Product SKUs |
AS -1123US-TN10RT | A+ Server 1123US-TN10RT |
Motherboard |
Motherboard | H11DSU-iN |
Processor/Chipset |
CPU | Dual AMD EPYC™ 7001/7002 * series Processors ( * Board revision 2.x required ) |
| Socket SP3 |
| Supports CPU cTDP up to 280W ** |
Cores | Up to 32 Cores (Board revision 1.x + 7001 Processors) |
| Up to 64 Cores (Board revision 2.x + 7002 Processors) |
Chipset | System on Chip (SoC) |
Note | ** Certain CPUs with high TDP higher than 225W may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization |
System Memory |
Memory Capacity | 8-channel memory bus |
| 32 DIMM slots |
| Supports up to 4TB Registered ECC DDR4 2666MHz SDRAM (7001 Processors) |
| Supports up to 8TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required + 7002 Processors) |
Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs (7001 Processors) |
| DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required + 7002 Processors) |
DIMM Sizes | 4GB, 8GB, 16GB, 32GB, 64GB, 128GB, 256GB * ( * Board revision 2.x required + 7002 Processors ) |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors |
| Detects double-bit errors (using ECC memory) |
On-Board Devices |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| ASPEED AST2500 BMC |
Network Controllers | Intel® X540 Controller |
VGA | ASPEED AST2500 BMC |
Expansion Slots |
1U | 1 PCI-E 3.0 x16 (FH, 9.5"L) slot |
| 1 PCI-E 3.0 x8 (LP) slot |
M.2 | 1 M.2 PCI-E 3.0 x4 M-Key NVMe (2240/2260/2280/22110) |
| or 1 M.2 M-Key SATA3 via optional cable CBL-SAST-0639 (2240/2260/2280/22110) |
| or 2 Internal M.2 slots via optional cable CBL-SAST-0639 (NVMe 2260 + SATA 2260) |
Input / Output |
NVMe | 10 U.2 NVMe support |
LAN | 1 RJ45 Dedicated IPMI LAN port |
| 2x 10GbBase-T LAN ports |
USB | 5 USB 3.0 ports (2 rear + 2 front + 1 Type A) |
VGA | 2 VGA ports (1 rear, 1 onboard) |
Others | TPM 1.2 header |
| 1 COM port |
| 2 SATA DOM power connectors |
System BIOS |
BIOS Type | AMI 128Mb SPI Flash EEPROM |
BIOS Features | Plug and Play (PnP) |
| PCI 2.2 |
| DMI 2.3 |
| ACPI 5.1 |
| USB Keyboard Support |
| SMBIOS 3.1.1 |
Chassis |
Form Factor | 1U |
Model | CSE-119UTS-R1K02P-N10T |
Dimensions and Weight |
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 27.82" (707mm) |
Package | 8.19" (H) 23.86" (W) 36.14" (D) |
Weight | Net Weight: 26 lbs (11.8 kg) |
| Gross Weight: 41 lbs (18.6 kg) |
Front Panel |
Buttons | Power On/Off button |
| System Reset button |
LEDs | Power LED |
| Hard drive activity LED |
| System Overheat LED / Fan fail LED / UID LED |
| 2x Network activity LEDs |
Drive Bays |
Hot-swap | 10 hot-swap 2.5" U.2 NVMe drive bays |
System Cooling |
Fans | 8 heavy-duty PWM fans with optimal fan speed control |
Air Shroud | 1 Air Shroud |
Power Supply |
Power Supply | 1000W Redundant Power Supplies with PMBus |
Total Output Power | 800W/1000W |
Dimension (W x H x L) | 73.5 x 40 x 203 mm |
Input | 100-127Vac / 9.8 - 7A / 50-60Hz |
| 200-240Vac / 7 - 5A / 50-60Hz |
| 200-240Vdc / 7 - 5A (for CCC only) |
+12V | Max: 66.7A / Min: 0A (100-127Vac) |
| Max: 83A / Min: 0A (200-240Vac) |
| Max: 83A / Min: 0A (200-240Vdc) |
12Vsb | Max: 2.1A / Min: 0A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | Titanium Level |
PC Health Monitoring |
CPU | Monitors CPU Core Voltages, +12V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT |
| CPU switching voltage regulator |
FAN | Status monitor for speed control |
| Pulse Width Modulated (PWM) fan connectors |
| Up to 8-fan status tachometer monitoring |
| Up to eight 4-pin fan headers |
Temperature | Monitoring for CPU and chassis environment |
| CPU Thermal Trip Support |
| Thermal control for 8x Fan connectors |
| I²C Temperature Sensing Logic |
LED | CPU / System Overheat LED |
Other Features | Chassis Intrusion Detection |
| Chassis Intrusion Header |
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |