port / 1 Header |
System BIOS |
BIOS Type | AMI UEFI |
Management |
Software | NMI |
| Watchdog |
| KVM with dedicated LAN |
| SuperDoctor® 5 |
| Intel® Node Manager |
| IPMI 2.0 |
| SSM , SPM , SUM |
PC Health Monitoring |
CPU | 4+1 Phase-switching voltage regulator |
| Monitors for CPU Cores, Chipset Voltages, Memory. |
FAN | Status monitor for speed control |
| Pulse Width Modulated (PWM) fan connectors |
| Fans with tachometer monitoring |
Temperature | Monitoring for CPU and chassis environment |
| Thermal Control for fan connectors |
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-226STS-R1K62P1 |
Dimensions |
Width | 17.2" (437mm) |
Height | 3.5" (89mm) |
Depth | 30.2" (767mm) |
| Cable Management Arm installed: 35.2" (895mm) |
Gross Weight | 65 lbs (29.5 kg) |
Available Colors | Black |
Front Panel |
Buttons | Power On/Off button |
| System Reset button |
LEDs | System Information LED |
| Network activity LEDs |
| Hard drive activity LED |
| Power status LED |
| Power fail LED |
Expansion Slots |
PCI-Express | 2 PCI-E 3.0 x16 slots |
| 1 PCI-E 3.0 x8 slot |
| 1 SIOM card support (must bundle with network card) |
Drive Bays |
Hot-swap | 48 Hot-swap 2.5" SAS3/SATA3 drive bays |
| 2 Hot-swap 2.5" SATA3 drive bays (rear) |
Backplane |
Backplane | SAS3 12Gb/s direct attached storage backplane, w/ 24x SAS3 2.5" drive slots |
System Cooling |
Fans | 5x 8cm high-performance PWM fans |
Power Supply |
Power Supply | 1600W Redundant Power Supplies with PMBus |
Total Output Power | 1600W/1000W |
Dimension (W x H x L) | 73.5 x 40 x 203 mm |
Input | 100-127Vac / 13 - 9A / 50-60Hz |
| 200-240Vac / 10 - 8A / 50-60Hz |
+12V | Max: 83.3A / Min: 0A (100-127Vac) |
| Max: 133A / Min: 0A (200-240Vac) |
12Vsb | Max: 2.1A / Min: 0A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | Titanium Level |
Operating Environment |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) |
Processor |
CPU | Dual Socket P (LGA 3647) |
| 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , 3 UPI up to 10.4GT/s |
| Support CPU TDP 70-165W |
Cores | Up to 28 Cores |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) |
Product SKUs |
Product SKUs | SuperStorage 2029P-E1CR48L (Black) |