- Products
- Supermicro H11DSi-NT Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000
Supermicro H11DSi-NT Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000
M.2 Key: M-Key - Form Factor: 2280, 22110
Supports Dual AMD EPYC 7001/7002 Series Processors
Up to 4TB of ECC DDR4 3200MHz speed, 16 DIMM sockets
Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000, up to 2TB DDR4 Reg ECC 2666MHz memory in 16 DIMM slots, 10 SATA3, 1 M.2, 2 SATADOM ports, dual 10 Gigabit Base-T LAN ports, IPMI 2.0 + KVM - MBD-H11DSi-NT-O (Retail Box)
Key Features
Dual AMD EPYC 7001/7002 Series Processors (AMD EPYC 7002 series drop-in support requires board revision 2.x)
2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs, 4TB Registered ECC DDR4 3200MHz SDRAM in 16 DIMMs (Board revision 2.x required)
Expansion slots: 2 PCI-E 3.0 x16, 3 PCI-E 3.0 x8
M.2 Interface: 1 SATA/PCI-E 3.0 x2 (Platform with EPYC 7002 processor only supports PCI-E type M.2 module)
M.2 Form Factor: 2280, 22110
M.2 Key: M-key
10 SATA3, 1 M.2, 2 SATA DOM
Dual 10GBase-T LAN Ports
ASPEED AST2500 BMC graphics
Up to 2 USB 3.0 ports, Up to 4 USB 2.0 ports
8 4-pin PWM Fan & Speed control
Extra Specifications for Supermicro H11DSi-NT Motherboard E-ATX Socket SP3 Dual AMD EPYC 7000
Main Specifications | ||
Device Type | Motherboard | |
Form Factor | E-ATX | |
Dimensions (WxDxH) | 12" x 13.05" (30.5cm x 33.1cm) | |
Processor | ||
Compatible Processors | Dual AMD EPYC 7001/7002 series Processors (Board revision 2.x required) | |
Compatible Socket | Socket SP3, Up to 240W TDP | |
Cache/Core | Up to 32 Cores, Up to 64 Cores (Board revision 2.x required) | |
System Memory | ||
Memory Capacity | 16 DIMM sockets, Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM, Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required), 8-channel memory bus | |
Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs, DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required) | |
DIMM Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required) | |
Memory Voltage | 1.2V | |
Error Detection | Corrects single-bit errors, Detects double-bit errors (using ECC memory) | |
On-Board Devices | ||
Chipset | System-on-Chip | |
SATA/SAS | SATA3 (6 Gbps) | |
IPMI | Support for Intelligent Platform Management Interface v.2.0, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support, ASPEED AST2500 BMC | |
Network Controllers | Intel X550 10G Base-T Ethernet Controller, 1 Realtek RTL8211E PHY (dedicated IPMI) | |
Graphics | ASPEED AST2500 BMC | |
Input / Output | ||
SATA | 10 SATA3 (6 Gbps) ports | |
NVMe | 2 Internal NVMe Ports (PCI-E 3.0 x4) | |
LAN | 2 RJ45 10GBase-T ports, 1 RJ45 Dedicated IPMI LAN port | |
USB(s) | 2 USB 3.0 ports (rear), 4 USB 2.0 ports (2 rear + 2 via header) | |
VGA | 1 VGA port | |
Others | 1 COM port (rear), 2 SATA DOM power connectors, 1 TPM 2.0 header | |
Expansion / Connectivity | ||
Expansion Slots Total (Free) | 3 PCI-E 3.0 x8, 2 PCI-E 3.0 x16 | |
M.2 | Form Factor: 2280, 22110 | |
Key: M-key | ||
Interface: 1 SATA/PCI-E 3.0 x2 (Platform with EPYC 7002 processor only supports PCI-E type M.2 module) | ||
Chassis Optimized for | ||
2U Chassis | SC213AC-R1K23LPB, SC216BE1C4-R1K23LPB, SC825TQC-R802LPB, SC826BE1C4-R1K23LPB, SC829HE1C4-R1K62LPB | |
3U Chassis | SC836BE1C-R1K23B | |
4U Chassis | SC745BAC-R1K28B2, SC846BE1C-R1K23B | |
System BIOS | ||
BIOS Type | AMI 128Mb SPI Flash EEPROM | |
BIOS Features | Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 5.1, USB Keyboard Support, SMBIOS 3.1.1 | |
Management | ||
Software | Super Doctor 5, Watch Dog, NMI, SUM, IPMI 2.0, KVM with dedicated LAN | |
Power Configurations | ACPI Power Management, Power-on mode control for AC power loss recovery | |
PC Health Monitoring | ||
CPU | Monitors CPU Core Voltages, +1.1V, +1.5V, +1.8V, +12V, +5V, +5V standby, CPU switching voltage regulator | |
FAN | Up to 8-fan status tachometer monitoring, Up to eight 4-pin fan headers, Dual Cooling Zone, Status monitor for speed control, Pulse Width Modulated (PWM) fan connectors | |
Temperature | Monitoring for CPU and chassis environment, CPU Thermal Trip Support, Thermal control for 8x Fan connectors, I2C Temperature Sensing Logic | |
LED | CPU / System Overheat LED | |
Other Features | Chassis Intrusion Detection, Chassis Intrusion Header, UID | |
Environmental | ||
Operating Environment | Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Operating Temperature: 10°C to 35°C (50°F to 95°F) |
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
I/O Cable | CBL-0097L-03 | $ 18.00 | 2 | Ipass to 4 SATA, 51cm, W/51cm SB, S, 30AWG | ||
TPM security module | AOM-TPM-9655V | $ 39.00 | 0 | TPM 1.2 module with Infineon 9655, RoHS/REACH,PBF; | ||
TPM security module | AOM-TPM-9665V | $ 39.00 | 0 | TPM 2.0 module with Infineon 9665, RoHS/REACH,PBF; |
Warranty: | 3 years labor, 1 year parts, 120 days advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 120 days, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |