Motherboard (Two per System) |
Motherboard (Two per System) | Super X10DSN-TS |
Processor/Cache (per Node) |
CPU | Intel® Xeon® processor E5-2600 v4 † / v3 family (up to 145W TDP) * |
| Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to 22 Cores † / Up to 55MB † Cache |
System Bus | QPI up to 9.6 GT/s |
Note | † BIOS version 2.0 or above is required |
| * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory (per Node) |
Memory Capacity | 16x 288-pin DDR4 DIMM slots |
| Up to 2TB † ECC 3DS LRDIMM, 512GB ECC RDIMM |
Memory Type | 2400 † /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | LRDIMM: 64GB, 32GB |
| 3DS LRDIMM: 128GB |
| RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
On-Board Devices (per Node) |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps); RAID 0, 1 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
| ASPEED AST2400 BMC |
Network Controllers | Virtual Machine Device Queues reduce I/O overhead |
| 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Intel® X540 Dual Port 10GBase-T |
| 10Gb private ethernet between controller nodes |
| Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Video | ASPEED AST2400 BMC |
Input / Output (per Node) |
SATA | 2 SATA3 (6Gbps) ports |
LAN | 2 RJ45 10GBase-T LAN ports |
| IPMI LAN shared port |
USB | 3 USB 3.0 ports (2 rear, 1 Type A) |
Video | 1 VGA port |
Serial Port / Header | COM port via riser |
Chassis |
Form Factor | 2U Rackmount |
Model | CSE-227TS-R2K05P |
Dimensions |
Width | 17.2" (437mm) |
Height | 3.5" (89mm) |
Depth | 25.6" (650mm) |
Gross Weight | 67 lbs (30.4 kg) |
Available Colors | Black |
Front Panel |
Buttons | Power On/Off button |
LEDs | Power LED |
| Power Fail LED |
| 2 Network activity LEDs |
| Heartbeat LED |
| Overheat/Fan Fail LED |
Expansion Slots (per Node) |
PCI-Express (per node) | 1 PCI-E 3.0 x16 HHHL slot |
| 1 PCI-E 3.0 x8 HHHL slot |
| 1 SIOM slot |
Drive Bays |
Hot-swap | 20 Hot-swap 2.5" dual port NVMe drive bays |
System Cooling |
Fans | 5x 8cm high-performance PWM fans |
Power Supply |
Power Supply | 2000W Redundant Power Supplies with PMBus |
Total Output Power | 1000W: 100 – 120Vac |
| 1800W: 200 – 220Vac |
| 1980W: 220 – 230Vac |
| 2000W: 230 – 240Vac |
| 2000W: 200 – 240Vac (UL/CUL only) |
Dimension (W x H x L) | 73.5 x 40 x 265 mm |
Input | 100-120Vac / 12.5-9.5A / 50-60Hz |
| 200-220Vac / 10-9.5A / 50-60Hz |
| 220-230Vac / 10-9.8A / 50-60Hz |
| 230-240Vac / 10-9.8A / 50-60Hz |
| 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) |
+12V | Max: 83.3A / Min: 0A (100-120Vac) |
| Max: 150A / Min: 0A (200-220Vac) |
| Max: 165A / Min: 0A (220-230Vac) |
| Max: 166.7A / Min: 0A (230-240Vac) |
| Max: 166.7A / Min: 0A (200-240Vac) (UL/cUL only) |
12Vsb | Max: 2.1A / Min: 0A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | Titanium Level |
System BIOS |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | SMBIOS 2.7.1 |
| USB Keyboard support |
| Plug and Play (PnP) |
| UEFI 2.3.1 |
| PCI 2.3 |
| ACPI 1.0 / 2.0 / 3.0 / 4.0 |
Operating Environment / Compliance |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) |
| Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) |
| Operating Relative Humidity: 8% to 90% (non-condensing) |
| Non-operating Relative Humidity: 5% to 95% (non-condensing) |
Product SKUs |
Product SKUs | SuperStorage 2028R-DN2R20L (Black) |