- Products
- Supermicro H11DSi Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000
Supermicro H11DSi Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000
• Up to 5 add-on cards PCI-Express 3.0
• Dual GbE ports; IPMI w/ dedicated LAN
• Supports AMD EPYC 7000-Series Processors
• Up to 2TB ECC DDR4-2666MHz in 16 DIMM slots
Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000, up to 2TB DDR4 Reg ECC 2666MHz memory in 16 DIMM slots, 10 SATA3, 1 M.2, 2 SATADOM ports, dual Gigabit LAN ports via Intel i350-AM21, IPMI 2.0 + KVM, TPM 2.0 - MBD-H11DSi-O (Retail Box)
• 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8
• 10 SATA3, 1 M.2, 2 SATA DOM
• Dual Gigabit Ethernet LAN Ports
• 8 4-pin PWM Fan & Speed control
• ASPEED AST2500 BMC graphics
• Dual AMD EPYC 7000-Series Processors
• Up to 2 USB 3.0 ports, Up to 4 USB 2.0 ports
• 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
Extra Specifications for Supermicro H11DSi Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000
Main Specifications | ||
Device Type | Motherboard | |
Dimensions (WxDxH) | 12" x 13.05" (30.5cm x 33.1cm) | |
Form Factor | E-ATX | |
Processor | ||
Compatible Processors | Dual AMD EPYC 7000-series Processors | |
Compatible Socket | Socket SP3 | |
System Memory (per Node) | ||
Memory Sizes | 8GB, 16GB, 32GB, 64GB, 128GB | |
System Memory | ||
Error Detection | Corrects single-bit errors | |
Detects double-bit errors (using ECC memory) | ||
Memory Capacity | 8-channel memory bus | |
16 DIMM sockets | ||
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs | ||
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks | ||
Cache Memory | ||
Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs | |
Memory | ||
Supply Voltage | 1.2V | |
On-Board Devices | ||
Chipset | System on Chip | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
ASPEED AST2500 BMC | ||
Network Controllers | 1 Realtek RTL8211E PHY (dedicated IPMI) | |
2 1GbE LAN via Intel i350-AM21 | ||
USB | 2 USB 3.0 ports (rear) | |
4 USB 2.0 ports (2 rear + 2 via header) | ||
Input / Output | ||
SATA | SATA3 (6 Gbps) | |
10 SATA3 (6 Gbps) ports | ||
LAN | 2 RJ45 Gigabit Ethernet LAN ports | |
1 RJ45 Dedicated IPMI LAN port | ||
Others | 1 COM port (rear) | |
2 SATA DOM power connector | ||
1 TPM 2.0 header | ||
VGA | 1 VGA port | |
Chassis Optimized for | ||
Tower / 4U Rackmount | CSE-745BAC-R1K28B2 | |
Expansion / Connectivity | ||
Expansion Slots Total (Free) | PCI-Express: 3 PCI-E 3.0 x8 | |
PCI-Express: 2 PCI-E 3.0 x16 | ||
M.2: Interface: PCI-E 3.0 x2 | ||
Expansion Slots (per node) | ||
PCI-Express | M.2: Form Factor: 22110 | |
M.2: Support SATA devices | ||
Management | ||
Power Configurations | ACPI Power Management | |
Power-on mode control for AC power loss recovery | ||
Software | Super Doctor 5, Watch Dog, NMI, SPM, SUM, IPMI 2.0, KVM with dedicated LAN | |
PC Health Monitoring | ||
CPU | CPU switching voltage regulator | |
Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby | ||
Supports system management utility | ||
VBAT | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Up to 8-fan status tachometer monitoring | ||
Up to eight 4-pin fan headers | ||
Dual Cooling Zone | ||
LED | CPU / System Overheat LED | |
Other Features | Chassis intrusion detection | |
Chassis intrusion header | ||
UID | ||
Environmental Parameters | ||
Temperature | Monitoring for CPU and chassis environment | |
CPU thermal trip support | ||
Thermal control for 8x Fan connectors | ||
I2C Temperature Sensing Logic | ||
Operating Temperature | Operating Temperature:10C to 35C (50F to 95F) | |
Non-operating Temperature:-40C to 70C (-40F to 158F) | ||
Operating Relative Humidity:8% to 90% (non-condensing) | ||
Non-operating Relative Humidity:5% to 95% (non-condensing) | ||
System BIOS | ||
BIOS Features | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1 | |
BIOS Type | AMI 128Mb SPI Flash EEPROM | |
Parts List | ||
Motherboard | 1x MBD-H11DSI-O | |
Cables | 2x CBL-0044L, 2x CBL-0097L-03 | |
I/O Shield | 1x MCP-260-00042-0N |
Warranty: | 3 years labor, 1 year parts, 120 days advanced replacement (doa) |
Provider: | Supermicro |
Phone No.: | 305-640-0300 |
E-mail: | returnservices@wiredzone.com |
URL: | Click here for Manufacturer Website |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 120 days, 2 weeks afterward |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |