- Products
- Rackmount & Tower
- Supermicro SYS-2049U-TR4 2U Barebone Quad Intel Processor
Supermicro SYS-2049U-TR4 2U Barebone Quad Intel Processor
• 48 DDR4 DIMM Slots, up to 6TB
• Up to 11 PCI-E 3.0 slots
• 4 Hot-Swap NVMe Bays support
• via optional NVMe AOC
• Flexible Connectivity Options
Barebone 2U Rackmount SuperServer, Quad Intel Xeon Scalable Processors Gen. 2, Intel C621 chipset, Up to 12TB DDR4 ECC 2933MHz memory, 24 SAS3 ports support via optional Add-on Cards, 24 Hot-swap 2.5in drive bays 4 Gigabit Ethernet ports, Redundant 1600W Power Supply (CSE-218UTS-R1K62P + MBD-X11QPH+) - (with minimum 4 CPUs, 4 DIMMs and 1 HDD recommended)
1. Quad Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 48 DIMMs; up to 12TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM ††
3. 5 PCI-E 3.0 x8 slots, 6 PCI-E 3.0 x16 slots
4. 4 GbE LAN ports via AOC-2UR66-i4G 1 dedicated IPMI LAN port
5. 24 Hot-swap 2.5" SAS3/SATA3 drive bays supported via optional Add-on RAID controller card; 4 Hybrid ports with NVMe support via extra AOC
6. Optional up to 2 Active Cooling GPUs
7. 4x 8cm heavy duty fans
8. 1600W Redundant Power Supplies Titanium Level (96%)
Extra Specifications for Supermicro SYS-2049U-TR4 2U Barebone Quad Intel Processor
Motherboard | ||
Motherboard | Super X11QPH+ | |
System Memory | ||
Memory Capacity | 48 DIMM slots | |
Supports Intel® Optane™ DCPMM †† | ||
Up to 12TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
Memory Type | 2933 † /2666MHz ECC DDR4 RDIMM/LRDIMM | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
On-Board Devices | ||
Chipset | Intel® C621 chipset | |
SATA | SATA3 via Intel C621; RAID 0, 1, 5, 10 | |
Network Connectivity | 4 Gigabit Ethernet ports via AOC-2UR66-i4G; Other options | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Graphics | ASPEED AST2500 BMC | |
Input / Output | ||
SATA | 12 SATA3 (6Gbps) ports | |
SAS | 24 SAS3 ports support via optional Add-on Cards | |
NVMe | 4 Hybrid ports with NVMe support via AOC | |
LAN | 1 RJ45 Dedicated IPMI LAN port | |
4 RJ45 GbE LAN ports | ||
USB | 2 USB 3.0 ports (rear) | |
Video | 1 VGA Connector | |
Serial Port / Header | 1 COM port (rear) | |
DOM | 2 Super DOM (Disk on Module) ports | |
System BIOS | ||
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | |
Management | ||
Software | Watch Dog | |
NMI | ||
SuperDoctor® 5 | ||
IPMI 2.0 | ||
SUM | ||
Power Configurations | Power-on mode for AC power recovery | |
ACPI Power Management | ||
PC Health Monitoring | ||
CPU | 4+1 Phase-switching voltage regulator | |
Monitors for CPU Cores, Chipset Voltages, Memory. | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Fans with tachometer monitoring | ||
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | ||
Chassis | ||
Form Factor | 2U Rackmount | |
Model | CSE-218UTS-R1K62P | |
Dimensions and Weight | ||
Width | 17.2" (437mm) | |
Height | 3.5" (89mm) | |
Depth | 30.7" (780mm) | |
Weight | Net Weight: 43 lbs (19.4 kg) | |
Gross Weight: 69 lbs (31.2 kg) | ||
Available Colors | Black | |
Front Panel | ||
Buttons | Power On/Off button | |
System Reset button | ||
LEDs | Network activity LEDs | |
Power status LED | ||
HDD activity LED | ||
System information (overheat/UID) LED | ||
Expansion Slots | ||
PCI-Express | 5 PCI-E 3.0 x8 slots | |
6 PCI-E 3.0 x16 slots (4 CPUs need to be installed for full access to PCI-E slots and onboard controllers. See AOC Support for details.) | ||
Drive Bays | ||
Hot-swap | 24 Hot-swap 2.5" SAS3/SATA3 drive bays | |
Optional 24 SAS3 ports via AOC | ||
Optional 20 SAS3 ports via AOC + 4 NVMe ports via AOC | ||
System Cooling | ||
Fans | 4x 8cm heavy duty PWM fans | |
Power Supply | ||
Power Supply | 1600W Redundant Power Supplies with PMBus | |
Total Output Power | 1600W/*1000W | |
Dimension (W x H x L) | 73.5 x 40 x 203 mm | |
Input | 200-240Vac / 10 - 8A / 50-60Hz | |
*100-127Vac / 13 - 9A / 50-60Hz | ||
+12V | Max: 83.3A / Min: 0A (100-127Vac) | |
Max: 133A / Min: 0A (200-240Vac) | ||
12Vsb | Max: 2.1A / Min: 0A | |
Output Type | 25 Pairs Gold Finger Connector | |
Certification | Titanium Level | |
* Supported with certain configuration and operating temperature limitations. | ||
Operating Environment | ||
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
Processor | ||
CPU | 2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , 3 UPI up to 10.4GT/s | |
Quad Socket P (LGA 3647) | ||
Support CPU TDP 70-165W with IVR, 205W supported with optional kit | ||
Cores | Up to 28 Cores | |
Note | ‡ BIOS version 3.0 or above is required to support 2nd Gen Intel® Xeon® Scalable processors | |
Product SKUs | ||
Product SKUs | SuperServer 2049U-TR4 (Black) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-X11QPH+ | 1 | Super X11QPH+ Motherboard | |
Motherboard / Chassis | CSE-218UTS-R1K62P | 1 | 2U Chassis | |
Add-on Card / Module | AOC-2UR66-I4G | 1 | 2U Ultra Riser with 4 GbE ports and 2 PCI-E x16 3.0, Intel i350 | |
Backplane | BPN-SAS3-216A-N4 | 1 | 24-port 2U SAS3 12Gbps hybrid backplane, support up to 20x 2.5-inch SAS3/SATA3 HDD/SSD and 4x SAS3/SATA3/NVMe Storage Devices | |
Cable 1 | CBL-PWEX-0673 | 3 | 8 pin female to 2x big 4 pin female power, 65/70CM, 18AWG,RoHS/REACH | |
Cable 2 | CBL-SAST-0701 | 3 | MINI SAS HD(ST)-MINI SAS(RA-RS EXIT),6G,INT,85CM,SB,30AWG,Ro | |
Riser Card | RSC-R1UW-E8R | 1 | 1U RHS WIO Riser card with one PCI-E x8 slot | |
Riser Card | RSC-R2UW-4E8 | 1 | 2U LHS WIO Riser card with four PCI-E x8 slots | |
Riser Card | RSC-S2-66 | 2 | 2U Passive Standard Riser Card with two PCI-E 3.0 x16 Slots, | |
Heatsink / Retention | SNK-P0067PS | 2 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
Heatsink / Retention | SNK-P0067PSMB | 2 | 1U Passive High Performance Front CPU Heat Sink w/ an 18-mm Wide Middle Air Channel for X11 Purley Platform Equipped w/ a Narrow Retention Mechanism/Bolster | |
Power Supply | PWS-1K62A-1R | 2 | AC-DC 1600W, Titanium Level, Redundancy, 1U, DC Output: +12V and +12Vs, 203 x 73.5 x 40 mm, AC Input: 90 - 264 VAC/47-63Hz, PMBus 1.2 with DSP controller,HF,RoHS/REACH | |
FAN 1 | FAN-0166L4 | 4 | 80x80x38 mm, 13.5K RPM, Optional Middle Cooling Fan for 2U Ultra Series Servers (Hot-swappable Version of FAN-0162L4) |
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
2.5" NVMe Drive Trays | MCP-220-00167-0B | $ 22.50 | 1 ~ 4 | Tool-less black hot-swap 2.5" NVMe drive tray (Orange tab, w/ key lock, clip design) | ||
2.5" NVMe Drive Trays | MCP-220-00127-0B | $ 20.00 | 0 | Black hot-swap 2.5" NVMe drive tray (Orange tab, w/ key lock) | ||
Add-on Card | AOC-VROCPREMOD | $ 342.50 | 0 | Intel VROC Premium, RAID 0, 1, 5, 10 | ||
Add-on Card | AOC-VROCSTNMOD | 0 | Intel VROC HW key (RSTe) standard upgrade module | |||
Frequency optimized and 205 watt CPU option kit | MCP-240-21904-0N-OEM | $ 79.50 | 1 | RSC bkt set (left, Mid/Right) for SC829/219U (LP),Tool-less | ||
Frequency optimized and 205 watt CPU option kit | SNK-P0068PS | $ 40.50 | 2 | 2U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | ||
2000w power supply kit | MCP-250-21802-0N | 0 | Power adapter bracket for 2K03P in SC218U,HF,RoHS/REACH | |||
2000w power supply kit | PWS-2K03P-1R | $ 489.50 | 0 | 1U 2000W Redundant Power Supply Platinum 73.5mm width | ||
Active Cooling GPU GPU power cable | GPU-NVQRTX8000 | $ 5,408.00 | -------- | NVIDIA PNY Quadro RTX8000 48GB GDDR6 PCIe 3.0 | ||
Active Cooling GPU GPU power cable | GPU-NVQRTX6000 | $ 3,999.00 | 1/GPU1/GPU | NVIDIA PNY Quadro RTX6000 24GB GDDR6 PCIe 3.0 | ||
Active Cooling GPU GPU power cable | GPU-NVQRTX5000 | 0 | NVIDIA PNY Quadro RTX5000 16GB GDDR6 PCIe 3.0 | |||
Active Cooling GPU GPU power cable | GPU-NVQRTX4000 | 0 | NVIDIA PNY Quadro RTX4000 8GB GDDR6 PCIe 3.0 | |||
Active Cooling GPU GPU power cable | GPU-NVK40C | 0 | NVIDIA Tesla K40 PCI-E 12GB GDDR5 | |||
Active Cooling GPU GPU power cable | GPU-NVQM6000 | 0 | NVIDIA PNY Quadro M6000 12GB GDDR5 PCIe 3.0 | |||
Active Cooling GPU GPU power cable | GPU-NVQM6000-24 | 0 | NVIDIA PNY Quadro M6000 24GB GDDR5 PCIe 3.0 | |||
Active Cooling GPU GPU power cable | GPU-NVQGV100 | 0 | NVIDIA PNY Quadro GV100 32GB HBM2 PCIe 3.0 | |||
Active Cooling GPU GPU power cable | CBL-PWEX-1042CBL-PWEX-1040 | 0 | GPU, 2x4F/CPU to 2x4F/CPU, P4.2, 50CM, 16AWG, 10A/pin, -40~105C | |||
Active Cooling GPU GPU power cable | - | 0 | GPU,2x4M/CPU to two (2x3F+2x1F)/PCIe,P4.2, 5CM,16/20AWG, 10.5A/pin(16AWG), 8A/pin(20AWG), -25~85C,RoHS | |||
CacheVault(s) | BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 | 0 | CacheVault for Broadcom 3108; Supercap mounting bracket for PCI-E location | |||
CacheVault(s) | BTR-TFM8G-LSICVM02 & MCP-240-00127-0N | 0 | CacheVault for Broadcom 3108; Supercap mounting bracket for 2.5" HDD location | |||
Network Card(s) | AOC-S40G-i2Q | $ 385.00 | 0 | Standard LP 2-port 40GbE controller, based on Intel Fortville XL710 | ||
Network Card(s) | AOC-SGP-i2 | 0 | Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2 | |||
Network Card(s) | AOC-SGP-i4 | 0 | Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350 | |||
Network Card(s) | AOC-STG-b4S | 0 | Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S | |||
Network Card(s) | AOC-STGN-i2S | $ 312.50 | 0 | Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES | ||
Network Card(s) | AOC-STGN-i1S | $ 175.00 | 0 | Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN | ||
Network Card(s) | AOC-STG-i2T | $ 312.50 | 0 | Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540 | ||
Global Services & Support | OS4HR3/2/1 | 0 | 3/2/1-year onsite 24x7x4 service | |||
Global Services & Support | OSNBD3/2/1 | 0 | 3/2/1-year onsite NBD service | |||
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |