- Products
- Data Center Optimized Applications, Value IaaS
- Supermicro SYS-F619P3-FT Twin Barebone Dual CPU, 8-Node
Supermicro SYS-F619P3-FT Twin Barebone Dual CPU, 8-Node
• Compute Intensive Applications
• Data Center, HPC and Enterprise Applications
• Hyperscale, Hyperconverged
• 4U 8 node system, each node:
Barebone 4U Rackmount FatTwin with 8 Nodes - Each Node supports: Dual Intel Xeon Scalable Processors 2nd Generation and Intel Xeon Scalable Processors, up to 3TB ECC 3DS 2933MHz RDIMM/LRDIMM Supports Intel Optane DCPMM memory, 2 Hot-Swap 3.5in SATA3, SIOM Network Card, 1 dedicated IPMI LAN port, 2200W Redundant Power Supply - (CSE-F418IF3-R2K20BP + X11DPFF-SN) - Black
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM ††
3. 1 PCI-E 3.0 x16, 1 PCI-E 3.0 x8 (LP), 1 PCI-E 3.0 x16 (for SIOM )
4. 2 Fixed 3.5" SATA3 drive bays M.2 Interface: 2 SATA/PCI-E 3.0 x4, RAID 0 and 1 M.2 Form Factor: 2260, 2280, 22110 M.2 Key: M-Key
5. Dual GbE ports via SIOM Network card, 1 dedicated IPMI LAN port (front)
6. 1 VGA, 2 USB 3.0 ports (front)
7. 8x 8cm 13.5k RPM rear fans per enclosure
8. 2200W Redundant Power Supplies Titanium Level (96% Efficiency)
Extra Specifications for Supermicro SYS-F619P3-FT Twin Barebone Dual CPU, 8-Node
| Motherboard | ||
| Motherboard | Super X11DPFF-SN | |
| Processor (per Node) | ||
| CPU | Dual Socket P (LGA 3647) | |
| 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s | ||
| Support CPU TDP 70-165W with IVR | ||
| Cores | Up to 28 Cores | |
| Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R). Extended thermal solutions may be required to support CPUs higher than 165W TDP, please contact Supermicro Technical Support for additional information. | |
| System Memory (per Node) | ||
| Memory Capacity | Supports Intel® Optane™ DCPMM †† | |
| 12 DIMM slots | ||
| Up to 3TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
| Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
| Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
| On-Board Devices | ||
| Chipset | Intel® C621 chipset | |
| SATA | SATA3 (6Gbps); RAID 0, 1, 5, 10 | |
| Network Controllers | Flexible networking via SIOM | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| Graphics | ASPEED AST2500 BMC | |
| Input / Output (per node) | ||
| LAN | SIOM flexible Network card | |
| 1 RJ45 Dedicated IPMI LAN port (front) | ||
| USB | 2 USB 3.0 ports (front) | |
| VGA | 1 VGA port (front) | |
| System BIOS | ||
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | |
| Management | ||
| Software | Watch Dog | |
| KVM with dedicated LAN | ||
| SuperDoctor® 5 | ||
| Intel® Node Manager | ||
| IPMI 2.0 | ||
| Power Configurations | ACPI Power Management | |
| PC Health Monitoring | ||
| CPU | 4+1 Phase-switching voltage regulator | |
| Monitors for CPU Cores, Chipset Voltages, Memory. | ||
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| Fans with tachometer monitoring | ||
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | ||
| Chassis | ||
| Form Factor | 4U Rackmount | |
| Model | CSE-F418IF3-R2K20BP | |
| Dimensions and Weight | ||
| Width | 17.63" (448mm) | |
| Height | 6.96" (177mm) | |
| Depth | 29" (737mm) | |
| Package | 28.3" (W) x 15.0" (H) x 42.4" (D) | |
| Weight | Net Weight: 150 lbs (68.04 kg) | |
| Gross Weight: 200 lbs (90.71 kg) | ||
| Available Colors | Black | |
| Front Panel | ||
| Buttons | Power On/Off button | |
| UID button | ||
| LEDs | Network activity LEDs | |
| Power status LED | ||
| Information LED (Fan failure, Overheat) | ||
| Expansion Slots (per node) | ||
| PCI-Express | 1 PCI-E 3.0 x16 (SIOM) | |
| 1 PCI-E 3.0 x8 (Low-profile) | ||
| 1 PCI-E 3.0 x16 (Low-profile) | ||
| Drive Bays (per node) | ||
| Fixed | 2 Fixed 3.5" SATA3 drive bays | |
| M.2 | M.2 Interface: 2 SATA/PCI-E 3.0 x4, RAID 0 & 1 | |
| M.2 Form Factor: 2260, 2280, 22110 | ||
| M.2 Key: M-Key | ||
| System Cooling | ||
| Fans | 8x 8cm 13.5k RPM rear fans per enclosure | |
| Power Supply | ||
| Power Supply | 2200W Redundant Power Supplies with PMBus | |
| Total Output Power and Input | 1200W with Input 100-127Vac | |
| 1800W with Input 200-220Vac | ||
| 1980W with Input 220-230Vac | ||
| 2090W with Input 230-240Vac | ||
| 2200W with Input 220-240Vac (for UL/cUL use only) | ||
| 2090W with Input 230-240Vdc (for CCC only) | ||
| AC Input Frequency | 50-60Hz | |
| Dimension (W x H x L) | 76 x 40 x 336 mm | |
| +12V | Max: 150A / Min: 0A (200-220Vac) | |
| Max: 165A / Min: 0A (220-230Vac) | ||
| Max: 100A / Min: 0A (100-127Vac) | ||
| Max: 174.17A / Min: 0A (230-240Vac) | ||
| Max: 183.3A / Min: 0A (220-240Vac) | ||
| 5VSB | Max: 1A / Min: 0A | |
| Output Type | Backplanes (gold finger) | |
| Certification | Titanium Level | |
| Operating Environment | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
| Operating Relative Humidity: 8% to 90% (non-condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
| Product SKUs | ||
| Product SKUs | SuperServer F619P3-FT (Black) | |
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-X11DPFF-SN | 8 | Super X11DPFF-SN Motherboard | |
| Motherboard / Chassis | CSE-F418IF3-R2K20BP | 1 | 4U Chassis | |
| Backplane | BPN-ADP-X11DPFF | 8 | Power adapter card for X11DPFF,RoHS | |
| Cable 1 | CBL-CDAT-0910 | 8 | CBL,SGPIO,2X5F TO 2X5F,P2.54, 14CM, 24AWG,RoHS | |
| Cable 2 | CBL-PWCD-0578 | 4 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG | |
| Cable 3 | CBL-PWEX-1020-11 | 16 | PWEX,2X4F/P4.2 TO 2X4F/P4.2,10.5CM,16AWG,RoHS | |
| Cable 4 | CBL-SAST-0672 | 8 | MINI SAS HD-SAS 29PX2+2x4P,INT,46/56/41/52CM,22/30AWG,RoHS | |
| Drive Tray(s) | MCP-220-00134-0N | 16 | Tool-less 3.5 | |
| Riser Card | RSC-P-6 | 8 | RSC-P-6 (1U LHS TwinPro RSC with 1 PCI-Ex16),RoHS | |
| Riser Card | RSC-R1UF-E16R | 8 | RSC-R1UF-E16R | |
| Heatsink / Retention | SNK-P0067PS | 8 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
| Heatsink / Retention | SNK-P0067PSC | 8 | 1U Passive CPU Heat Sink with a 17-mm Wide Side Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
| * Power Supply | PWS-2K04A-1R | 4 | AC-DC 2000W, Titanium Level, Redundancy, 1U, PMBus 1.2, +12V/+5Vsb, 360x76x40mm,HF,RoHS/REACH | |
| * Power Supply | PWS-2K20A-1R | 4 | 1U 2200W Redundant, Titanium, 76(W) X 40(H) X 336(L) mm | |
| * Backplane | BPN-PDB-X11DPFF | 2 | Power Middleplane for X11 FIO Fattwin,RoHS | |
| * Rail Set | MCP-290-41803-0N | 1 | Fat twin F418 / F424 Static Rail set support 28-33.5 inch depth rail,RoHS/REACH,PBF |
Note:
• Parts with * are inside the chassis
• Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| Connect 1x 2.5" NVMe Drive | CBL-SAST-0950 | $ 59.00 | 1/node | 2x OcuLink v 1.0 to 2x PCIe SFF-8639 w/ Power, 35/57CM, 32/24/20 AWG | ||
| RAID Card | AOC-S3108L-H8IR-16DD | $ 485.50 | 0 | LSI 3108 8 int 12Gb/s ports, 8xGen3, ROC - LP,16 HDD | ||
| Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |