- Products
- BY APPLICATION (new)
- Supermicro SSG-631E-E1CR16L Storage 3U Barebone Dual Intel Xeon Scalable Processors 5th and 4th Generation
Supermicro SSG-631E-E1CR16L Storage 3U Barebone Dual Intel Xeon Scalable Processors 5th and 4th Generation
• Enterprise Server
• iSCSI SAN
• HPC, Data Center
• Database Processing & Storage
• Corporate Database
• Appliance Optimized Storage Building Blocks
Barebone 3U Rackmount SuperServer, Supports Dual Socket E (LGA-4677), Supporting Intel Xeon Scalable Processors 5th and 4th Generation, Intel C741 Chipset, Up to 4TB in 16 DIMM slots, RDIMM, On-Board: HBA Controller Support Via Broadcom 3808, 16x 3.5in Hot-swap SATA3/SAS3 Drive Bays, 2 M.2 NVMe: M-Key, 2280 and 22110, Network Connectivity: 1 RJ45 Dedicated IPMI LAN port, Dual 10 GbE LAN Ports, 1200W/1000W Power Supply - (SSG-631E-E1CR16L + X13DEI-T)
1. Dual Socket E (LGA-4677) 5th/4th Gen Intel® Xeon® Scalable processors
2. Up to 4TB 3DS ECC RDIMM, DDR5-5600MT/s(1DPC) in 16 DIMM slots
3. 2x 10 GbE onboard via Broadcom BCM57416 1x GbE Dedicated LAN for server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
4. 16x 3.5"/2.5" Hot-swap SAS3/SATA3 drives, 2x Rear 2.5" SATA Slots, 2x NVMe M.2 (form factor: 2280 and 22110)
5. 5x 8cm hot-swap counter-rotate redundant PWM cooling fans
6. 1200W Redundant Power Supplies Titanium Level (96%)
7. HBA Controller support via Broadcom® 3808
Extra Specifications for Supermicro SSG-631E-E1CR16L Storage 3U Barebone Dual Intel Xeon Scalable Processors 5th and 4th Generation
| Product SKUs | ||
| Product SKUs | SSG-631E-E1CR16L | |
| Motherboard | ||
| Motherboard | Super X13DEI-T | |
| Processor | ||
| CPU | Dual Socket E (LGA-4677) | |
| 4th Gen Intel® Xeon® Scalable processors | ||
| Note | Supports up to 270W TDP CPUs (Air Cooled) | |
| System Memory | ||
| Memory | Memory Capacity: 16 DIMM slots | |
| Up to 4TB: 16x 256 GB DRAM | ||
| Memory Type: 4800MHz ECC DDR5 RDIMM | ||
| Memory Voltage | 1.1 V | |
| Error Detection | ECC | |
| On-Board Devices | ||
| Chipset | Intel® C741 | |
| Network Connectivity | 2x 10GbE BaseT with Broadcom BCM57416 | |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
| Input / Output | ||
| LAN | 1 RJ45 Dedicated IPMI LAN port | |
| 2 Onboard 10 GbE LAN Ports | ||
| USB | 4 USB 3.0 port(s) (4 Rear_USB) | |
| Video | 1 VGA port(s) | |
| Serial Port | 1 COM Port(s) (1 rear) | |
| DOM | 2 Super DOM (Disk on Module) port | |
| System BIOS | ||
| BIOS Type | AMI 32MB SPI Flash EEPROM | |
| Management | ||
| Software | Watch Dog | |
| NMI | ||
| SuperDoctor® 5 | ||
| IPMI 2.0 | ||
| SUM | ||
| Power Configurations | Power-on mode for AC power recovery | |
| ACPI Power Management | ||
| PC Health Monitoring | ||
| CPU | Monitors for CPU Cores, Chipset Voltages, Memory | |
| 7+1 Phase-switching voltage regulator | ||
| FAN | Status monitor for speed control | |
| Pulse Width Modulated (PWM) fan connectors | ||
| Fans with tachometer monitoring | ||
| Temperature | Monitoring for CPU and chassis environment | |
| Thermal Control for fan connectors | ||
| Chassis | ||
| Form Factor | 3U Rackmount | |
| Model | CSE-836BTS-R1K23BP2 | |
| Dimensions and Weight | ||
| Height | 5.2" | |
| Width | 17.2" | |
| Depth | 25.5" | |
| Package | 13" (H) x 27" (W) x 35" (D) | |
| Weight | Gross Weight: 79 lbs (48 kg) | |
| Available Color | Silver | |
| Front Panel | ||
| Buttons | Power On/Off | |
| LEDs | HDD activity | |
| Power status | ||
| Network activity | ||
| System information (overheat/UID) | ||
| Expansion Slots | ||
| PCI-Express (PCIe) | 3 PCIe 5.0 x16 slot(s) | |
| 1 PCIe 5.0 x8 slot(s) | ||
| Note | PCIe slot 1 & 2 are occupied by the Storage Controller/JBOD Expansion Module | |
| Drive Bays / Storage | ||
| Hot-swap | 16x 3.5" hot-swap SATA3/SAS3 drive bays | |
| M.2 | 2 M.2 NVMe | |
| M-Key, 2280 and 22110 | ||
| System Cooling | ||
| Fans | 5x 8cm heavy duty fans with optimal fan speed control | |
| Air Shroud | 1 Air Shroud(s) | |
| Power Supply | ||
| Dimension (W x H x L) | 76 x 40 x 336 mm | |
| AC Input | 1000W: 100-127Vac / 15A-12A / 50-60Hz | |
| 1200W: 200-240Vac / 8.5A-7A / 50-60Hz | ||
| +12V | Max: 83A / Min: 0A (100Vac-127Vac) | |
| Max: 100A / Min: 0A (200Vac-240Vac) | ||
| 5V SB | Max: 4A / Min: 0A | |
| Output Type | 19 Pairs Gold Finger Connector | |
| Certification | Titanium Level | |
| Operating Environment | ||
| RoHS | RoHS Compliant | |
| Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
| Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
| Operating Relative Humidity: 8% to 90% (Non-Condensing) | ||
| Non-operating Relative Humidity: 5% to 95% (Non-Condensing) | ||
| Name | Part Number | Qty. | Description | |
|---|---|---|---|---|
| Motherboard / Chassis | MBD-X13DEI-T | 1 | Super X13DEI-T Motherboard | |
| Motherboard / Chassis | CSE-836BTS-R1K23BP2 | 1 | 3U Chassis | |
| Add-on Card / Module | AOC-S3808L-L8IT-P | 1 | 8 int 12Gb/s SAS3 ports, x8 Gen4, HBA - LP,122HDDw/exp,R | |
| Add-on Card / Module | AOM-SAS3-8I8E | 1 | 8-port Mini SAS HD Int-to-Ext Cable Adapter w/FH Bracket | |
| Backplane | BPN-SAS3-836EL1 | 1 | (EOL)SAS3 12Gb/s Single Expander backplane with 16 SAS3 3.5" | |
| Cable | CBL-SAST-0532 | 2 | Internal Mini-SAS HD to Mini-SAS HD 50cm,30AWG,12Gb/s | |
| Cable | CBL-SAST-1264-100 | 1 | Slimline x8 (STR) to 2x MiniSAS HD x4,65CM,100 OHM,RoHS | |
| Cable | CBL-0071L | 1 | ROUND 16 TO 16 PIN RIBBON FP CABLE 30"L, LF | |
| Cable | CBL-PWEX-1069 | 1 | PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,30CM,22AWG,5A/pin,RoHS | |
| Cable | CBL-PWEX-1078 | 4 | PWEX,FAN,1X4/P2.5 TO 1X4/P2.54,20CM,22AWG,5A/PIN,RoHS | |
| Parts | MCP-260-00042-3N | 1 | STD I/O shield for X13 server MB with venting holes | |
| Parts | MCP-290-83601-0V | 1 set | Silver chassis handles (left and right) for SC836/835 | |
| Front Panel | MCP-280-00033-0N | 1 | Universal Thermal sensor kit with 80cm I2C cable | |
| Front Panel | FPB-FP836-D | 1 | Front control board Dual color LED(FP836-D)forSC823M,825,825 | |
| Air Shroud | MCP-310-83601-0B | 1 | Mylar air block for SC836(X11DPH-T),RoHS | |
| Air Shroud | MCP-310-83602-0B | 1 | Mylar air shroud for SC836(X13DEI-T) | |
| Air Shroud | MCP-310-39001-0N | 1 | SC835/836/936 Intel DP X9-X10 PC air shroud 1368x13/12x13MB | |
| Software | SFT-OOB-LIC | 1 | License key for enabling OOB BIOS management | |
| Heatsink / Retention | SNK-P0088P | 2 | 2U Passive CPU HS for X13 EGS and X14-SP BHS-SP Systems | |
| *Power Supply | PWS-1K23A-1R | 2 | AC-DC 1200W, Titanium Level, Redundancy, 1U, PMBUS 1.2, +12V/+5Vsb, 336x76x40 mm,HF,RoHS/REACH | |
| *Power Distributor | PDB-PT826-8824 | 1 | PDB with longer 24pin for SC826B | |
| *Fan | FAN-0206L4 | 3 | 80x80x38 mm, 13.5K RPM, Middle Cooling Fan for 2U and above Servers | |
| *Fan | FAN-0212L4 | 2 | 80x80x32 mm, 9.7K RPM Rear Exhaust Fan for SC836B and SC846B | |
| *Drive Tray(s) | MCP-220-00023-01 | 1 | Black USB dummy tray support 1x 2.5" slim HDD for SC825, 836 | |
| *Drive Tray(s) | MCP-220-00075-0B | 16 | Black gen 5.5 hot-swap 3.5" HDD tray | |
| *Rear Window | MCP-240-83605-0N | 1 | 836B chassis rear window (to support the optional MCP-220-83605-0N) | |
| *Peripheral Drive | MCP-290-00007-01 | 1 | Black DVD dummy cover for SC825, 836 | |
| *Rail Set | MCP-290-00053-0N | 1 | Rail set, quick/quick, default for 2,3U 17.2"W | |
| *Rail Set | MCP-410-00007-0N | 1 | Rail screw bag |
Note:
• Parts with * are inside the chassis
• Excessive parts might not be shipped, including but not limited to excessive drive trays, fans, riser brackets, air shrouds, IO shields, cables.....etc.
| Name | Part Number | Price | Add to Cart | Qty. | Description | |
|---|---|---|---|---|---|---|
| Cable Management Arm | MCP-290-00073-0N • | 1 | Supermicro Cable Management Arm | |||
| Converter Tray | MCP-220-00043-0N • | 1 | 2.5" HDD TRAY IN 4TH GENERATION 3.5" HOT SWAP TRAY | |||
| DVD Drive | MCP-220-81502-0N • | 1 | Slim SATA DVD mounting kit | |||
| DVD Drive | CBL-SAST-1251-100 | $ 26.00 | 1 | Slimline x8 (STR) to 4x SATA,60/50/50/60CM,SB 5CM,100 OH | ||
| DVD Drive | DVM-TEAC-DVDRW-SBT5 | $ 101.00 | 1 | BLACK TEAC SLIM DVD-RW SATA DRIVE,HF,RoHS | ||
| Front USB3.0 & COM Ports Tray | MCP-220-00129-0B | 1 | Black 2x USB3.0/COM port tray in slim FDD bay, with both side of rails/brackets | |||
| Network Cards | AOC-STGS-i2T-O | 1 | Std LP 2-port 10G RJ45, Intel X550 | |||
| Network Cards | AOC-STG-b2T-O | 1 | Standard LP 2-port 10Gbase-T, Broadcom 57416,HF,RoHS | |||
| Network Cards | AOC-S25G-m2S-O | 1 | Std LP 2-port 25G SFP28, Mellanox ConnectX-4 LX EN | |||
| Network Cards | AOC-S25G-i2S-O | 1 | Std. Low Profile 25G dual port SFP28, based on Intel XXV710 | |||
| Network Cards | AOC-S25G-b2S-O | 1 | Std LP 2-port 25G SFP28, Broadcom BCM57414 | |||
| Power Cord | CBL-PWCD-0300-IS | $ 20.00 | 1 | PWCD,US,IEC60320 C14 TO C13,6FT,18AWG,RoHS/REACH | ||
| Power Cord | CBL-PWCD-0579 | $ 23.00 | 1 | Power Cord Type IEC (C14 to C13) 6 ft (14AWG), 15A, 250V | ||
| Power Cord | CBL-PWCD-0579-1 | $ 23.00 | 1 | Power Cord Type IEC (C14 to C13) 6 ft (14AWG), 15A, 250V | ||
| TPM | AOM-TPM-9670V-O | 1 | TPM 2.0, vertical form factor, provisioned for server | |||
| VROC | AOC-VROCSTNMOD | $ 176.00 | 1 | Intel VROC HW key (RSTe) standard upgrade module,HF,RoHS | ||
| VROC | AOC-VROCPREMOD | $ 344.50 | 1 | Intel VROC Premium, RAID0,1,5,10,HF,RoHS |
| Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
| Coverage: | Replacement or repair |
| Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
| E-mail: | returnservices@wiredzone.com |
| If you need Technical Support for this item please contact: | |
| Provider: | Supermicro |
| Type of Support: | FULL |
| Phone No.: | 408-503-8000 |
| URL: | Click here for Manufacturer Website |