- Products
- Multi Node
- Supermicro SYS-F619P2-RC1 Twin Barebone Dual CPU, 8-Node
Supermicro SYS-F619P2-RC1 Twin Barebone Dual CPU, 8-Node
Barebone 4U Rackmountable SuperServer, Dual Intel Xeon Scalable Processors 2nd Generation and Intel Xeon Scalable Processors, Intel C621 chipset, Up to 3TB DDR4 ECC 2933MHz memory, SAS3 via Broadcom 3108, HW RAID, 6 Hot-swap 2.5in drive bays, Flexible networking via SIOM Redundant 2200W Power Supply (CSE-F418BC2-R2K20BP + MBD-X11DPFR-SN)
1. Dual Socket P (LGA 3647) support 2nd Gen Intel® Xeon® Scalable processors (Cascade Lake/Skylake) ‡
2. 12 DIMMs; up to 3TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM, Supports Intel® Optane™ DCPMM ††
3. Expansion slots: 1 PCI-E 3.0 x16 (LP) 1 PCI-E 3.0 x16 (for SIOM )
4. 6 Hot-swap 2.5" SAS3/SATA3 or 2 Hot-swap 2.5" SAS3/SATA3 + 4 optional NVMe U.2 M.2 Interface: PCI-E 3.0 x4 M.2 Form Factor: 2260, 2280, 22110 M.2 Key: M-Key
5. SAS3 via Broadcom 3108, HW RAID
6. SIOM Network card, 1 dedicated IPMI LAN port
7. 1 VGA, 2 USB 3.0 ports
8. 3x 4cm 20k RPM middle fans
9. 2200W Redundant Power Supplies Titanium Level (96% Efficiency)
Extra Specifications for Supermicro SYS-F619P2-RC1 Twin Barebone Dual CPU, 8-Node
Motherboard | ||
Motherboard | Super X11DPFR-SN | |
Processor (per Node) | ||
CPU | Dual Socket P (LGA 3647) | |
2nd Gen Intel® Xeon® Scalable Processors and Intel® Xeon® Scalable Processors ‡ , Dual UPI up to 10.4GT/s | ||
Support CPU TDP 70-165W with IVR | ||
Cores | Up to 28 Cores | |
Note | ‡ BIOS version 3.2 or above is required to support 2nd Gen Intel® Xeon® Scalable processors (codenamed Cascade Lake-R) | |
System Memory (per Node) | ||
Memory Capacity | Supports Intel® Optane™ DCPMM †† | |
12 DIMM slots | ||
Up to 3TB 3DS ECC DDR4-2933MHz † RDIMM/LRDIMM | ||
Memory Type | 2933 † /2666/2400/2133MHz ECC DDR4 RDIMM/LRDIMM | |
Note | † 2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro †† Cascade Lake only. Contact your Supermicro sales rep for more info. | |
On-Board Devices | ||
Chipset | Intel® C621 chipset | |
SAS | SAS3 (12Gbps) via Broadcom 3108 | |
HW RAID | ||
Firmware Download | ||
Network Controllers | Flexible networking via SIOM | |
IPMI | Support for Intelligent Platform Management Interface v.2.0 | |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support | ||
Graphics | ASPEED AST2500 BMC | |
Input / Output (per node) | ||
SAS | 6 SAS3 (12Gbps) ports | |
NVMe | 4 NVMe U.2 option | |
LAN | 1 RJ45 Dedicated IPMI LAN port | |
SIOM flexible Network card | ||
USB | 2 USB 3.0 ports (rear) | |
VGA | 1 VGA port | |
System BIOS | ||
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS | |
Management | ||
Software | Watch Dog | |
KVM with dedicated LAN | ||
SuperDoctor® 5 | ||
Intel® Node Manager | ||
IPMI 2.0 | ||
Power Configurations | ACPI Power Management | |
PC Health Monitoring | ||
CPU | 4+1 Phase-switching voltage regulator | |
Monitors for CPU Cores, Chipset Voltages, Memory. | ||
FAN | Status monitor for speed control | |
Pulse Width Modulated (PWM) fan connectors | ||
Fans with tachometer monitoring | ||
Temperature | Monitoring for CPU and chassis environment | |
Thermal Control for fan connectors | ||
Chassis | ||
Form Factor | 4U Rackmount | |
Model | CSE-F418BC2-R2K20BP | |
Dimensions and Weight | ||
Width | 17.63" (448mm) | |
Height | 6.96" (177mm) | |
Depth | 29" (737mm) | |
Package | 28.3" (W) x 15.0" (H) x 42.4" (D) | |
Weight | Net Weight: 150 lbs (68.04 kg) | |
Gross Weight: 200 lbs (90.71 kg) | ||
Available Colors | Black | |
Front Panel | ||
Buttons | Power On/Off button | |
UID button | ||
LEDs | Network activity LEDs | |
Hard drive activity LED | ||
Power status LED | ||
Information LED (UID, Fan failure, Overheat) | ||
Expansion Slots (per node) | ||
PCI-Express | 1 PCI-E 3.0 x16 (SIOM) | |
1 PCI-E 3.0 x16 (Low-profile) | ||
Drive Bays (per node) | ||
Hot-swap | 6 Hot-swap 2.5" SAS3/SATA3 or 2 Hot-swap 2.5" SAS3/SATA3 + 4 optional NVMe U.2 | |
M.2 | M.2 Form Factor: 2260, 2280, 22110 | |
M.2 Key: M-Key | ||
M.2 Interface: PCI-E 3.0 x4 | ||
Backplane | ||
Backplane | 1 SAS/SATA backplane | |
System Cooling (per node) | ||
Fans | 3x 4cm 20k RPM middle fans | |
Power Supply | ||
Power Supply | 2200W Redundant Power Supplies with PMBus | |
Total Output Power and Input | 1200W with Input 100-127Vac | |
1800W with Input 200-220Vac | ||
1980W with Input 220-230Vac | ||
2090W with Input 230-240Vac | ||
2200W with Input 220-240Vac (for UL/cUL use only) | ||
2090W with Input 230-240Vdc (for CCC only) | ||
AC Input Frequency | 50-60Hz | |
Dimension (W x H x L) | 76 x 40 x 336 mm | |
+12V | Max: 150A / Min: 0A (200-220Vac) | |
Max: 165A / Min: 0A (220-230Vac) | ||
Max: 100A / Min: 0A (100-127Vac) | ||
Max: 174.17A / Min: 0A (230-240Vac) | ||
Max: 183.3A / Min: 0A (220-240Vac) | ||
5VSB | Max: 1A / Min: 0A | |
Output Type | Backplanes (gold finger) | |
Certification | Titanium Level | |
Operating Environment | ||
RoHS | RoHS Compliant | |
Environmental Spec. | Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F) | |
Operating Relative Humidity: 8% to 90% (non-condensing) | ||
Non-operating Relative Humidity: 5% to 95% (non-condensing) | ||
Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) | ||
Product SKUs | ||
Product SKUs | SuperServer F619P2-RC1 (Black) |
Name | Part Number | Qty. | Description | |
---|---|---|---|---|
Motherboard / Chassis | MBD-X11DPFR-SN | 8 | Super X11DPFR-SN Motherboard | |
Motherboard / Chassis | CSE-F418BC2-R2K20BP | 1 | 4U Chassis | |
Backplane | BPN-ADP-8S3108-1UF | 8 | Avago (LSI) 3108 adapter card for X10 FatTwin Rear I/O motherboards. Adapter card includes TFM module port and x8 SAS3 ports via x2 Mini-SAS HD connectors,HF,RoHS/REACH | |
Backplane | BPN-ADP-X11DPFR | 8 | Power distribution board for X11DPFR-S(N) | |
Backplane | BPN-SAS3-F418-B6N4 | 8 | 6-Port Hybrid Backplane Supports 2x2.5â SAS3/SATA3 HDD/SDD and 4x2.5â SAS3/SATA3/NVMe Storage Devices for FatTwin Platform | |
Cable 1 | CBL-0486L | 16 | 2x2 to 2x2 15cm power cable HF. 18AWG | |
Cable 2 | CBL-OTHR-0022L | 8 | 20 to 20 pin cable for BPN-ADP-F418LS,7.5cm, 28AWG,RoHS/REACH,PBF | |
Cable 3 | CBL-PWCD-0578 | 4 | PWCD,US,IEC60320 C14 TO C13,3FT,14AWG | |
Cable 4 | CBL-SAST-0697 | 16 | MINI SAS HD,12G,INT,6CM,30AWG | |
Riser Card | RSC-RR1U-E16 | 8 | RSC-RR1U-E16 with PIC-E x16 output | |
Heatsink / Retention | SNK-P0067PS | 8 | 1U Passive CPU Heat Sink for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
Heatsink / Retention | SNK-P0067PSM | 8 | 1U Passive CPU Heat Sink with a 26-mm Wide Middle Air Channel for X11 Purley Platform Equipped with a Narrow Retention Mechanism | |
Power Supply | PWS-2K20A-1R | 4 | 1U 2200W Redundant, Titanium, 76(W) X 40(H) X 336(L) mm |
Name | Part Number | Price | Add to Cart | Qty. | Description | |
---|---|---|---|---|---|---|
Super Cap for LSI 3108 | 1x BTR-TFM8G-LSICVM02 & 1x BKT-BBU-BRACKET-05 | 0 | LSI Supercap w 8GB CV 24 cable (whole kit) & Supercap mounting bracket for PCI-E location | |||
CacheVault Kit | BTR-CV3108-FT1 | $ 322.00 | 1/node | CacheVault kit for FatTwin Broadcom 3108 card. Includes: TFM, cables, brackets and supercap | ||
Cable | CBL-SAST-1002-1 | $ 27.00 | 0 | 4/node to enable NVMe | ||
Software | SFT-OOB-LIC • | 1 | OOB Management Package (per node license) | |||
Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
Warranty: | 3 years labor, 1 year parts, 1 year advance replacement (doa) |
Coverage: | Replacement or repair |
Average Service Time: | Overnight replacement for 1 year, 2 weeks afterward |
E-mail: | returnservices@wiredzone.com |
If you need Technical Support for this item please contact: | |
Provider: | Supermicro |
Type of Support: | FULL |
Phone No.: | 408-503-8000 |
URL: | Click here for Manufacturer Website |